On Easiest Functions for Mutation Operators in BioInspired Optimisation
Abstract
Understanding which function classes are easy and which are hard for a given algorithm is a fundamental question for the analysis and design of bioinspired search heuristics. A natural starting point is to consider the easiest and hardest functions for an algorithm. For the (1+1) EA using standard bit mutation (SBM) it is well known that OneMax is an easiest function with unique optimum while Trap is a hardest. In this paper we extend the analysis of easiest function classes to the contiguous somatic hypermutation (CHM) operator used in artificial immune systems. We define a function MinBlocks and prove that it is an easiest function for the (1+1) EA using CHM, presenting both a runtime and a fixed budget analysis. Since MinBlocks is, up to a factor of 2, a hardest function for standard bit mutations, we consider the effects of combining both operators into a hybrid algorithm. We rigorously prove that by combining the advantages of k operators, several hybrid algorithmic schemes have optimal asymptotic performance on the easiest functions for each individual operator. In particular, the hybrid algorithms using CHM and SBM have optimal asymptotic performance on both OneMax and MinBlocks. We then investigate easiest functions for hybrid schemes and show that an easiest function for a hybrid algorithm is not just a trivial weighted combination of the respective easiest functions for each operator.
Keywords
Running time analysis Theory Hybridisation Evolutionary algorithms Artificial immune systems1 Introduction
Over the past years many bioinspired search heuristics such as evolutionary algorithms, swarm intelligence algorithms, or artificial immune systems, have been developed and successfully applied to various optimisation problems. These heuristics have different strengths and weaknesses in coping with different fitness landscapes. Determining which heuristic is the best choice for a given problem is a fundamental and important question.
We use rigorous theoretical analyses to contribute to a better understanding of bioinspired algorithms. A natural step is to investigate which functions are easy and which are hard for a given algorithm as this yields fundamental insights into their working principles, particularly with respect to their strengths and weaknesses.
Knowing how well an algorithm performs on its easiest and hardest functions, with regards to the expected optimisation time, provides general insights, as the expected optimisation time of every function will be no less than that of an easiest function and no more than that of a hardest function. With respect to applications, such research may also provide guidelines for the design of benchmarks for experimental studies [10].
For a simple elitist (1+1) evolutionary algorithm (EA) using only standard bit mutations (SBM) Doerr, Johannsen, and Winzen showed that OneMax, a function simply counting the number of ones in a bit string, is the easiest problem among all functions with a single global optimum [8]. This statement generalises to the class of all evolutionary algorithms that only use standard bit mutation for variation [33] as well as higher mutation rates and stochastic dominance [37]. On the other hand, He et al. [10] showed that the highly deceptive function Trap is the hardest function for the (1+1) EA.
In this work we consider typical mutation operators in artificial immune systems where no such results are available. Mutation operators in artificial immune systems [6] usually come with much larger mutation rates than mutation operators in evolutionary algorithms. One such example is the somatic contiguous hypermutation (CHM) operator from the Bcell algorithm (BCA) [23], where large contiguous blocks of a bit string are flipped simultaneously. Previous theoretical work on comparing SBM and CHM has contributed to the understanding of their benefits and drawbacks in the context of its runtime on different problems [14, 17, 18], the expected solution quality after a predefined number of steps [21], and in dynamic environments [22]. It is easy to see that hardest functions for CHM with respect to expected optimisation times are those where the algorithm gets trapped with positive probability such that the optimisation time is not finite, e. g., if there exists a second best search point for which all direct mutations to the optimum involve noncontiguous bits [17]. However, it is an open problem and the next step forward to determine what kind of functions are easiest for this type of mutation operator.
The BCA uses standard bit mutations alongside CHM and thus can be considered as a hybrid algorithm combining two mutation operators. More specifically, it uses a population of search points and creates \(\lambda \) clones for each of them. It then applies standard bit mutation to a randomly selected clone for each parent search point and subsequently applies CHM to all clones. The interplay between these two operators has been investigated for the vertex cover problem [14].
Hybridisations such as hyperheuristics [30] and memetic algorithms [27] have become very popular over recent years. But despite their practical success their theoretical analysis is still in its infancy, noteworthy examples being the work in [1, 24, 32, 34]. However, nothing is known about easiest or hardest functions for such algorithms.
