Advertisement

Acta Neurochirurgica

, Volume 161, Issue 6, pp 1255–1259 | Cite as

Gentamicin loading of calcium phosphate implants: implications for cranioplasty

  • Jimmy SundblomEmail author
  • Sara Gallinetti
  • Ulrik Birgersson
  • Håkan Engqvist
  • Lars Kihlström
Open Access
Original Article - Neurosurgery general
Part of the following topical collections:
  1. Neurosurgery general

Abstract

Background

Surgical site infections (SSI) are a significant risk in cranioplasty, with reported rates of around 8–9%. The most common bacteria associated with these nosocomial infections are of the Staphylococcus species, which have the ability to form biofilm. The possibility to deliver antibiotics, such as gentamicin, locally rather than systemically could potentially lower the early postoperative SSI. Various antibiotic dosages are being applied clinically, without any true consensus on the effectiveness.

Methods

Drug release from calcium phosphate (CaP), polyetheretherketone (PEEK), and titanium (Ti) samples was evaluated. Microbiological studies with Staphylococcus aureus (SA) and Staphylococcus epidermidis (SE) including strains from clinical infection were used to establish clinically relevant concentrations.

Results

The CaP samples were able to retain and release gentamicin overtime, whereas the Ti and PEEK samples did not show any drug uptake or release. A gentamicin loading concentration of 400 μg/ml was shown to be effective in in vitro microbiological studies with both SA and SE.

Conclusions

Out of the three materials studied, only CaP could be loaded with gentamicin. An initial loading concentration of 400 μg/ml appears to establish an effective gentamicin concentration, possibly translating into a clinical benefit in cranioplasty.

Keywords

Gentamicin Calcium phosphate Titanium PEEK Staphylococcus Uptake-release 

Abbreviations

ATCC

American Type Culture Collection

BET

Brunnauer–Emmet–Teller method

CaP

Calcium phosphate

CFU

Colony-forming unit

EU

European Union

PEEK

Polyetheretherketone

SA

Staphylococcus aureus

SE

Staphylococcus epidermidis

SSA

Specific surface area

SSI

Surgical site infections

Ti

Titanium

US

United States of America

Introduction

Surgical site infections (SSI) in cranioplasty pose a significant risk with reported rates of around 8–9% [1, 2, 3, 4, 5, 6, 7]. The most common bacteria associated with nosocomial infections are of the Staphylococcus species. Out of these, the most predominant are Staphylococcus epidermidis (SE) and Staphylococcus aureus (SA) [4, 8, 9]. They are generally carried asymptomatically on the skin, especially in moist skin regions [4, 8, 9, 10]. Both SE [11] and SA [12] bacteria strains are able to form biofilms, which was recently associated with 65% of all the microbial bone infections treated by clinicians in the developed world [13]. Host immune responses against persistent biofilm infections are largely ineffective and can lead to chronic infection, which is associated with difficult post-op treatments [12]. Antibiotic prophylaxis is usually administered before cranioplasty, even though its use is still debated, due to the risk of creating resistant strains if administrated inadequately [14].

Antibiotics can be delivered both systemically and/or locally. The advantages of local administration over systemic are lower cost, lower risk of toxicity, and significantly higher concentrations of antibiotics at the desired site [15]. Loading a device with antibiotics could allow for a lower systemic concentration while obtaining the same effect locally, reducing the drawbacks of systemic delivery, including development of resistant strains. For these reasons, local delivery of drugs has been applied into different applications, such as in orthopedics or dentistry [16, 17]. In order to obtain an effective treatment as well as limiting the drugs cytotoxic effects, a critical concentration between 8 to 16 μg/ml and 100 μg/ml seems to be necessary [11, 18, 19, 20, 21, 22, 23].

Calcium phosphate (CaP) cements have been loaded with vancomycin and gentamicin in order to decrease the number of bone infections, especially in orthopedics [16]. The antibiotics have been added to the cement either in liquid form [24, 25] or as a solid phase [26, 27]. Antibiotic immersion of titanium (Ti) implants such as pedicle screws used in spine surgery has been tested and showed decreased rates of SSI [28]. Gentamicin is one of the most commonly used antibiotics in cranioplasty and the focus of this paper. While efficient against infections, gentamicin has been shown to negatively influence cell proliferation [19, 20, 22] making the tuning of the concentration vital.

