Advertisement

Rock Mechanics and Rock Engineering

, Volume 47, Issue 2, pp 467–483 | Cite as

Influence of Unloading Rate on the Strainburst Characteristics of Beishan Granite Under True-Triaxial Unloading Conditions

  • X. G. Zhao
  • J. Wang
  • M. Cai
  • C. Cheng
  • L. K. Ma
  • R. Su
  • F. Zhao
  • D. J. Li
Original Paper

Abstract

Rockburst is a sudden and violent failure of rocks and it often occurs in hard rocks in highly stressed ground. Strainburst is classified as one type of rockburst and it often occurs in rocks near or at the excavation boundary. Deep insight into the strainburst phenomenon is essential for safe underground construction at depth. In this paper, an experimental laboratory study on the strainburst behavior of Beishan granite is presented. Based on in-situ stress measurement data from the Beishan area in China, a series of tests under different unloading rates were performed to investigate the strainburst process using a true-triaxial strainburst test system which was equipped with an acoustic emission (AE) monitoring system. In addition, a high-speed video camera was used to record and visualize the initiation and ejection of rock fragments as well as the sudden dynamic failure (strainburst) of the test samples. AE characteristics associated with the cumulative energy and frequency–amplitude distributions were analyzed. Characteristics of the microscopic structure of a fragment generated from one test were observed using a scanning electron microscope. The experimental results indicate that the degree of violence during failure and the associated AE energy release in the strainburst process are dependent on the unloading rate. When the unloading rate is high, the rock is prone to strainburst. On the other hand, as the unloading rate decreases, the failure mode changes from strainburst to spalling. In addition, the cumulative AE energy is not sensitive to unloading rates greater than 0.05 MPa/s. When the unloading rate is less than 0.05 MPa/s, the cumulative AE energy shows a marked decreasing trend during rock failure.

Keywords

Rockburst Strainburst Stress path Unloading rate Acoustic emission Beishan granite 

Notes

Acknowledgments

This work has been supported by the China Atomic Energy Authority through the geological disposal program and the National Natural Science Foundation of China (Grant no. 11102061). Financial support from the Natural Sciences and Engineering Research Council (NSERC) of Canada is also appreciated. The authors thank Prof. M. C. He for his help and meaningful discussions on the strainburst tests, and Dr. S. Yong for reviewing the English of the manuscript. The authors also thank the two anonymous reviewers for their valuable comments and suggestions.

