Advertisement

Investigations on the flow behaviour in microfluidic device due to surface roughness: a computational fluid dynamics simulation

  • Prabhat RanjanEmail author
Technical Paper
  • 33 Downloads

Abstract

In the field of micro-fluidics device, as the cross section of micro-channel comes down to the scale of few tens of micro-meters, surface area to volume ratio increases significantly, and due to this, surface dependent phenomenon dominates during flow of the fluid. This surface dependent phenomenon is mainly governed by surface roughness as an important parameter which directly influences on flow and results in the loss of pressure head due to the building of localised pressure as well as eddy flow. To understand this mechanism, a computational fluid dynamics (CFD) simulation is carried out. In the present CFD simulation, fluid and solid interactions are modelled in two different types. The first is modelled as pure slip between them so that the effect of roughness can be investigated as a main source of friction factor. The second model consists the effect of the pure adhesion by maintain zero relative velocity on the surface of micro-channel. Behaviour of fluid flow and increase in pressure-drop are observed differently in the both types of model. It is observed that the rise in pressure-drop occurs exponentially as size of a channel reduces from 300 to 100 µm. This phenomenon reveals the science of the size effect on micro-channels. The surface roughness of micro-channel is simulated and it is also observed that the surface finish up to few tens of nanometers does not affect the fluid flow. However, the flow resistance increases as the surface roughness increases up to few hundreds of nanometers, and the pressure-drops along the channel length. In the present case, an elevated temperature of fluid mitigates the effect of surface roughness up to some extent for the efficient flow of fluid in a micro-fluidic device. Hence, micro-fluidic device with nano-finished micro-channel and elevated temperature of fluid is recommended for economic and efficient utilisation of the device.

Notes

References

  1. Bahrami M, Yovanovich MM, Culham JR (2005) Pressure drop of fully developed, laminar flow in rough microtubes. J Fluids Eng 128(3):632–637.  https://doi.org/10.1115/1.2175171 CrossRefGoogle Scholar
  2. Bhavsar SN, Aravindan S, Venkateswara Rao P (2015) Investigating material removal rate and surface roughness using multi-objective optimization for focused ion beam (FIB) micro-milling of cemented carbide. Precis Eng 40:131–138.  https://doi.org/10.1016/j.precisioneng.2014.10.014 CrossRefGoogle Scholar
  3. Dai B, Li M, Ma Y (2014) Effect of surface roughness on liquid friction and transition characteristics in micro- and mini-channels. Appl Therm Eng 67(1):283–293.  https://doi.org/10.1016/j.applthermaleng.2014.03.028 CrossRefGoogle Scholar
  4. Davies J, Maynes D, Webb BW, Woolford B (2006) Laminar flow in a microchannel with superhydrophobic walls exhibiting transverse ribs. Phys Fluids 18(8):87–110.  https://doi.org/10.1063/1.2336453 CrossRefGoogle Scholar
  5. Komvopoulos K (1996) Surface engineering and microtribology for microelectromechanical systems. Wear 200(1):305–327.  https://doi.org/10.1016/S0043-1648(96)07328-0 CrossRefGoogle Scholar
  6. Mohiuddin Mala G, Li D (1999) Flow characteristics of water in microtubes. Int J Heat Fluid Flow 20(2):142–148.  https://doi.org/10.1016/S0142-727X(98)10043-7 CrossRefGoogle Scholar
  7. Palasantzas G, Widom A (1998) Roughness effects on the sliding frictional force of submonolayer liquid films on solid substrates. Phys Rev B 57(8):4764–4767.  https://doi.org/10.1103/physrevb.57.4764 CrossRefGoogle Scholar
  8. Prakash S, Kumar S (2014) Fabrication of microchannels: a review. Proc Inst Mech Eng Part B J Eng Manuf 229(8):1273–1288.  https://doi.org/10.1177/0954405414535581 CrossRefGoogle Scholar
  9. Prentner S, Allen DM, Larcombe L, Marson S, Jenkins K, Saumer M (2009) Effects of channel surface finish on blood flow in microfluidic devices. In: Symposium on design, test, integration and packaging of MEMS/MOEMS, pp 51–54Google Scholar
  10. Prentner S, Allen DM, Larcombe L, Marson S, Jenkins K, Saumer M (2010) Effects of channel surface finish on blood flow in microfluidic devices. Microsyst Technol 16:1091–1096.  https://doi.org/10.1007/s00542-009-1004-1 CrossRefGoogle Scholar
  11. Si Salah SA, Filali EG, Djellouli S (2017) Numerical investigation of Reynolds number and scaling effects in micro-channels flows. J Hydrodyn Ser B 29(4):647–658.  https://doi.org/10.1016/S1001-6058(16)60777-1 CrossRefGoogle Scholar
  12. Taylor JB, Carrano AL, Kandlikar SG (2006) Characterization of the effect of surface roughness and texture on fluid flow—past, present, and future☆☆A preliminary version of this paper was presented at ICMM05: third international conference on microchannels and minichannels, held at University of Toronto, June 13–15, 2005, Organized by Kandlikar SG, Kawaji M, CD-ROM proceedings, ISBN: 0-7918-3758-0, ASME, New York. Int J Therm Sci 45(10):962–968.  https://doi.org/10.1016/j.ijthermalsci.2006.01.004
  13. Tosello G, Marinello F, Hansen HN (2012) Characterisation and analysis of microchannels and submicrometre surface roughness of injection moulded microfluidic systems using optical metrology. Plast Rubber Compos 41(1):29–39.  https://doi.org/10.1179/0743289811Y.0000000017 CrossRefGoogle Scholar
  14. Tsai K-M, Wang P-J (2001) Predictions on surface finish in electrical discharge machining based upon neural network models. Int J Mach Tools Manuf 41(10):1385–1403.  https://doi.org/10.1016/S0890-6955(01)00028-1 CrossRefGoogle Scholar
  15. Tullius JF, Vajtai R, Bayazitoglu Y (2011) A review of cooling in microchannels. Heat Transf Eng 32(7–8):527–541.  https://doi.org/10.1080/01457632.2010.506390 CrossRefGoogle Scholar
  16. Yuan X, Tao Z, Li H, Tian Y (2016) Experimental investigation of surface roughness effects on flow behavior and heat transfer characteristics for circular microchannels. Chin J Aeronaut 29(6):1575–1581.  https://doi.org/10.1016/j.cja.2016.10.006 CrossRefGoogle Scholar
  17. Yue J (2018) Multiphase flow processing in microreactors combined with heterogeneous catalysis for efficient and sustainable chemical synthesis. Catal Today 308:3–19.  https://doi.org/10.1016/j.cattod.2017.09.041 CrossRefGoogle Scholar
  18. Zhang Y (2018) On study of application of micro-reactor in chemistry and chemical field. IOP Conf Ser Earth Environ Sci 113(1):12003Google Scholar
  19. Zhu P-FH, Yao Z-H, He F, Zhu K-Q (2006) Experimental investigation of water flow in smooth and rough silicon microchannels. J Micromech Microeng 16(7):1397CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Precision Engineering DivisionBARCMumbaiIndia

Personalised recommendations