The aim of the study was to evaluate the drug uptake and release for the three most widespread commercially available materials used for patient-specific custom-made implants for cranioplasty, namely CaP, polyetheretherketone (PEEK), and Ti, and to test the bactericidal effect against strains of SA and SE.

Material and methods

In vitro studied materials

Hexagonal CaP cement tiles (OssDsign AB) composed of monetite, calcium pyrophosphate and beta tricalcium phosphate [29], and medical grade PEEK (ESSADE AB) and Ti medical grade 5 (Livallco stål AB) discs with diameter Φ = 10 mm and height h = 6 mm were purchased. All samples were steam sterilized.

The porosity was measured using the Archimedes method in distilled water [30]. Specific surface area (SSA) of CaP was determined by nitrogen adsorption at 77 K according to the Brunnauer–Emmet–Teller method (BET) [31] in an ASAP 2020 (Micromeritics).

Gentamicin in vitro uptake-release

Gentamicin (Sanofi AB) was mixed with Ringer’s solution (Baxter) at concentrations of 200 μg/ml and 400 μg/ml. The drug concentrations were tested for CaP, PEEK, and Ti. Samples were loaded by soaking in the solution at room temperature for 15 min (time to reach saturation). Control samples were soaked in Ringer’s only.

The samples were transferred after loading into 4 ml PBS solution (Sigma Aldrich) at 37 °C for the release with slow orbital media agitation. Two hundred microliter samples were withdrawn after 0.5 h, 1 h, 2 h, 4 h, 6 h, 24 h, and 48 h and replaced with fresh media at 37 °C. The samples were stored at 4 °C protected from light prior to analysis. Gentamicin amount was quantified using a colorimetric method using spectrophotometry based on o–phthaldialdehyde reaction with gentamicin amino groups (Sampath [32] with modifications by Zhang [33]) considering the volume sampling.

Agar diffusion test

Gentamicin solutions in Ringer’s (Baxter) were prepared at concentrations of 200 μg/ml and 400 μg/ml. The solutions were filtered with a 0.2-μm sterile filter (Thermo Fisher Scientific). Control samples were loaded with Ringer solution only. Three different bacteria strains were tested: Pharmacopeia US and EU standard for Staphylococcus aureus (SA, ATCC 6538) and Staphylococcus epidermidis (SE, ATCC 14990), and a SA strain derived from a clinical case of postoperative infection including empyema after revision cranioplasty with custom made calcium phosphate implant (OssDsign AB). Subsequent revision with an identical implant was uneventful. Gentamicin soaking of the implant was performed at both surgical procedures, but postoperative images after initial surgery revealed significant dead space beneath the cranioplasty.

Bacteria were seeded at a concentration of 106 CFU on agar (ISO-SENSITEST AGAR, Oxoid) plates. The plates were incubated at 32.5 ± 2.5 °C for 20 h. The inhibition zones were calculated and compared with the performance standards for antimicrobial susceptibility testing according to the Clinical and Laboratory Standard Institute (2013).

Statistics

Statistical differences were determined using one-way ANOVA with Tukey’s post-hoc test (95%) using Minitab 18 software (Minitab Inc., State College, PA). Statistical significance was indicated when p < 0.05.

Results

Material characterization

Total porosity of CaP cement was 42.3% ± 1.4%, PEEK was 0.5% ± 0.5%, while the one of titanium (Ti) was 0.7% ± 0.3%. CaP are intrinsically porous, which allows aqueous solution uptake. This porous microstructure of the CaP and its interlocking crystals gives a surface area of approximately 4 m2/g.

Antibiotic release

The release profile of the antibiotic for CaP was characterized by a burst release within the first 24 h of 48 ± 10% for 200 μg/ml and 39 ± 7% for 400 μg/ml, followed by a gradual stabilization. Within the timeframe, no measurable drug degradation occurred. Zero to minimal release was measured for Ti and PEEK (Fig. 1).
Fig. 1

Release from CaP tiles (CaP 200 μg/ml), PEEK (PEEK 200 μg/ml), and Ti (Ti 200 μg/ml) loaded with a gentamicin solution of 200 μg/ml; and CaP (CaP 400 μg/ml), PEEK (PEEK 400 μg/ml), and Ti (Ti 400 μg/ml), respectively, loaded with a gentamicin solution of 400 μg/ml displayed as a percentage released and b amount of drug released

Agar diffusion tests for CaP showed that there was a slight difference in the inhibition zone at low concentrations but not significant (p > 0.05), as expected, the higher the concentration, the wider the inhibition zone. Here, it is noteworthy that the SA strain derived from the patient was less sensitive to the drug than ATCC 6538 but still in the range of sensitivity. For the SE strain, both gentamicin concentrations used for loading the CaP were effective.