References

  1. Barton N, Lien R, Lunde J (1974) Engineering classification of rock masses for the design of tunnel support. Rock Mech Rock Eng 6:189–236CrossRefGoogle Scholar
  2. Bažant ZP, Bai SP, Gettu R (1993) Fracture of rock: effect of loading rate. Eng Fract Mech 45:393–398CrossRefGoogle Scholar
  3. Cai M (2008a) Influence of intermediate principal stress on rock fracturing and strength near excavation boundaries-insight from numerical modeling. Int J Rock Mech Min Sci 45:763–772CrossRefGoogle Scholar
  4. Cai M (2008b) Influence of stress path on tunnel excavation response—numerical tool selection and modeling strategy. Tunn Undergr Space Technol 23:618–628CrossRefGoogle Scholar
  5. Cai M, Champaigne D (2012) Influence of bolt-grout bonding on MCB conebolt performance. Int J Rock Mech Min Sci 49:165–175CrossRefGoogle Scholar
  6. Cai M, Kaiser PK, Suorineni F, Su K (2007) A study on the dynamic behaviour of the Meuse/Haute-Marne argillite. Phys Chem Earth 32:907–916CrossRefGoogle Scholar
  7. Cook NGW (1965) A note on rockbursts considered as a problem of stability. J South Afr Inst Min Metall 65:437–446Google Scholar
  8. Eberhardt E, Stead D, Stimpson B, Read RS (1998) Identifying crack initiation and propagation thresholds in brittle rock. Can Geotech J 35:222–233CrossRefGoogle Scholar
  9. Fairhurst CE, Hudson JA (1999) Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression. Int J Rock Mech Min Sci 36:279–289CrossRefGoogle Scholar
  10. Gong QM, Yin LJ, Wu SY, Zhao J, Ting Y (2012) Rock burst and slabbing failure and its influence on TBM excavation at headrace tunnels in Jinping II hydropower station. Eng Geol 124:98–108CrossRefGoogle Scholar
  11. Haimson B, Chang C (2000) A new true triaxial cell for testing mechanical properties of rock and its use to determine rock strength and deformability of Westerly granite. Int J Rock Mech Min Sci 37:285–296CrossRefGoogle Scholar
  12. He MC, Miao JL, Li DJ, Wang CG (2007) Experimental study on rockburst processes of granite specimen at great depth. Chin J Rock Mech Eng 26:865–876 (In Chinese)Google Scholar
  13. He MC, Miao JL, Feng JL (2010a) Rock burst process of limestone and its acoustic emission characteristics under true-triaxial unloading conditions. Int J Rock Mech Min Sci 47:286–298CrossRefGoogle Scholar
  14. He MC, Nie W, Han LQ, Ling LJ (2010b) Microcrack analysis of Sanya grantite fragments from rockburst tests. Min Sci Technol 20:238–243Google Scholar
  15. He MC, Nie W, Zhao ZY, Cheng C (2011) Micro- and macro-fractures of coarse granite under true-triaxial unloading conditions. Min Sci Technol 21:389–394Google Scholar
  16. He MC, Jia XN, Coli M, Livi E, Luís S (2012a) Experimental study of rockbursts in under ground quarrying of Carrara marble. Int J Rock Mech Min Sci 52:1–8CrossRefGoogle Scholar
  17. He MC, Nie W, Zhao ZY, Guo W (2012b) Experimental investigation of bedding plane orientation on the rockburst behavior of sandstone. Rock Mech Rock Eng 45:311–326CrossRefGoogle Scholar
  18. He MC, Xia HM, Jia XN, Gong WL, Zhao F, Liang KY (2012c) Studies on classification, criteria and control of rockbursts. J Rock Mech Geotech Eng 4:97–114CrossRefGoogle Scholar
  19. Hedley DGF (1992) Rockburst handbook for Ontario hardrock mines, CANMET Special Report SP92-1EGoogle Scholar
  20. Hoek E, Brown ET (1980) Underground excavation in rock. Institution of Mining and Metallurgy, LondonGoogle Scholar
  21. Hou ZS, Gong QM, Sun ZH (2011) Primary failure types and their failure mechanisms of deep buried and intact marble at Jinping II hydropower station. Chin J Rock Mech Eng 30:727–732 (in Chinese)Google Scholar
  22. ISRM (1978) Suggested methods for determining tensile strength of rock materials. Int J Rock Mech Min Sci Geomechl Abstr 15:99–103CrossRefGoogle Scholar
  23. Jackson R (1991) The effect of loading rate on the uniaxial mechanical properties of Lac du Bonnet granite, Divisional Report MRL 90-058(TR). CANMET, Energy Mines and Resources, CanadaGoogle Scholar
  24. Kaiser PK, Cai M (2012) Design of rock support system under rockburst condition. J Rock Mech Geotech Eng 4:215–227CrossRefGoogle Scholar
  25. Kaiser PK, McCreath DR, Tannant DD (1996) Canadian rockburst support handbook. CAMIRO, SudburyGoogle Scholar
  26. Kaiser PK, Vasak P, Suorineni FT, Thibodeau D (2005) New dimensions in seismic data interpretation with 3-D virtual reality visualization in burst-prone ground, Ra-SiM6. Perth, Australia, pp 33–47Google Scholar