The goals of this paper are twofold. We first want to understand what functions are easy for CHM and investigate the performance of CHM and SBM on these functions. Afterwards we consider hybridisations of SBM and CHM and easiest functions for such algorithms. We first use the method by He et al. [10], explained in Sect. 3, to derive an easiest function for CHM which we call MinBlocks. In Sect. 4 we present an analysis of the optimisation time as well as a fixed budget analysis for CHM on MinBlocks. We then show that SBM alone is not able to optimise the constructed function and that a hybridisation of SBM and CHM can have significant advantages (Sect. 5.1). Finally, we investigate properties of easiest functions for such hybrid algorithms (Sect. 5.3).
This journal paper extends a preliminary conference paper [4] in several ways. Firstly, in Sect. 3 it is discussed how the framework for determining easiest and hardest functions is not restricted to (1+1)style algorithms, but is general enough to apply for a much larger class of algorithms including (1+\(\lambda \)) EAs [13] and the recently popular (1+(\(\lambda ,\lambda \))) GA using mutation and crossover [7]. Secondly, the analysis of the advantages of hybridisation in Sect. 5.1 has been considerably extended. Rather than just giving an example of a hybrid algorithm using one out of two operators at each step with constant probability, the analysis has been generalised to allow different hybridisation schemes and an arbitrary number k of operators. Finally, in Sect. 5.2 an experimental analysis is presented to shed light on the performance of the algorithms for fitness functions that depend both on the number of ones (i.e., OneMax) and the number of blocks (MinBlocks) in the bit string.
2 Preliminaries
We will refer to the (1+1) \(A\) that uses SBM as the (1+1) EA, the most widely studied evolutionary algorithm.
Note that Algorithm 1 uses strict selection, i. e. only strict improvements are accepted. For most of our theoretical results we also consider a variant of Algorithm 1 with nonstrict selection, where the acceptance condition “\(f(y) > f(x)\)” is replaced by “\(f(y) \ge f(x)\)”.
3 Easiest and Hardest Functions
Let T(A, f, x) denote the expected number of function evaluations for the (1+1) \(A\) to find an optimal solution for the first time when starting at x (expected hitting time). In the following we only consider algorithms and functions that lead to a finite expected hitting time.
Definition 1
[10, Definition 1] Given a (1+1) \(A\) for maximising a class of fitness functions with the same optima (denoted by \(\mathcal {F}\)), a function f in the class is said to be an easiest function for the (1+1) \(A\) if \(T(A,f,x) \le T(A, g,x)\) for every \(g \in \mathcal {F}\) and every \(x \in S\). A function f in the class is said to be a hardest function for the (1+1) \(A\) if \(T(A,f,x) \ge T(A, g,x)\) for every \(g \in \mathcal {F}\) and every \(x \in S\).
The above definition of easiest and hardest functions is based on a pointbypoint comparison of the runtime of the EA on two fitness functions. The criteria stated in the following Lemmas 4 and 5 for determining whether a fitness function is an easiest or hardest function for a (1+1) \(A\) were originally given in [10]. The main proof idea in [10] is to apply additive drift theorems [11], taking the expected hitting time as drift function (distance to the target state). We state these drift theorems as Theorem 2, referring to the presentation of Lehre and Witt [25], who provided a selfcontained proof.
Theorem 2
 (i)
If \({\text {E}\left( X_t  X_{t+1} \mid X_0, \dots , X_t; X_t > 0\right) } \ge \delta _u\) then \({\text {E}\left( T \mid X_0\right) } \le X_0/\delta _u\).
 (ii)
If \({\text {E}\left( X_t  X_{t+1} \mid X_0, \dots , X_t\right) } \le \delta _\ell \) then \({\text {E}\left( T \mid X_0\right) } \ge X_0/\delta _\ell \).
Before presenting those criteria, we state and prove the following helper lemma. It is stated as Lemma 3 in [10] without proof.
Lemma 3
If the expected time T(A, f, x) is used as the drift function, then the expected drift^{1} is \(\varDelta _f(x)=1\) for all nonoptimal search points x.
Proof
First, we have the following criterion of determining whether a fitness function is an easiest function for a (1+1) \(A\). The two lemmas below extend Theorem 1 and Theorem 2 in [10], respectively, as they are applicable to both strict elitist selection (that is, the parent x is replaced by the child y if \(f(y) > f(x)\)) and nonstrict elitist selection (that is, the parent x is replaced by the child y if \(f(y) \ge f(x)\)). The framework in [10] was restricted to strict selection.
