An integrated pan-European research infrastructure for validating smart grid systems
- 713 Downloads
A driving force for the realization of a sustainable energy supply in Europe is the integration of distributed, renewable energy resources. Due to their dynamic and stochastic generation behaviour, utilities and network operators are confronted with a more complex operation of the underlying distribution grids. Additionally, due to the higher flexibility on the consumer side through partly controllable loads, ongoing changes of regulatory rules, technology developments, and the liberalization of energy markets, the system’s operation needs adaptation. Sophisticated design approaches together with proper operational concepts and intelligent automation provide the basis to turn the existing power system into an intelligent entity, a so-called smart grid. While reaping the benefits that come along with those intelligent behaviours, it is expected that the system-level testing will play a significantly larger role in the development of future solutions and technologies. Proper validation approaches, concepts, and corresponding tools are partly missing until now. This paper addresses these issues by discussing the progress in the integrated Pan-European research infrastructure project ERIGrid where proper validation methods and tools are currently being developed for validating smart grid systems and solutions.
Keywordssmart grids simulation hardware-in-the-loop testing research infrastructure education training
1.1 Smart grids—towards a higher digitalization of distribution networks
Whereas transmission systems are already well equipped with sophisticated measurement equipment and are centrally operated, the integration of renewable generators occurs mainly at the level of distribution networks, which used to be operated in a passive way until now. With smaller units at this grid level, the numbers of sub-systems and devices to be monitored and controlled steadily increases. While the application of modern scalable Information and Communication Technology (ICT) facilitates this integration, it also creates further coupling of engineering domains where little mutual interdependencies existed before. Challenged by this development, new methodologies and practices must be developed. Viewing the electric energy infrastructure in its entirety as a cyber-physical, critical infrastructure, such new methodologies and practices will have to ensure that the classical high-reliability, real-time operation, and regulatory requirements can be met also in the future. [1, 2, 3, 4, 5].
1.2 Needs for integrated and holistic power systems testing
The observed increase of complexity thus manifests in increased coupling across domains, such as electricity, automation/control, and ICT, but also in scale and heterogeneity. The effects of this are not trivial to anticipate, nor to summarize: operational aspects become a concern, as failures may propagate across increasingly interdependent automation systems; energy management and coordination may become more challenging. Another challenge with complexity is the ability to conceive, design, and develop critical infrastructure systems that depend on such cross-disciplinary competences.
Before deployment in an operational environment, smart grid solutions and products have to be validated and tested. Industry and researchers have recognized this challenge and according to the 2015 annual report of the Joint Research Center (JRC) of the European Commission (EC), there were 459 projects and demonstrative smart grid platforms in Europe with an overall investment of around €3.15 billion, in the period from 2002 to 2014 . The growing number of smart grid projects around the world has led to a significant portfolio of demonstrators and advanced ICT networking features.
Testing is an integral part of the development process. The status quo for power systems testing is to focus on a particular Device-under-Test, meanwhile simplifying the behaviour of other components to electrical equivalents. This traditional decoupling raises a question of the global behaviours of the integrated system. A combination of different technologies across domains requires that communication among specialists is established and founded on the interconnection of different disciplines during the development process. The heterogeneity of smart grid domains and technologies, notably the interactions between the various technologies, conflicts with the traditional approach: test labs often specialise in a certain domain and can hence only test components for a particular sub-system. So far, testing approaches which combine ICT/automation with electricity domains have had a main focus on individual components . However, in order to support the different stages of the overall development process for smart grid solutions, tests are needed to evaluate the integration on a system level, addressing all relevant test domains [8, 9]. Proposed alternative testing approaches include virtual (simulation) or semi-virtual (hardware-in-the-loop) experiments that cover multiple domains. For these new approaches, questions arise as to whether the test results can be considered valid enough to draw firm conclusions for a real-world deployment of the tested systems.
This paper addresses the above outlined shortcomings on system-level testing by discussing the progress of the integrated pan-European Research Infrastructure (RI) project ERIGrid, where proper validation methods and tools are currently being developed for validating smart grid systems and technologies. Whereas the overall ERIGrid approach and corresponding research directions have already been outlined in a previous paper , this work mainly focuses on the achievements and activities related to the definition of a system-level validation process as well as on simulation and lab-based assessment methods. Additionally, the concept of an online coupling of various labs is discussed. A further focus of ERIGrid is on the development of proper training and education material which improves the multi-disciplinary understanding of researchers and engineers which is highly important in the area of smart grids.