  27. Kidybinski A (1981) Bursting liability indices of coal. Int J Rock Mech Min Sci Geomech Abstr 18:295–304CrossRefGoogle Scholar
  28. Koerner RM, McCabe WM, Lord AE Jr (1981) Overview of acoustic emission monitoring of rock structures. Rock Mech Rock Eng 14:27–35CrossRefGoogle Scholar
  29. Kumar A (1968) The effect of stress rate and temperature on the strength of basalt and granite. Geophysics 33:501–510CrossRefGoogle Scholar
  30. Lee H, Haimson BC (2011) True triaxial strength, deformability, and brittle failure of granodiorite from the San Andreas Fault Observatory at Depth. Int J Rock Mech Min Sci 48:1199–1207CrossRefGoogle Scholar
  31. Li CC (2010) A new energy absorbing bolt for rock support in high stress rock masses. Int J Rock Mech Min Sci 47:396–404CrossRefGoogle Scholar
  32. Linkov AM (1996) Rockburst and the instability of rock masses. Int J Rock Mech Min Sci Geomechl Abstr 33:727–732CrossRefGoogle Scholar
  33. Martin CD (1993) Strength of massive Lac du Bonnet granite around underground openings. University of Manitoba, ManitobaGoogle Scholar
  34. Ortlepp WD (1997) Rock fracture and rockbursts—an illustrative study. The South African Institute of Mining and Metallurgy, Johannesburg, p 98Google Scholar
  35. Ortlepp WD, Stacey TR (1994) Rockburst mechanisms in tunnels and shafts. Tunn Undergr Space Technol 9:59–65CrossRefGoogle Scholar
  36. Physical Acoustics Corporation (2007) PCI-2 based AE system user’s manual. Physical Acoustics Corporation, Princeton JunctionGoogle Scholar
  37. Salamon MDG (1974) Rock mechanics of underground excavations. In: proceedings of 3rd congress of the international society for rock mechanics national academy of sciences, Washington, DC, Denver, pp 951–1099Google Scholar
  38. Sangha CM, Dhir PK (1972) Influence of time on the strength deformation and fracture properties of a lower Devonian sandstone. Int J Rock Mech Min Sci 9:343–354CrossRefGoogle Scholar
  39. Singh SP (1986) Brittleness and the mechanical winning of coal. Min Sci Technol 3:173–180CrossRefGoogle Scholar
  40. Tang CA, Wang JM, Zhang JJ (2010) Preliminary engineering application of microseismic monitoring technique to rockburst prediction in tunneling of Jinping II project. J Rock Mech Geotech Eng 2:193–208Google Scholar
  41. Wang J-A, Park HD (2001) Comprehensive prediction of rockburst based on analysis of strain energy in rocks. Tunn Undergr Space Technol 16:49–57CrossRefGoogle Scholar
  42. Wu SY, Gong QM, Wang G, Hou ZS, She QR (2010) Experimental study of slabbing failure for deep-buried marble at Jinping II Hydropower Station and its influences on TBM excavation. Chin J Rock Mech Eng 29:1089–1095 (in Chinese)Google Scholar
  43. Yun X, Mitri HS, Yang X, Wang Y (2010) Experimental investigation into biaxial compressive strength of granite. Int J Rock Mech Min Sci 47:334–341CrossRefGoogle Scholar
  44. Zhang XP, Wong LNY, Wang SJ, Han GY (2011) Engineering properties of quartz mica schist. Eng Geol 121:135–149CrossRefGoogle Scholar
  45. Zhang CQ, Feng XT, Zhou H (2012) Estimation of in situ stress along deep tunnels buried in complex geological conditions. Int J Rock Mech Min Sci 52:139–162CrossRefGoogle Scholar
  46. Zhao XG, Cai M (2010) Influence of plastic shear strain and confinement-dependent rock dilation on rock failure and displacement near an excavation boundary. Int J Rock Mech Min Sci 47:723–738CrossRefGoogle Scholar
  47. Zhu WC, Li ZH, Zhu L, Tang CA (2010) Numerical simulation on rockburst of underground opening triggered by dynamic disturbance. Tunn Undergr Space Technol 25:587–599CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Wien 2013

Authors and Affiliations

  • X. G. Zhao
    • 1
  • J. Wang
    • 1
  • M. Cai
    • 2
  • C. Cheng
    • 3
    • 4
  • L. K. Ma
    • 1
  • R. Su
    • 1
  • F. Zhao
    • 3
    • 4
  • D. J. Li
    • 3
    • 4
  1. 1.CNNC Key Laboratory on Geological Disposal of High-level Radioactive WasteBeijing Research Institute of Uranium GeologyBeijingChina
  2. 2.Bharti School of EngineeringLaurentian UniversitySudburyCanada
  3. 3.State Key Laboratory for GeoMechanics and Deep Underground EngineeringBeijingChina
  4. 4.School of Mechanics, Architecture and Civil EngineeringChina University of Mining and TechnologyBeijingChina

Personalised recommendations