Discussion

In comparison to solid implants, a major advantage of a porous material is its ability to absorb liquids, allowing them to be used as drug carriers. By pre-loading a cranial implant, local delivery of antibiotics can be achieved which is more effective and less harmful for the body [16].

In this study, the CaP material characteristics result in a large surface area which facilitates a reasonably quick drug uptake (saturation is reached after 15 min soaking in aqueous solution), while in the case of both PEEK and titanium gentamicin loading remains difficult to achieve. Whether this immediately translates to a clinical advantage is possible but has not been addressed in this study.

The release profile of gentamicin for CaP was characterized by a burst release within the first 24 h followed by a gradual stabilization. Noteworthy, the CaP retained a high amount of gentamicin, likely due to a strong affinity of the drug to the sample, which is similar to the observations made by Canal et al. [34] for a different drug with a similar CaP composition. Therefore, the loading and release profile for different antibiotics and concentrations has to be evaluated in vitro to ensure that clinically relevant concentrations can be obtained in vivo. Even though it did not come as a surprise that there was no gentamicin uptake or release for both titanium and PEEK, however, they were still evaluated in this study as it remains common practice to pre-treat different metal [28] and plastic implants in the OR with antibiotics even if its efficacy is mostly unknown.

An initial concentration of 400 μg/ml for the CaP implant would not be harmful for the cells as this would translate into a concentration of approximately 80 μg/ml after 6 h given that in the first 6 h around 40% of the drug is released and diluted by half when taking the space between the skin and dura and inter-tile spaces into consideration. In the presence of additional dead space, the gentamicin concentration would be further diluted and thus impacting the drug’s efficacy. In clinical use, many other factors could possibly influence the drug concentration, such as the use of wound drain, drug absorption by surrounding vascularized tissue, and use of suction during wound closure, making the systematic use of this feature of CaP implants contingent on further in vivo studies and randomized trials.

Conclusions

Out of the three clinically used, and here studied, materials only CaP could be loaded with gentamicin. This observed feature may create a substantial clinical opportunity in cranioplasty with potential of limiting the number of infections. An initial loading concentration of 400 μg/ml can potentially reduce surgical site infections, establishing an effective localized gentamicin concentration sustained over time. To truly appraise the potential clinical benefits of gentamicin loading, a randomized trial is needed.

Notes

Compliance with ethical standards

Conflict of interest

Dr. Sundblom has no financial disclosures. Drs. Kihlström and Engqvist have consulting agreements with OssDsign. Dr. Engqvist has direct ownership in OssDsign. Drs. Gallinetti and Birgersson report personal fees from OssDsign both during the conduct of the study and outside the submitted work.

Ethical approval

This article does not contain any studies with human participants performed by any of the authors.

Informed consent

Informed consent was obtained from the patient from which the patient-derived bacterial strain was obtained.