The rest of this paper is organized as follows: Sect. 2 provides a brief overview of the overall ERIGrid approach whereas the status of the research and development progress is discussed in Sect. 3. Educational and training aspects are covered in Sect. 4. This paper is concluded with the main findings and an outlook about the planned future work in Sect. 5.
2 The ERIGrid integrated research infrastructure
In order to overcome the lack in power system validation and testing as outlined above, eighteen research institutions from eleven European countries are joining their forces and cooperating within the European-funded RI project called “ERIGrid1”  which is introduced below.
2.1 Main goals
Creation of a single point of reference promoting research, technology development, and innovation on all aspects of smart grid systems validation,
Development of a coordinated and integrated approach using the partners’ expertise and infrastructures more effectively, adding value to research projects, and promoting European leadership in smart grid systems,
Facilitating a wider sharing of knowledge, tools, and techniques across fields and between academia and industry across Europe, and
Accelerating pre-normative research and promoting the rapid transfer of research results into industrial-related standards to support future smart grids development, validation and roll out.
2.2 Concept and approach
Development of a formalized, holistic validation procedure for testing smart grid systems and corresponding configurations,
Improvement of simulation and lab-based testing methods supporting the validation activities, and
The provision of a corresponding and integrated pan-European RI based on the partner’s laboratories.
The holistic testing methodology should facilitate conducting tests and experiments representative of integrated smart grid systems by testing and experimentation across distributed RIs, which might not necessarily be functionally interconnected.
3 Research directions and technology development
In the following sections the ERIGrid research directions and the status of the corresponding technology development are discussed.
3.1 Holistic testing of smart grid configurations
Smart grid solutions have become complex and multidisciplinary. With the further integration of automation, control, ICT and other energy systems new test processes must be defined. A method for framing a holistic approach is being developed in ERIGrid in order to capture this complexity, which aims at enabling the testing of new solutions within their relevant operational context. A holistic testing method ensures a clear vocabulary for smart grid testing across engineering disciplines and a common understanding of how to describe a testing approach that addresses a system-relevant perspective.
Requirements associated with multiple domains are viewed as part of single test cases,
Systematic and integrated testing strategy for systems, components and their integration,
The hybridization of methods applicable to distinct formal representation frameworks (i.e. ICT, discrete and logic oriented testing, vs. physical continuous models and uncertainty),
The formal integration of several independent tests into a common framework, and
Technical integration of different means of testing, such as real-time simulation.
The core elements of this testing approach cover the description of test cases, the test as well as the experiment specification. The (holistic) test case, which describes the test objective in context of a specific smart grid solution, is refined into test specifications that can be split among different RIs, yet still maintaining the overall test problem. Finally, these RIs must then transform these test specifications into experiment specifications that can be carried out at the individual RI. The practical use of the approach is supported by concise definitions, template forms with guiding text, graphical templates as well as exemplary applications.
Addressing the requirements of a testing process, the proposed methodology attempts to strike a balance between formal definitions, existing concepts within standards, and the practical use and understanding of tests. The test case, test- and experiment specifications include the notions of test criteria and parameters, which support the incremental definition of test factors to facilitate the application of the analytical and statistical methods for experiment design and evaluation. Given the test objective, these methods will be used to analytically compose the appropriate test design as well as to enable uncertainty quantification. This will facilitate the exchange and integration of partial test results across RIs and experiments.
ERIGrid’s approach on holistic testing may be considered as a vision of a pre-standardised process and methodology implementing the testing of a system that includes multi-domain aspects (e.g., by addressing power, automation/control, and ICT). This vision can be extended to the mutualisation of resources of multiple partners to conduct parallel, sequential and integrated tests according to formalized RI profiles and mapping procedures.
3.2 Improved assessment methods
As outlined in the introduction, future power systems will contain a heterogeneous agglomeration of different multi-domain technologies (e.g., power, automation, control, and ICT), which need corresponding assessment methods and tools. The focus of the research activities in ERIGrid are on the further development of simulation and laboratory-based approaches, which allow also a flexible coupling of them in a Hardware-in-the-Loop (HIL) manner [9, 10, 12].
