Advanced use of PLCopen motion control library for autonomous servo drives in IEC 61499 based automation and control systems

  • C. Sünder
  • A. Zoitl
  • F. Mehofer
  • B. Favre-Bulle
Originalarbeit

This article presents the use of autonomous components for motion control applications in distributed automation systems. Current realizations based on IEC 61131 lack of a seamless integration into the resulting system consisting of functional units. The basis for the new concept is the PLCopen Motion Control Library which is applied to the reference model of the new standard IEC 61499.

Keywords

Distributed automation systems Autonomous components Motion control PLCopen motion control library IEC 61499 

Erweiterter Einsatz der PLCopen Motion Control-Bibliothek für autonome Servoachsen in Automatisierungssystemen basierend auf IEC 61499

In diesem Beitrag wird die Verwendung von autonomen Komponenten für die Steuerung von Bewegungen in verteilten Automatisierungssystemen behandelt. Aktuellen Realisierungen, die auf dem Standard IEC 61131 beruhen, fehlt hier vor allem die durchgängige Integration in das dabei entstehende System aus funktionalen Einheiten. Die Basis für das neue Konzept bildet die Motion Control Library der PLCopen, die auf das Referenzmodell der IEC 61499 angewendet wird.

Schlüsselwörter

Verteilte Automatisierungssysteme Autonome Komponenten Bewegungssteuerung PLCopen motion control library IEC 61499 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Baumüller (2005): b maXX. Product folder. Baumüller Nürnberg GmbH, Nürnberg, 2.192.en.11/05.20M, www.baumueller.com/.
  2. Dutzler, C. (2003): A modular control architecture for industrial automation systems. Vienna University of Technology, PhD thesis, Vienna, Austria.Google Scholar
  3. International Electrotechnical Commission (2005): IEC 61499-1: Function blocks – part 1: architecture, International Standard. First Edition, Geneva, Switzerland.Google Scholar
  4. John, K.-H., Tiegelkamp, M. (1995): IEC 61131-3: Programming industrial automation systems – concepts and programming languages, requirements for programming systems, aids to decision-making tools. Berlin, Heidelberg, New York: Springer Verlag.Google Scholar
  5. Mehofer, F. (2005): Cooperating autonomous linear axes in distributed automation systems. Vienna University of Technology, Master thesis, Vienna, Austria.Google Scholar
  6. PLCopen Technical Commitee 2 (2005): Function blocks for motion control version 1.1. PLCopen, Zaltbommel, The Netherlands, www.plcopen.org/.
  7. Sünder, C. (2004): Integration of motion control in distributed automation systems according to IEC 61499. Vienna University of Technology, Master thesis, Vienna, Austria.Google Scholar
  8. Sünder, C., Zoitl, A., Strasser, T., Favre-Bulle, B. (2005): Intuitive control engineering for mechatronic components in distributed automation systems according to the reference model of IEC 61499. Proc. of the 3rd Int. Conf. on Industrial Informatics (INDIN 2005), IEEE: 50–55.Google Scholar
  9. Vyatkin, V. (2003): Intelligent mechatronic components: control system engineering using an open distributed architecture. Proc. of the IEEE Conf. on Emerging Technologies in Factory Automation (ETFA'03), IEEE: 277–284.Google Scholar

Copyright information

© Springer-Verlag 2006

Authors and Affiliations

  • C. Sünder
    • 1
  • A. Zoitl
    • 1
  • F. Mehofer
    • 1
  • B. Favre-Bulle
    • 1
  1. 1.Automation and Control Institute (ACIN)Vienna University of TechnologyViennaAustria

Personalised recommendations