Lemma 4

for any two points x and y, if \(T(A,f,x) < T(A,f,y)\), then \(f(x) > f(y)\),
Proof
Let g(x) be any fitness function with the same optima as f(x). Choose the runtime T(A, f, x) as the drift function: \(d(x)= T(A,f,x)\).
When maximising f(x), according to Lemma 3, for any nonoptimal point x the drift \(\varDelta _{f}(x) =1.\) In the following we prove that the drift \(\varDelta _{g}(x) \le \varDelta _{f}(x)=1\).
 Negative drift:
 let x and y be two points such that \(d(x) < d(y)\). According to the monotonically decreasing condition, \(f(x) > f(y)\). For f(x), since \(f(x) > f(y)\), y is never accepted and then \( \varDelta ^_{f} (x)= 0. \) But for g(x), the negative drift is not positive. Thus we have$$\begin{aligned} \varDelta ^_{g} (x) \le 0=\varDelta ^_{f} (x). \end{aligned}$$(2)
 Positive drift:

let x and y be two points such that \(d(x) > d(y)\). If y is an optimum, then naturally \(f(x) < f(y)\). If y is not an optimum, then according to the monotonically decreasing condition, \(f(x) < f(y)\).
Let \(P^{[m]}(x,y)\) denote the probability of mutating x into y (which is independent of f or g).
For f(x), since \(f(x)<f(y)\), y is always accepted and then \( P_{f}(x,y)=P^{[m]}(x,y). \) But for g(x), since g(x) might be larger, smaller than or equal to g(y), \(P_{g}(x,y)\le P^{[m]}(x,y)\). Hence$$\begin{aligned} \varDelta ^+_{g}(x) =\;&\sum _{y: d(x)> d (y)} P_{g}( x, y) ( d (x) d(y)) \\ \le \;&\sum _{y:d (x) >d (y)} P_{f}( x, y) ( d (x) d(y))=\varDelta ^+_{f}(x). \end{aligned}$$
Considering both negative drift and positive drift, we get \( {\varDelta _{g} (x) \le \varDelta _{f}(x)=1} \). Since \(\varDelta _{g} (x) \le 1\) for all x, according to Theorem 2, the expected runtime is \(T(A,g,x) \ge d(x)=T(A,f,x)\) and the theorem statement is derived. \(\square \)
In a similar way, we have the following criterion of determining whether a fitness function is a hardest function for a (1+1) \(A\), assuming that all expected optimisation times are finite^{2}. The monotonically decreasing condition in the above lemma is replaced by the monotonically increasing condition.
Lemma 5

for any two nonoptimal points x and y, if \(T(A,f,x)< T(A,f,y)\), then \(f(x) < f(y)\),
Proof
Let g(x) be any fitness function with the same optima as f(x). Choose the runtime T(A, f, x) as the drift function: \(d(x)= T(A,f,x)\).
 Positive drift:
 let x and y be two points such that \(d(x) > d(y)\). Let \(P^{[m]}(x,y)\) denote the probability of mutating x into y (which is independent of f or g). For f(x), if y is an optimum point, then the probability that x is mutated into y and is accepted, \(P_{f}(x,y)\), is equal to \(P^{[m]}(x,y)\). Similarly for g(x), \(P_{g}(x,y)=P^{[m]}(x,y)\) if y is an optimum point. If y is not an optimum point, according to the monotonically increasing condition, \(f(x) > f(y)\). For f(x), since \(f(x) > f(y)\), the probability \(P_{f}(x,y)=0\). But for g(x), since g(x) might be larger, smaller than or equal to g(y), \(P_{g}(x,y)\ge 0\). Thus we have \(P_{g}(x,y)\ge P_{f}(x,y)\) for all (x, y) such that \(d(x)>d(y)\). Therefore, the positive drifts for g and f satisfy$$\begin{aligned} \varDelta ^+_{g}(x) =\;&\sum _{y: d(x)> d (y)} P_{g}( x, y) ( d (x) d(y)) \\ \ge \;&\sum _{y:d (x) >d (y)} P_{f}( x, y) ( d (x) d(y))=\varDelta ^+_{f}(x). \end{aligned}$$
 Negative drift:

let x and y be two points such that \(d(x) < d(y)\). Then according to the monotonically increasing condition, \(f(x) < f(y)\).
