Advertisement

Microchimica Acta

, 186:67 | Cite as

Nitrogen-doped carbon dots with high quantum yield for colorimetric and fluorometric detection of ferric ions and in a fluorescent ink

  • Xu Zhou
  • Genfu Zhao
  • Xiaoping Tan
  • Xingcan Qian
  • Ting Zhang
  • Jingwei Gui
  • Long Yang
  • Xiaoguang Xie
Original Paper
  • 60 Downloads

Abstract

Nitrogen-doped carbon dots (N-CDs) with a quantum yield of 41 ± 3% and excellent stability were prepared and are shown to be viable probes for the determination of ferric ions, which is a strong quencher of fluorescence. The absorption peak of the N-CDs is located at 325 nm. The optimal excitation and emission wavelengths of the N-CDs are 340 nm and 430 nm, respectively. The fluorometric response to Fe(III) is linear in the ranges between 1.0 and 21.0 μM and between 0.05 and 30.0 μM, and the limits of detection are 0.28 μM in case of colorimetry and 13.5 nM in case of fluorometry. Quenching by Fe(III) is mainly attributed to a combination of chelation (static quenching) and inner filter effect. The N-CDs also can be used as a new sort of fluorescent ink owing to the strong luminous performance and chemical inertness.

Graphic abstract

The illustration for synthesis of the N-CDs and its applications for colorimetric and fluorescent detection of Fe3+ and fluorescent ink.

Keywords

Photoluminescence Quenching mechanism Stern-Volmer plot Static quenching Inner filter effect Coordination interaction Fluorescence lifetime Isoelectric point Zeta potential Hydrothermal method 

Notes

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (No. 21864024), the Program for Leading Talents, Department of Science and Technology of Yunnan Province (grant no. 2017HA013) and the Basic Research Project of Science and Technology Commission of Chongqing (grant no. cstc2017jcyjA0656 and cstc2017jcyjAX0031).

Compliance with ethical standards

The author(s) declare that they have no competing interests.

Supplementary material

604_2018_3176_MOESM1_ESM.docx (6 mb)
ESM 1 (DOCX 5.95 mb)