References

  1. 1.
    Antoci V, King SB, Jose B et al (2007) Vancomycin covalently bonded to titanium alloy prevents bacterial colonization. J Orthop Res 25(7):858–866CrossRefGoogle Scholar
  2. 2.
    Brommeland T, Nicolay Rydning P, Hugo Pripp A, Helseth E (2015) Cranioplasty complications and risk factors associated with bone flap resorption. Scand J Trauma Resusc Emerg Med 23:1–7CrossRefGoogle Scholar
  3. 3.
    Esteban J, Pérez-Tanoira R, Pérez-Jorge-Peremarch C, Gómez-Barrena E (2014) Bacterial adherence to biomaterials used in surgical procedures. Microbiol. Surg. Infect. Elsevier, pp 41–57Google Scholar
  4. 4.
    Hetrick EM, Schoenfisch MH (2006) Reducing implant-related infections: active release strategies. Chem Soc Rev 35(9):780–789CrossRefGoogle Scholar
  5. 5.
    Liu H, Dong X, Yin Y, Chen Z, Zhang J (2017) Reduction of surgical site infections after cranioplasty with perioperative bundle. J Craniofac Surg 28(6):1408–1412CrossRefGoogle Scholar
  6. 6.
    Sundseth J, Sundseth A, Berg-Johnsen J, Sorteberg W, Lindegaard KF (2014) Cranioplasty with autologous cryopreserved bone after decompressive craniectomy. Complications and risk factors for developing surgical site infection. Acta Neurochir 156(4):805–811CrossRefGoogle Scholar
  7. 7.
    Worm P, do Nascimento T, do Couto Nicola F, Sanches E, dos Santos Moreira C, Rogério LW, dos Reis M, Finger G, Collares MM (2016) Polymethylmethacrylate imbedded with antibiotics cranioplasty: an infection solution for moderate and large defects reconstruction. Surg Neurol Int 7(29):746–751CrossRefGoogle Scholar
  8. 8.
    Becker K, Heilmann C, Peters G (2014) Coagulase-negative staphylococci. Clin Microbiol Rev 27(4):870–926CrossRefGoogle Scholar
  9. 9.
    Morton RP, Abecassis IJ, Hanson JF et al (2016) Predictors of infection after 754 cranioplasty operations and the value of intraoperative cultures for cryopreserved bone flaps. J Neurosurg 125(3):766–770CrossRefGoogle Scholar
  10. 10.
    Otto M (2010) Staphylococcus colonization of the skin and antimicrobial peptides. Expert Rev Dermatol 5(2):183–195CrossRefGoogle Scholar
  11. 11.
    Curtin J, Cormican M, Fleming G, Keelehan J, Colleran E (2003) Linezolid compared with eperezolid, vancomycin, and gentamicin in an in vitro model of antimicrobial lock therapy for Staphylococcus epidermidis central venous catheter-related biofilm infections. Antimicrob Agents Chemother 47(10):3145–3148CrossRefGoogle Scholar
  12. 12.
    Archer NK, Mazaitis MJ, Costerton JW, Leid JG, Powers ME, Shirtliff ME (2011) Staphylococcus aureus biofilms. Virulence 2(5):445–459CrossRefGoogle Scholar
  13. 13.
    Stoodley P, Ehrlich GD, Sedghizadeh PP, Hall-Stoodley L, Baratz ME, Altman DT, Sotereanos NG, Costerton JW, Demeo P (2011) Orthopaedic biofilm infections. Curr Orthop Pract 22(6):558–563CrossRefGoogle Scholar
  14. 14.
    Cao YY, Pu K, Li G, Yan XJ, Ma Y, Xue K, Sun ZM, Li QG (2017) The role of antibiotic prophylaxis in clean neurosurgery. World Neurosurg 100:305–310CrossRefGoogle Scholar
  15. 15.
    Gogia JS, Meehan JP, Di Cesare PE, Jamali AA (2009) Local antibiotic therapy in osteomyelitis. Semin Plast Surg 23(2):100–107CrossRefGoogle Scholar
  16. 16.
    Ginebra M-PP, Canal C, Espanol M, Pastorino D, Montufar EB (2012) Calcium phosphate cements as drug delivery materials. Adv Drug Deliv Rev 64(12):1090–1110CrossRefGoogle Scholar
  17. 17.
    McNally MA, Ferguson JY, Lau ACK, Diefenbeck M, Scarborough M, Ramsden AJ, Atkins BL (2016) Single-stage treatment of chronic osteomyelitis with a new absorbable, gentamicin-loaded, calcium sulphate/hydroxyapatite biocomposite. Bone Joint J 98–B(9):1289–1296Google Scholar
  18. 18.
    Bortolin M, Bidossi A, De Vecchi E, Avveniente M, Drago L (2017) In vitro antimicrobial activity of chlorquinaldol against microorganisms responsible for skin and soft tissue infections: comparative evaluation with gentamicin and fusidic acid. Front Microbiol 8:1–10CrossRefGoogle Scholar
  19. 19.
    Isefuku S, Joyner CJ, Simpson AHRW (2003) Gentamicin may have an adverse effect on osteogenesis. J Orthop Trauma 17(3):212–216CrossRefGoogle Scholar