For f(x), since \(f(x)<f(y)\), y is always accepted and then \( P_{f}(x,y)=P^{[m]}(x,y). \) But for g(x), since g(x) might be larger, smaller than or equal to g(y), \(P_{g}(x,y)\le P^{[m]}(x,y)\). Hence$$\begin{aligned} \varDelta ^_{g}(x) =\;&\sum _{y: d(x)< d (y)} P_{g}( x, y) ( d (x) d(y)) \\ \ge \;&\sum _{y:d (x) <d (y)} P_{f}( x, y) ( d (x) d(y))=\varDelta ^_{f}(x). \end{aligned}$$
Considering both negative drift and positive drift, we get \( {\varDelta _{g} (x) \ge \varDelta _{f}(x)=1} \). Since \(\varDelta _{g} (x) \ge 1\) for all x, according to Theorem 2, the expected runtime is \(T(A,g,x) \le d(x)=T(A,f,x)\) and the theorem statement is derived. \(\square \)
The framework due to He et al. [10] is restricted to search heuristics that base their search on a single point in the search space and it is not obvious how to expand this to populationbased algorithms. However, it is worth mentioning that the framework is not restricted to (1+1)style algorithms. It can also be applied to algorithms that employ elitist selection but have a more complicated way of deciding on the next search point to use as next parameter. Such algorithms can be described as (1+1)style algorithms with a much more complex mutation operator or, perhaps more adequately, by exactly the same kind of Markov chain as that of a (1+1)style algorithm, i. e., by a Markov chain of the same size \(2^n \times 2^n\). Algorithms where this is true include the (1+\(\lambda \)) EA (see, e.g., [13]) that creates \(\lambda \) offspring by means of mutation, independently and identically distributed, and a best one replaces the current population if its fitness is not worse. In this sense the framework can deal with populationbased heuristics (given that the population is restricted to a larger offspring population, not a larger parent population). It can also be applied beyond mutationbased algorithms to genetic algorithms with crossover if the restriction of a population of size only 1 is met. An example for such an algorithm is the socalled (1+(\(\lambda \), \(\lambda \))) GA [7], the first realistic evolutionary algorithm to provably beat the \({\varOmega \left( n\log n\right) }\) lower bound on \(\text {OneMax} \). We see that the framework is much more general and useful than it may appear at first sight.
We have already mentioned that we consider functions where an algorithm does not have finite expected optimisation time to be harder than those with finite expected optimisation times. It is well known that CHM (Algorithm 3) can be trapped in local optima when the parameter r is set to \(r=1\) [2] (see [17, p. 521] for a concrete example demonstrating this effect). Setting \(r=1\), however, reveals properties of the hypermutation operator in the clearest way and this is the reason we stick to this choice (compare [17]). This implies that analysing hardest functions for (1+1) CHM does not make much sense because it is easy to find functions where there is a positive probability that the algorithm gets stuck in a local optimum so that, consequently, the expected optimisation time is not finite. One could consider different measures of hardness for this situation, e. g., considering the conditional expected optimisation time given that a global optimum is found or, alternatively, considering the probability not to find a global optimum. This, however, is beyond the scope of this article.
4 Contiguous Hypermutations on an Easiest Function with a Unique Global Optimum
We are now ready to derive an easiest function with a unique global optimum for contiguous hypermutations and analyse the performance of the (1+1) CHM on this function.
4.1 Notation and Definition
We use \(x = x[0] x[1] \cdots x[n1] \in \{0, 1\}^n\) as notation for bit strings of length n. For \(a, b \in \{0, 1, \dots , n1\}\) we denote by \(x[a \dots b]\) the concatenation of x[a], \(x[(a+1) \bmod n]\), \(x[(a+2) \bmod n]\), ..., \(x[(a+i) \bmod n]\) where i is the smallest number from \(\{0, 1, \dots , n1\}\) with \((a+i) \bmod n = b\). We denote by \(\left x[a \dots b]\right \) the number of bits in \(x[a \dots b]\), i. e., its length. We say that \(x \in \{0, 1\}^n\) contains a 1block from a to b if \(x[a \dots b] = 1^{\left x[a \dots b]\right }\) and \(x[(a1)\bmod n] = x[(b+1)\bmod n] = 0\) hold. Analogously we may speak of a 0block from a to b. Note that bit strings need to contain at least one 0bit and at least one 1bit to contain a 0block or a 1block. It is easy to see that each \(x \in \{0, 1\}^n \setminus \{0^n, 1^n\}\) contains an equal number of 0blocks and 1blocks.