3.2.1 Simulation-based tools
As discussed in  simulation methods and corresponding tool frameworks are highly important in the engineering and validation of smart grid systems. The focus in ERIGrid is on the further development of proper simulation approaches, especially on the coupling of various tools from different domains (i.e., power system, automation and control, ICT). However, the coupling of different simulation packages leads to a number of serious challenges: different solvers have to interoperate, various numerical phenomena are not well understood, and fundamentally different models must exchange dynamic state information. An emerging industry standard that touches some of these aspects is the Functional Mockup Interface (FMI) . It allows for coupling simulation packages and to encapsulate models. The individual framework components can be tested individually, due to its modular architecture and clean interfaces. However, FMI usually needs a kind of simulation manager for coordinating the different simulation environments. The approach in ERIGrid is to use the open source framework mosaik which provides the corresponding functions and services.
A further focus is on the development of proper component libraries. Existing simulators are usually not capable to cover and describe modern smart grid technology. Certain extensions and modifications are necessary in order to cover power system, automation, and ICT issues. All the developed simulation models must comply with the philosophy of FMI for model exchange in order to fit into the overarching simulation framework.
3.2.2 Laboratory-based tools
3.3 Integrated pan-European research infrastructure
Smart grid labs are complex infrastructures. They have some unique properties, which distinguish them from other technical installations of comparable complexity. This includes the often-experimental nature of the installation, changing user groups, and evolving configurations. This complicates collaboration between laboratories and presents unique training challenges to resident and visiting users alike. Unlike electrical power grids, whose construction principles have been developed over the course of more than a century and which have been extensively standardised, there is no standard for what constitutes a smart grid laboratory. Consequently, the use of information and communication technology systems, the underlying architectures and the availability of interfaces is subject to large variations between facilities. Therefore, a further research and development activity in ERIGird is the removal of technical and user-related obstacles through standardisation, harmonisation, and documentation.
ERIGrid tackles these issues by introducing a harmonized and detailed description of the available RI capabilities and a coherent and technology-agnostic description of RI control interfaces, supporting the coordination of control software deployment across RIs. Furthermore, if several RIs need to be used in order to realize a testing scenario (as foreseen in the above introduced procedure) a live-coupling of corresponding laboratory components and devices might be required. This leads to the approach called “Joint Research Facility for Smart Energy Networks with Distributed Energy Resources (JaNDER)” . Its main purpose is to integrate all RIs of all ERIGrid partners with secure and interoperable online signal exchange and high-level service provision (e.g., state estimation), providing more opportunities for joint validation of smart grid systems. To facilitate the validation for all partners using joint laboratories, an access from a device interface up to a user interface is needed. The safety and security topics are equally important as the flexible data exchange.
The cloud database maintains all shared measurements and control points of all partners’ labs forming therefore a virtual, integrated pan-European smart grid RI, which can be used for more complex validation and testing scenarios of smart grid solutions, technologies, and products.
4 Interdisciplinary education of researchers and engineers
The complexity of power and energy systems is rising with the integration of renewable and distributed generation, advanced automation and control approaches as well as the usage of sophisticated communication concepts. Therefore, a broad understanding of these topics by researchers and engineers is necessary to develop and validate proper smart grid technologies and solutions. Usually, the classic electrical power engineering education does not sufficiently cover smart grid topics, posing challenges to young researchers and students and also to the industry. Appropriate education and training on modern topics is essential to understand and tackle the challenges and propose new methods, concepts, and corresponding tools as described above .
Physical behaviour of smart grid systems and its connected sub-systems and components,
Automation and control systems,
Communication networks, and
Advanced control, optimization, and data analytics.
An interesting example for such a training activity emerged out of the further improvement of HIL-based methods. HIL simulations have been used to show how advanced functions of smart inverters can be used to contribute to power quality improvements. Therefore, in a real-time simulation system the power grid is being modelled and simulated and connected with a real residential PV inverter system. Besides showing the normal operation of the inverter-based system, also emergency situations can be quite easily emulated and correct contingency actions can be trained without any risk of damage in case of a false reaction. Further details about the corresponding curricula are described in .
