Advertisement

Multi-band piezoelectric vibration energy harvester for low-frequency applications

  • Jaya ChandwaniEmail author
  • Rohit Somkuwar
  • Raghavendra Deshmukh
Technical Paper
  • 37 Downloads

Abstract

Piezoelectric Energy Harvester (PEH) is a promising technology for harvesting energy from low frequency ambient vibrations. To generate the power from these low-frequency signals, PEH device must adapt its attributes according to respective applied input frequency range or has a wide operational frequency band. This paper presents, an experimental study of PEH providing two different modes of operation. The first working mode is a result of beams resonant frequency which is auto-tunable due to moving Centre of Gravity (CoG). The second mode of operation is mainly due to cylinders rotational and vibration motion creating impact on beams surface as well as on walls of proof mass. The device provides dual band nature for applied frequency range. The maximum power transfer is studied by varying the resistive load experimentally and FEM simulation is also carried out for the same. First working mode provides frequency band of 21–35Hz generating average power (r.m.s.) of \(6\upmu \hbox {W}\) with the optimal load of \(5\hbox {M}\Omega\). Second working mode has a frequency band of 45–60 Hz with an average harvested power (r.m.s.) of \(7.75\upmu \hbox {W}\) with \(2\hbox {M}\Omega\) optimal load. The maximum harvested output power (r.m.s.) is \(13.18\upmu \hbox {W}\). The effect of acceleration is studied for both working modes of the device. The frequency tuning range for the device is obtained as 46.96% for the provided band.