Definition 6
We define an easiest function with unique global optimum for contiguous hypermutations by defining a partition \(L_0 \mathrel {\dot{\cup }} L_1\mathrel {\dot{\cup }} L_2 \mathrel {\dot{\cup }} \cdots \mathrel {\dot{\cup }} L_l = \{0, 1\}^n\) and assigning fitness values accordingly. We call the function \(\textsc {MinBlocks} \) and define \(\textsc {MinBlocks} (x) = l  i\) for \(x \in L_i\). We define \(l = \left\lfloor n/2\right\rfloor +1\) and level sets \(L_0 = \{ 1^n \}\), \(L_1 = \{ 0^n \}\) and \(L_i = \large \{ x \in \{0, 1\}^n \mid x\) contains \(i1\) different 1blocks\(\large \}\) for each \(i \in \{2, 3, \dots , l\}\).
The function has a unique global optimum \(1^n\) with function value \(l = \left\lfloor n/2\right\rfloor +1\). The second best bit string is \(0^n\) with function value \(l1\). All other bit strings contain an equal number of 0blocks and 1blocks. A bit string with j 1blocks is in level set \(L_{j+1}\) and thus, its function value equals \(l(j+1)=lj1\).
We defer the proof that MinBlocks is indeed an easiest function for (1+1) CHM to the next section (Theorem 8) in order to make use of arguments from the analysis of the expected optimisation time performed there.
4.2 Expected Optimisation Time
We analyse the expected optimisation time of the (1+1) CHM on MinBlocks, i. e., the expected number of function evaluations executed until the global optimum is reached [12]. To facilitate our analysis, we start with an analysis of the expected optimisation time starting from a bit string from a particular level set which will in turn allow us to prove that MinBlocks is an easiest function for (1+1) CHM. We will then continue with the overall upper and lower bounds for the optimisation time.
Lemma 7
Proof
The statement about \({\text {E}\left( T_0\right) }\) is trivial. For \({\text {E}\left( T_1\right) }\) it suffices to observe that any hypermutation which chooses as mutation length n leads from \(0^n\) to the unique global optimum \(1^n\). Such a mutation has probability \(1/(n+1)\) which implies \({\text {E}\left( T_1\right) } = n+1\). For \({\text {E}\left( T_2\right) }\) we observe that for each \(x \in L_2\) there are two mutations which lead to \(L_0 \cup L_1\), one leading to \(L_0\) and the other leading to \(L_1\). Since \(L_0\) and \(L_1\) are reached with equal probability 1 / 2 we have \({\text {E}\left( T_2\right) } = n(n+1)/2 + {\text {E}\left( T_1\right) }/2 = (n+1)^2/2\). For \({\text {E}\left( T_i\right) }\) with \(i>2\) we observe that only mutations that reduce the number of 1blocks can lead to some \(L_j\) with \(j<i\). It is easy to see that, the number of 1blocks can only be reduced by 1 in one contiguous hypermutation. In order to achieve that a mutation must start at the first bit of a block (either a 0block or a 1block) and end at the last bit of a block (either a 0block or a 1block) but this block cannot be the one just before the block containing the first flipped bit (otherwise the length of the mutation is n, the bit string is inverted and the number of 1blocks remains unchanged). Thus, if there are j blocks in the bit string, the number of such mutations equals \(j(j1)\). For \(x \in L_i\) the number of 1blocks equals \(i1\) and therefore the number of blocks equals \(2i2\) so that there are \((2i2)(2i3)\) such mutations. Thus, the expected time to leave \(L_i\) equals \(n(n+1)/((2i2)(2i3))\) and \({\text {E}\left( T_i\right) } = n(n+1)/((2i2)(2i3))+ {\text {E}\left( T_{i1}\right) }\) follows. \(\square \)
The expected runtimes provided in Lemma 7 allow us to verify whether MinBlocks satisfies the criteria set by Lemma 4. The following theorem establishes MinBlocks as an easiest function for (1+1) CHM.