  20. 20.
    Miclau T, Edin M, Lester G, Lindsey R, Dahners L (1995) Bone toxicity of locally applied aminoglycosides. J Orthop Trauma 9(5):401–406CrossRefGoogle Scholar
  21. 21.
    Oshima M, Hashigughi M, Shindo N, Shibata S (1986) Biochemical the uptake mechanisms of aminoglycoside by cultured enzyme cell toxicity . fibroblasts of gentamicin of lysosomal the alteration activities 1 clinical research institute , National Medical Center , In Order to study the toxicity of aminoglycos. J Biochem 100(6):1575–1582CrossRefGoogle Scholar
  22. 22.
    Rathbone CR, Cross JD, Brown KV, Murray CK, Wenke JC (2011) Effect of various concentrations of antibiotics on osteogenic cell viability and activity. J Orthop Res 29(7):1070–1074CrossRefGoogle Scholar
  23. 23.
    Tam VH, Kabbara S, Vo G, Schilling AN, Coyle EA (2006) Comparative pharmacodynamics of gentamicin against Staphylococcus aureus and Pseudomonas aeruginosa. Antimicrob Agents Chemother 50(8):2626–2631CrossRefGoogle Scholar
  24. 24.
    Bohner M, Lemaître J, Van LP, Zambelli P-Y, Merkle HP, Gander B (1997) Gentamicin-loaded hydraulic calcium phosphate bone cement as antibiotic delivery system. J Pharm Sci 86(5):565–572CrossRefGoogle Scholar
  25. 25.
    Su WY, Chen YC, Lin FH (2013) A new type of biphasic calcium phosphate cement as a gentamicin carrier for osteomyelitis. Evidence-based Complement Altern Med 2013:1–9Google Scholar
  26. 26.
    Jiang P-J, Patel S, Gbureck U, Caley R, Grover LM (2009) Comparing the efficacy of three bioceramic matrices for the release of vancomycin hydrochloride. J Biomed Mater Res Part B Appl Biomater 93(B):51–58Google Scholar
  27. 27.
    Vorndran E, Geffers M, Ewald A, Lemm M, Nies B, Gbureck U (2013) Ready-to-use injectable calcium phosphate bone cement paste as drug carrier. Acta Biomater 9(12):9558–9567CrossRefGoogle Scholar
  28. 28.
    Eren B, Karag F, Ozkan N, Korkut C (2018) Turcica the effectiveness of pedicle screw immersion in vancomycin and ceftriaxone solution for the prevention of postoperative spinal infection : a prospective comparative study. Acta Orthopaedica et Traumatologica 52:289–293CrossRefGoogle Scholar
  29. 29.
    Kihlström Burenstam Linder L, Birgersson U, Lundgren K, Illies C, Engstrand T (2019) Patient-specific titanium-reinforced calcium phosphate implant for the repair and healing of complex cranial defects. World Neurosurg 122:e399-407Google Scholar
  30. 30.
    Ajaxon I, Maazouz Y, Ginebra MP, Öhman C, Persson C (2015) Evaluation of a porosity measurement method for wet calcium phosphate cements. J Biomater Appl 30(5):526–536CrossRefGoogle Scholar
  31. 31.
    Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60(2):309–319CrossRefGoogle Scholar
  32. 32.
    Sampath SS, Robinson DH (1990) Comparison of new and existing spectrophotometric methods for the analysis of tobramycin and other aminoglycosides. J Pharm Sci 79(5):428–431CrossRefGoogle Scholar
  33. 33.
    Zhang X, Wyss UP, Pichora D, Goosen MF (1994) Biodegradable controlled antibiotic release devices for osteomyelitis: optimization of release properties. J Pharm Pharmacol 46(9):718–724CrossRefGoogle Scholar
  34. 34.
    Canal C, Khurana K, Gallinetti S, Bhatt S, Pulpytel J, Arefi-Khonsari F, Ginebra M-PMP (2016) Design of calcium phosphate scaffolds with controlled simvastatin release by plasma polymerisation. Polym (United Kingdom) 92:170–178Google Scholar

Copyright information

© The Author(s) 2019

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Authors and Affiliations

  1. 1.Department of Neuroscience, NeurosurgeryUppsala University HospitalUppsalaSweden
  2. 2.Department of Engineering Sciences, Applied Materials Science DivisionUppsala UniversityUppsalaSweden
  3. 3.Department of Clinical Science, Intervention and Technology, Division of Imaging and TechnologyKarolinska InstitutetHuddingeSweden
  4. 4.Department of Neurosurgery, Clinical NeurosciencesKarolinska University Hospital and Karolinska InstitutetStockholmSweden

Personalised recommendations