Notes

References

  1. Andò B, Baglio S, Trigona C, Dumas N, Latorre L, Nouet P (2010) Nonlinear mechanism in MEMS devices for energy harvesting applications. J Micromech Microeng 20(1–12):125020CrossRefGoogle Scholar
  2. Beeby SP, Tudor MJ, White N (2006) Energy harvesting vibration sources for microsystems applications. Measure Sci Technol 17:R175–R195CrossRefGoogle Scholar
  3. Cai Y, Manoli Y (2017) A piezoelectric energy harvester interface circuit with adaptive conjugate impedance matching, self-startup and 71 % broader bandwidth. In: ESSCIRC 2017—43rd IEEE European Solid State Circuits Conference, pp 119–122Google Scholar
  4. Challa VR, Prasad MG, Shi Y, Fisher FT (2008) A vibration energy harvesting device with bidirectional resonance frequency tunability. Smart Mater Struct 17(1–10):015035CrossRefGoogle Scholar
  5. Chen N, Wei T, Jung HJ, Lee S (2017) Quick self-start and minimum power-loss management circuit for impact-type micro wind piezoelectric energy harvesters. Sens Actuators A Phys 263:23–29CrossRefGoogle Scholar
  6. Cottone F, Vocca H, Gammaitoni L (2009) Nonlinear energy harvesting. Phys Rev Lett 102(1–4):080601CrossRefGoogle Scholar
  7. Cottone F, Basset P, Marty F, Galayko D, Gammaitoni L, Bourouina T (2014) Electrostatic generator with free micro-ball and elasticstoppers for low-frequency vibration harvesting. In: MEMS 2014, SanFrancisco, CA, USA, pp 385–388Google Scholar
  8. Friswell MI, Ali SF, Bilgen O, Adhikari S, Lees AW, Litak G (2012) Non-linear piezoelectric vibration energy harvesting from a vertical cantilever beam with tip mass. J Intell Mater Syst Struct 23(13):1505–1521CrossRefGoogle Scholar
  9. Jackson N, Stam F (2018) Sloshing liquid-metal mass for widening the bandwidth of a vibration energy harvester. Sens Actuators A Phys 284:17–21CrossRefGoogle Scholar
  10. Jackson N, Stam F, Olszewski O, Doyle H, Quinn A, Mathewson A (2016) Widening the bandwidth of vibration energy harvesters using a liquid-based non-uniform load distribution. Sens Actuators A Phys 246:170–179CrossRefGoogle Scholar
  11. Jackson N, Stam F, Olszewski OZ, Houlihan R, Mathewson A (2015) Broadening the bandwidth of piezoelectric energy harvesters using liquid filled mass. Procedia Eng 120:328–332CrossRefGoogle Scholar
  12. Jia Y, Seshia AA (2016) Power Optimization by Mass Tuning for MEMS Piezoelectric Cantilever Vibration Energy Harvesting. J Microelectromech Syst 25(1):1–10CrossRefGoogle Scholar
  13. Klah H, Najafi K (2008) Energy Scavenging From Low-Frequency Vibrations by Using Frequency Up-Conversion for Wireless Sensor Applications. IEEE Sens J 8(3):261–268CrossRefGoogle Scholar
  14. Kong N, Ha DS, Erturk A, Inman DJ (2010) Resistive impedance matching circuit for piezoelectric energy harvesting. J Intell Mater Syst Struct 21:1293–1302CrossRefGoogle Scholar
  15. Kozinsky I (2009) Study of passive self-tuning resonator for broadband power harvesting. PowerMEMS 2009, Washington DC, USA, pp 388–391Google Scholar
  16. Li H, Tian C, Deng ZD (2014) Energy harvesting from low frequency applications using piezoelectric materials. Appl Phys Rev 1(1–20):041301CrossRefGoogle Scholar
  17. Li M, Wen Y, Li P, Yang J (2011) A magnetostrictive/piezoelectric laminate transducer based vibration energy harvester with resonance frequency tunability. SENSORS, 2011 IEEE, Limerick, 2011, pp 1768–1771Google Scholar
  18. Madinei H, Khodaparast HH, Adhikari S, Friswell MI (2016) Design of MEMS piezoelectric harvesters with electrostatically adjustable resonance frequency. Mech Syst Signal Process 81:360–374CrossRefGoogle Scholar
  19. MEMSnet, Materials (2017) A MEMS Clearinghouse® and information portal for the MEMS and Nanotechnology community. https://www.memsnet.org/material/. Accessed 24 Aug 2017 (Online)
  20. Meruane V, Pichara K (2016) A broadband vibration-based energy harvester using an array of piezoelectric beams connected by springs. Shock Vib 2016:1–13CrossRefGoogle Scholar
  21. Miller LM, Pillatsch P, Halvorsen E, Wright PK, Yeatman EM, Holmes AS (2013) Experimental passive self-tuning behavior of a beam resonator with sliding proof mass. J Sound Vib 332(26):7142–7152CrossRefGoogle Scholar
  22. Roylance LM, Angell JB (1979) A batch fabricated silicon accelerometer. IEEE Trans Electron Devices ED–26(12):1911–1917CrossRefGoogle Scholar
  23. Saadon S, Sidek O (2015) Micro-electro-mechanical system (MEMS)-based piezoelectric energy harvester for ambient vibrations. Procedia Soc Behav Sci 195:2353–2362CrossRefGoogle Scholar
  24. Shahruz SM (2006) Design of mechanical band-pass filters for energy scavenging. J Sound Vib 292:987–998CrossRefGoogle Scholar
  25. Somkuwar R, Chandwani J, Deshmukh R (2018) Wideband auto-tunable vibration energy harvester using change in centre of gravity. Microsyst Technol 24:3033–3044.  https://doi.org/10.1007/s00542-018-3846-x CrossRefGoogle Scholar
  26. Wang H, Shan X, Xie T, Fang M (2011) Analyses of impedance matching for piezoelectric energy harvester with a resistive circuit. Proc 2011 Int Confer Electr Mech Eng Inform Technol EMEIT 2011 4(1):1679–1683CrossRefGoogle Scholar
  27. Wang H, Tang L (2017) Modeling and experiment of bistable two-degree-of-freedom energy harvester with magnetic coupling. Mech Syst Signal Process 86:29–39CrossRefGoogle Scholar
  28. Wu H, Tang L, Yang Y, Soh CK (2014) Development of a broadband nonlinear two-degree-of-freedom piezoelectric energy harvester. J Intell Mater Syst Struct 25(14):1875–1889CrossRefGoogle Scholar
  29. Wu X, Lin J, Kato S, Zhang K, Ren T, Liu L (2008) A frequency adjustable vibration energy harvester. In: Proc. PowerMEMS 2008+ microEMS2008, Sendai, Japan, 9–12 November 2008, pp 245–248Google Scholar
  30. Xue H, Hu Y, Wang Q (2008) Broadband piezoelectric energy harvesting devices using multiple bimorphs with different operating frequencies. IEEE Trans Ultrason Ferroelectr Freq Control 55(9):2104–2108CrossRefGoogle Scholar
  31. Zhang L, Zheng G, Li J (2012) Active piezoelectric energy harvester based on impedance matching. In: Proceeding of the IEEE International Conference on Automation and Logistics Zhengzhou, China, pp 131–135Google Scholar
  32. Zhu D, Tudor MJ, Beeby SP (2010) Strategies for increasing the operating frequency range of vibration energy harvesters: a review. Measure Sci Technol 21(1–29):022001CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Centre for VLSI and Nanotechnology, VNITNagpurIndia

Personalised recommendations