Theorem 8
MinBlocks is an easiest function for the (1+1) CHM with strict or nonstrict selection among all functions with a unique optimum.
Proof
The theorem follows from Lemma 7, the definition of MinBlocks, and Lemma 4. According to Definition 6, for all \(i\in \{1, 2, \ldots ,\left\lfloor n/2\right\rfloor \}\) the fitness value of solutions in subset \(L_i\) is strictly less than the fitness value of solutions in \(L_{i1}\). Therefore, a solution x has a better MinBlocks value than a solution y, if and only if x and y belong to two distinct subsets \(L_i\) and \(L_j\) respectively such that \(i<j\). Note that in Lemma 7 the expected runtime of the (1+1) CHM initialised with a solution from \(L_i\), \({\text {E}\left( T_i\right) }\), satisfies \({\text {E}\left( T_i\right) }>{\text {E}\left( T_{i1}\right) }\) for all i and thus \(i<j\) implies \({\text {E}\left( T_i\right) }<{\text {E}\left( T_j\right) }\). Therefore, \(\textsc {MinBlocks} (x)>\textsc {MinBlocks} (y)\) if and only if the expected runtimes of (1+1) CHM starting from solutions x and y satisfy \(T(A,f,x)={\text {E}\left( T_i\right) } < {\text {E}\left( T_{j}\right) }=T(A,f,y)\). According to Lemma 4, the above two way implication makes MinBlocks an easiest function for the (1+1) CHM.
We continue our analysis of the expected optimisation time. Note that the following bound asymptotically matches the lower bound of \({\varOmega \left( n^2\right) }\) for contiguous hypermutations and functions with a unique global optimum proven by Jansen and Zarges [17].
Theorem 9
Let T denote the expected optimisation time of the (1+1) CHM with strict or nonstrict selection on MinBlocks. \({\text {E}\left( T\right) } = \ln (2) n^2 \pm {O\left( n\right) }\) holds.
Proof
Consider \(x \in \{0, 1\}^n\) selected uniformly at random. For each \({i {\in } \{0, 1, \dots , n{}1\}}\) we have that a block ends at x[i] if \(x[i] \not = x[(i+1) \bmod n]\) holds. Thus, x[i] is the end of a block with probability 1 / 2 and we see that the expected number of blocks equals n / 2. Let I denote the number of blocks. An application of Chernoff bounds yields that for any constant \(\varepsilon \) with \(0< \varepsilon < 1\) we have \({\text {Pr}\left( I \ge (1\varepsilon ) n/2\right) } = 1e^{{\varOmega \left( n\right) }}\).
4.3 Fixed Budget Analysis
It has been pointed out that the notion of optimisation time does not always capture the nature of how randomised search heuristics are applied in practice. As a result, fixed budget analysis has been introduced as an alternative theoretical perspective [19, 20]. Let \(x_t\) denote the current population after t rounds of contiguous hypermutation and selection. In fixed budget analysis we want to analyse \({\text {E}\left( f(x_t)\right) }\) for all \(t \le {\text {E}\left( T\right) }\) where \({\text {E}\left( T\right) }\) is the expected optimisation time. We do this here for MinBlocks to give a more complete picture about the performance of the (1+1) CHM. Note that a comparison of the (1+1) EA and the (1+1) CHM under the fixed budget perspective has previously been performed for some example functions [21].
We begin with a statement about the expected function value of a uniform random solution, reflecting the way (1+1) \(A\) algorithms are initialised, and prove that it is roughly \((n2)/4 \pm 1/2\).
Theorem 10
Let \(x_0 \in \{0, 1\}^n\) be selected uniformly at random and \(f := \textsc {MinBlocks} \) from Definition 6. For the initial function value \({\text {E}\left( f(x_0)\right) } = \left\lfloor n/2\right\rfloor (n/4)+2^{n}\) holds.
Proof
We know from the analysis of the expected optimisation time in Sect. 4.2 that the expected number of blocks in \(x_0\) equals n / 2. Let \(z(x_0)\) denote the number of 0blocks in \(x_0\) and remember that the number of 0blocks is half the number of blocks. This implies \({\text {E}\left( z(x_0)\right) } = n/4\).