References

  1. 1.
    Lohani CR, Lee K-H (2010) The effect of absorbance of Fe3+ on the detection of Fe3+ by fluorescent chemical sensors. Sensors Actuators B Chem 143:649–654Google Scholar
  2. 2.
    Chereddy NR, Suman K, Korrapati PS, Thennarasu S, Mandal AB (2012) Design and synthesis of rhodamine based chemosensors for the detection of Fe3+ ions. Dyes Pigments 95:606–613Google Scholar
  3. 3.
    Zhu X, Zhang Z, Xue Z, Huang C, Shan Y, Liu C, Qin X, Yang W, Chen X, Wang T (2017) Understanding the selective detection of Fe3+ based on graphene quantum dots as fluorescent probes: the Ksp of a metal hydroxide-assisted mechanism. Anal Chem 89:12054–12058PubMedGoogle Scholar
  4. 4.
    Liu W, Diao H, Chang H, Wang H, Li T, Wei W (2017) Green synthesis of carbon dots from rose-heart radish and application for Fe3+ detection and cell imaging. Sensors Actuators B Chem 241:190–198Google Scholar
  5. 5.
    He Y-H, Lai J-P, Sun H, Chen Z-M, Lan S (2016) A fast, sensitive and stable fluorescent fiber-optic chemosensor for quantitative detection of Fe3+ in real water and HepG2 living cells. Sensors Actuators B Chem 225:405–412Google Scholar
  6. 6.
    Wang J, Lin W, Li W (2012) Single fluorescent probe displays a distinct response to Zn2+ and Cd2+. Chem Eur J 18:13629–13632PubMedGoogle Scholar
  7. 7.
    Yeo HM, Ryu BJ, Nam KC (2008) A novel fluoride ion colorimetric chemosensor. Org Lett 10:2931–2934PubMedGoogle Scholar
  8. 8.
    Li S, Li Y, Cao J, Zhu J, Fan L, Li X (2014) Sulfur-doped graphene quantum dots as a novel fluorescent probe for highly selective and sensitive detection of Fe3+. Anal Chem 86:10201–10207PubMedGoogle Scholar
  9. 9.
    Jeong JW, Rao BA, Son Y-A (2015) Rhodamine-chloronicotinaldehyde-based “OFF-ON” chemosensor for the colorimetric and fluorescent determination of Al3+ ions. Sensors Actuators B Chem 208:75–84Google Scholar
  10. 10.
    Zhang J, Yu S-H (2016) Carbon dots: large-scale synthesis, sensing and bioimaging. Mater Today 19:382–393Google Scholar
  11. 11.
    Xia J, Zhuang Y-T, Yu Y-L, Wang J-H (2017) Highly fluorescent carbon polymer dots prepared at room temperature, and their application as a fluorescent probe for determination and intracellular imaging of ferric ion. Microchim Acta 184:1109–1116Google Scholar
  12. 12.
    Sun Y, Wang X, Wang C, Tong D, Wu Q, Jiang K, Jiang Y, Wang C, Yang M (2018) Red emitting and highly stable carbon dots with dual response to pH values and ferric ions. Microchim Acta 185:83–90Google Scholar
  13. 13.
    Wang F, Hao Q, Zhang Y, Xu Y, Lei W (2016) Fluorescence quenchometric method for determination of ferric ion using boron-doped carbon dots. Microchim Acta 183:273–279Google Scholar
  14. 14.
    Zhu S, Meng Q, Wang L, Zhang J, Song Y, Jin H, Zhang K, Sun H, Wang H, Yang B (2013) Highly photoluminescent carbon dots for multicolor patterning, sensors, and bioimaging. Angew Chem Int Ed 125:4045–4049Google Scholar
  15. 15.
    Sun D, Ban R, Zhang P-H, Wu G-H, Zhang J-R, Zhu J-J (2013) Hair fiber as a precursor for synthesizing of sulfur- and nitrogen-co-doped carbon dots with tunable luminescence properties. Carbon 64:424–434Google Scholar
  16. 16.
    Dong Y, Shao J, Chen C, Li H, Wang R, Chi Y, Lin X, Chen G (2012) Blue luminescent graphene quantum dots and graphene oxide prepared by tuning the carbonization degree of citric acid. Carbon 50:4738–4743Google Scholar
  17. 17.
    Qu S, Wang X, Lu Q, Liu X, Wang L (2012) A biocompatible fluorescent ink based on water-soluble luminescent carbon nanodots. Angew Chem Int Ed 51:12215–12218Google Scholar
  18. 18.
    Liu R, Wu D, Liu S, Koynov K, Knoll W, Li Q (2009) An aqueous route to multicolor photoluminescent carbon dots using silica spheres as carriers. Angew Chem Int Ed 121:4668–4671Google Scholar
  19. 19.
    Wu ZL, Gao MX, Wang TT, Wan XY, Zheng LL, Huang CZ (2014) A general quantitative pH sensor developed with dicyandiamide N-doped high quantum yield graphene quantum dots. Nanoscale 6:3868–3874PubMedGoogle Scholar
  20. 20.
    Chen Y, Wu Y, Weng B, Wang B, Li C (2016) Facile synthesis of nitrogen and sulfur co-doped carbon dots and application for Fe(III) ions detection and cell imaging. Sensors Actuators B Chem 223:689–696Google Scholar
  21. 21.
