A near zero skew actuation mechanism for hard disk drives
- 174 Downloads
- 1 Citations
Abstract
The rotation of the voice coil motor (VCM) actuator in a hard disk drive results in a skewed actuation. The difference in skew angles, between the inner diameter (ID) and the outer diameter (OD) can be as large as 25°–35° in conventional 3.5″ and 2.5″ hard disk drives. A large skew angle causes an increase in side reading and writing, and thus reduces the achievable recording density. A large skewed actuation also degrades the head flying performance and complicates the servo loop. In this paper, a four link actuation mechanism which can be designed to achieve near zero skew actuation in hard disk drives is presented. The profiles of the arm, suspension, and links are optimized such that the skew angle is close to zero when the VCM actuator rotates from the ID to the OD. Finite element analysis is employed to study the resonance frequencies, frequency responses and shock performance of the mechanism. The study shows that the four link mechanism does not degrade the resonance performance along the tracking direction and the shock performance compared to a conventional actuator. Experimental motion analysis shows that actuation response speed of the mechanism is 50 % slower than that of a conventional actuator. The recording density gain due to a substantial zero skew actuation is 12–18 % compared to conventional actuations.
Keywords
Hard Disk Drive Link Mechanism Areal Density Actuation Mechanism Voice Coil MotorReferences
- Chainer TJ, Sohn WJ, Sri-Jayantha M, Brown DH, Apuzzo NC (1991) A flexural in-line actuator for magnetic recording disk drives. IEEE Trans Magn 27(6):5295–5297CrossRefGoogle Scholar
- Guo GX, Hao Q, Low TS (2001) A dual-stage control design for high track per inch hard disk drives. IEEE Trans Magn 37(2):860–865CrossRefGoogle Scholar
- He ZM, Ong EH, Guo GX (2002) Optimization of a magnetic disk drive actuator with small skew actuation. J Appl Phys AIP 91(10):8709–8711CrossRefGoogle Scholar
- He ZM, Loh HT, Ong EH (2008) Reliability evaluation of piezoelectric micro-actuators with application in hard disk drives. IEEE Trans Magn 44(11):3722–3724CrossRefGoogle Scholar
- Jayson EM, Murphy J, Smith PW, Talke FE (2003) Effects of air bearing stiffness on a hard disk drive subject to shock and vibration. ASME J Tribol 125(2):343–349CrossRefGoogle Scholar
- Lairson BM, Lambert SE, Nguy H, Nguyen L, Wallash A, Huang T, Adler J (2001) Disk drive integration issues for perpendicular recording. IEEE Trans Magn 37(1):1223–1227 No 4CrossRefGoogle Scholar
- Mou JQ, Zhang QD, Sundaravadivelu K, Liu NY, Ong EH (2010) Reduction of flow induced vibration in hard disk drive. In: Proceedings of ASME IMECE2010, IMECE2010-37649, November 12–18, Vancouver CanadaGoogle Scholar
- Ong EH, He ZM, Chen RF, Qian H, Guo GX (2000) A low-turbulence-high-bandwidth actuator for 3.5. Hard Disk Drives IEEE Trans Magn 36:2235–2237CrossRefGoogle Scholar
- Sarajlic E, Yamahata C, Cordero M, Fujita H (2010) Three-phase electrostatic rotary stepper motor for skew angle compensation. In: Asia Pacific Magnetic Recording Conference (APMRC), 2010 Digest, AB-1, November 10–12, SingaporeGoogle Scholar
- Seagate Technology LLC (2006) Hard drives actuator with reduced skew variation, US patent: 7,072,147 B2Google Scholar
- Zeng QH, Bogy DB (2002) Numerical simulation of shock response of disk-suspension-slider air bearing systems in hard disk drives. Microsyst Technol 8:289–296CrossRefGoogle Scholar
- Zhou H et al (2004) Effects of head pole aspect ratio and skew angle on areal density in perpendicular recording. IEEE Trans Magn 40(4):2395–2397CrossRefGoogle Scholar