The expected large-scale roll out of smart grid products and solutions during the next few years requires a multi-disciplinary understanding of several domains. The validation and testing of such complex solutions gets more important as in the past and there is a clear shift from component-level to system-level testing. An integrated, cyber-physical systems-based, multi-domain approach for a holistic testing of smart grid solutions is currently still missing which is addressed by the ERIGrid approach. Four main research priorities have been identified in this project to tackle the shortcomings in today’s validation and testing of power systems and corresponding components. The research focus is put onto the development of a holistic validation procedure and the improvement of simulation-based methods, hardware-in-the-loop approaches, and lab-based testing, which can be combined in a flexible manner. The integration and online connection of the partners’ labs is also a challenging research and development task in ERIGrid. All these activities need to be supported by the training of researchers and power system professionals. Proper curricula and education material is currently in development.
Structured approach for defining a holistic description of validation and testing needs together with corresponding experiment descriptions,
Improved co-simulation based approach with corresponding FMI-based model libraries addressing the multi-domain and cyber-physical character of smart grid configurations,
Improved HIL-based concepts analysing system-integration aspects of smart grid components,
Possibility to couple co-simulation with lab experiments addressing system-integration aspects,
Evaluation of different ICT and automation architectures, control concepts,
Support for rapid-prototyping of components and analysing their behaviour in power systems, and
Support for evaluating different smart grid system configurations.
Future work will mainly cover further improvement of the validation procedure and applying it to selected smart grid scenarios using the improved assessment methods as well as the online-coupling of labs. A large effort will be also put on the education and training of researchers and engineers as well as the provision of the improved RI capabilities and services to external user groups.
European Research Infrastructure supporting Smart Grid Systems Technology Development, Validation and Roll Out.
This work is supported by the European Community’s Horizon 2020 Program (H2020/2014-2020) under project “ERIGrid” (Grant Agreement No. 654113). Further information is available at the corresponding website www.erigrid.eu.
- 1.International Energy Agency (IEA) (2011): Technology roadmap: smart grids. Paris, France. Google Scholar
- 2.European Commission (2016): EU reference scenario 2016. Energy, transport and GHG emissions trends to 2050. Brussels, Belgium. Google Scholar
- 6.Catalin, F. C., Miicea, A., Julija, V., Anna, M., et al. (2014): Smart grid projects outlook 2014. JRC science and policy reports. Brussels: European Commission–Joint Research Centre (JRC). Google Scholar
- 8.International Smart Grid Action Network (ISGAN), International Energy Agency (IEA) (2013): Smart Grid International Research Facility Network (SIRFN). Paris, France. Google Scholar
- 9.Strasser, T., Andrén, F., Lauss, G., Bründlinger, R., et al. (2016): Towards holistic power distribution system validation and testing—an overview and discussion of different possibilities. In CIGRE session 46, Paris, France, Aug. 21–26. Google Scholar
- 10.Strasser, T. I., Moyo, C., Bründlinger, R., Lehnhoff, S., et al. (2017): An integrated research infrastructure for validating cyber-physical energy systems. In International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS, Lyon, France, Aug. 28–30. Google Scholar
- 11.Blank, M., Lehnhoff, S., Heussen, K., Bondy, D. E. M., et al. (2016): Towards a foundation for holistic power system validation and testing. In 2016 IEEE 21st international conference on emerging technologies and factory automation, ETFA, Berlin, Germany, Sept. 6–9. Google Scholar
- 12.Steinbrink, C., Lehnhoff, S., Rohjans, S., Strasser, T. I., et al. (2017): Simulation-based validation of smart grids–status quo and future research trends. In International conference on industrial applications of holonic and multi-agent systems, HoloMAS, Lyon, France, Aug. 28–30, 2017. Google Scholar
- 13.Otte, M., Pala, D., Sandroni, C., Rohjans, S., Strasser, T. (2018): Multi-laboratory cooperation for validating microgrid and smart distribution system approaches. In CIRED workshop 2018, Ljubljana, Slovenia, June 7–8. Google Scholar
- 14.Kotsampopoulos, P., Hatziargyriou, N., Strasser, T. I., Moyo, C., et al. (2017): Validating intelligent power and energy systems–a discussion of educational needs. In International conference on industrial applications of holonic and multi-agent systems HoloMAS, Lyon, France, Aug. 28–30. Google Scholar
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.