    Jiang K, Sun S, Zhang L, Lu Y, Wu A, Cai C, Lin H (2015) Red, green, and blue luminescence by carbon dots: full-color emission tuning and multicolor cellular imaging. Angew Chem Int Ed 54:1–5Google Scholar
  22. 22.
    Sun X, He J, Meng Y, Zhang L, Zhang S, Ma X, Dey S, Zhao J, Lei Y (2016) Microwave-assisted ultrafast and facile synthesis of fluorescent carbon nanoparticles from a single precursor: preparation, characterization and their application for the highly selective detection of explosive picric acid. J Mater Chem A 4:4161–4171Google Scholar
  23. 23.
    Guo Y, Cao F, Li Y (2018) Solid phase synthesis of nitrogen and phosphor co-doped carbon quantum dots for sensing Fe3+ and the enhanced photocatalytic degradation of dyes. Sensors Actuators B Chem 225:1105–1111Google Scholar
  24. 24.
    Li XM, Rui MC, Song JZ, Shen ZH, Zeng HB (2015) Carbon and graphene quantum dots for optoelectronic and energy devices: a review. Adv Funct Mater 25:4929–4947Google Scholar
  25. 25.
    Zhou S, Zhang M, Yang F, Wang F, Wang C (2017) Facile synthesis of water soluble fluorescent metal (Pt, au, ag and cu) quantum clusters for the selective detection of Fe3+ ions as both fluorescent and colorimetric probes. J Mater Chem C 5:2466–2473Google Scholar
  26. 26.
    Wei T-B, Zhang P, Shi B-B, Chen P, Lin Q, Liu J, Zhang Y-M (2013) A highly selective chemosensor for colorimetric detection of Fe3+ and fluorescence turn-on response of Zn2+. Dyes Pigments 97:297–302Google Scholar
  27. 27.
    Jang HJ, Ahn HM, Kim MS, Kim C (2017) A highly selective colorimetric chemosensor for sequential detection of Fe3+ and pyrophosphate in aqueous solution. Tetrahedron 73:6624–6631Google Scholar
  28. 28.
    Liu Y, Duan W, Song W, Liu J, Ren C, Wu J, Liu D, Chen H (2017) Red emission B, N, S-co-doped carbon dots for colorimetric and fluorescent dual mode detection of Fe3+ ions in complex biological fluids and living cells. ACS Appl Mater Interfaces 9:12663–12672Google Scholar
  29. 29.
    Wang D, Wang L, Dong X, Shi Z, Jin J (2012) Chemically tailoring graphene oxides into fluorescent nanosheets for Fe3+ ion detection. Carbon 50:2147–2154Google Scholar
  30. 30.
    Atchudan R, Edison TNJI, Aseer KR, Perumal S, Karthik N, Lee YR (2018) Highly fluorescent nitrogen-doped carbon dots derived from Phyllanthus acidus utilized as a fluorescent probe for label-free selective detection of Fe3+ ions, live cell imaging and fluorescent ink. Biosens Bioelectron 99:303–311PubMedGoogle Scholar
  31. 31.
    Lu W, Qin X, Liu S, Chang G, Zhang Y, Luo Y, Asiri AM, Al-Youbi AO, Sun X (2012) Economical, green synthesis of fluorescent carbon nanoparticles and their use as probes for sensitive and selective detection of mercury(II) ions. Anal Chem 84:5351–5357PubMedGoogle Scholar
  32. 32.
    Xing S, Bing Q, Qi H, Liu J, Bai T, Li G, Shi Z, Feng S, Xu R (2017) Rational design and functionalization of a zinc metal-organic framework for highly selective detection of 2,4,6-trinitrophenol. ACS Appl Mater Interfaces 9:23828–23835PubMedGoogle Scholar
  33. 33.
    Dong Y, Wang R, Li G, Chen C, Chi Y, Chen G (2012) Polyamine-functionalized carbon quantum dots as fluorescent probes for selective and sensitive detection of copper ions. Anal Chem 84:6220–6224PubMedGoogle Scholar
  34. 34.
    Badarau A, Dennison C (2011) Copper trafficking mechanism of CXXC-containing domains: insight from the pH-dependence of their cu(I) affinities. J Am Chem Soc 133:2983–2988PubMedGoogle Scholar
  35. 35.
    Mu X, Qi L, Dong P, Qiao J, Hou J, Nie Z, Ma H (2013) Facile one-pot synthesis of l-proline-stabilized fluorescent gold nanoclusters and its application as sensing probes for serum iron. Biosens Bioelectron 49:249–255PubMedGoogle Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Chemical Science and TechnologyYunnan UniversityKunmingChina
  2. 2.Key Laboratory for Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, Yunnan Province Key Lab of Wood Adhesives and Glued Products, School of Materials Science and EngineeringSouthwest Forestry UniversityKunmingChina
  3. 3.Key Lab of Inorganic Special Functional Materials, Chongqing Municipal Education Commission, School of Chemistry and Chemical EngineeringYangtze Normal UniversityChongqingChina

Personalised recommendations