Let \(l=\left\lfloor n/2\right\rfloor +1\) (the value defined in Definition 6). Remember that \(z(1^n) = z(1^0) = 0\) according to our definition of a 0block (see the definition of the notation at the beginning of Sect. 4.1). For \(x_0 \notin \{ 0^n, 1^n \}\) we have \(f(x_0) = l1z(x)\). Furthermore, we have \(f(1^n)=l\) and \(f(0^n) = l1 = l1z(0^n)\). Thus, \(f(x_0) = l1z(x)\) holds always except for the case \(x_0 = 1^n\).
We now give upper and lower bounds on the expected function value after t iterations of the (1+1) CHM.
Theorem 11
Proof
For the smaller of the two lower bounds we replace the actual probabilities by the smallest probability for an increase in function value which equals \(2/(n(n+1))\). We can improve on this weak lower bound slightly by using a technique called multiplicative fixed budget drift as recently introduced by Lengler and Spooner [26]. For a lower bound we need a lower bound on the expected change in function value in one generation given the current function value. If the current bit string contains i bits, we know that the expected change equals \((2i2)(3i2)/(n(n+1))> 3i^2/(n(n+1)) > 3i/(n(n+1))\) where the last inequality is made because Theorem 1 in [26] requires a statement about this drift that is linear. Using this we obtain \(\left\lfloor n/2\right\rfloor +1  \left( \left\lfloor n/2\right\rfloor +1{\text {E}\left( f(x_0)\right) }\right) \cdot (13/(n(n+1)))^t\) as lower bound on the expected function value after t steps.
5 Hybridising Operators
 (1+1) HA:

executing one operator chosen probabilistically according to a given probability distribution \({\varvec{p}}= (p_1, \dots , p_k)\) (Algorithm 4),
 (1+1) HAchained:

executing a chain of operators, where operators are applied probabilistically according to a given probability vector \({\varvec{p}}= (p_1, \dots , p_k)\) (Algorithm 5, note that \({\varvec{p}}\) does not have to be a probability distribution),
 (1+ k ) HA:

executing all operators in parallel and picking the best among the resulting solutions (Algorithm 6), and
 \({{\varvec{k}}} \times \mathbf (1+1)~HA \):

executing all operators sequentially, resulting in a chained sequence of operations, with selection after each operator (Algorithm 7).
The (1+1) HAchained is probably the most commonly used method in hybrid algorithms. For instance, most Genetic Algorithms fall into this category since they use a probability \(p_c\) that crossover is applied before mutation. The (1+1) HA is commonly used in memetic algorithms and hyperheuristics when at each step a variation operator is chosen with some probability; this strategy was called “SimpleRandom” in [5]. Theoretical work on simple hyperheuristics that fall into this framework have previously been accomplished [24]. We also introduce two other hybridisation schemes for which the results presented in this section also hold. These are simplified versions of schemes that are applied in widely used hybrid algorithms. The (1+k) HA algorithm creates offspring by using different operators. This is a common strategy in multimeme memetic algorithms, where multiple memes refer to multiple local improvement heuristics. The idea was called “Greedy approach” in [5]. The same idea also appears in simple island models with heterogeneous islands, that is, each island consists of one individual and uses a different variation operator. A realworld example of where such a strategy is used (albeit with populations and added complexity) is the Wegener system, a popular and effective algorithm in searchbased software testing, where different islands use standard bit mutations with different mutation rates [36]. The \(k \times \)(1+1) HA is interesting as it has some resemblance to the recently introduced (1+(\(\lambda \),\(\lambda \))) GA, since both use selection between the application of the operators. However, the (1+(\(\lambda \),\(\lambda \))) GA does not fall exactly within the \(k \times \)(1+1) HA scheme. In the former, if the final solution is worse than the initial one in the sequence, then the initial solution is accepted for the next generation. On the other hand, the \(k \times \)(1+1) HA always accepts the last improving solution in the sequence.
The Bcell algorithm (BCA) [23] is an example of an algorithm that uses both SBM and CHM considered in this paper. More specifically, it uses a population of search points and creates \(\lambda \) clones for each of them. It then applies standard bit mutation to a randomly selected clone for each parent search point and subsequently applies CHM to all clones. This way one offspring of each parent is subject to a sequence of two mutations, first standard bit mutation and afterwards CHM. Jansen et al. [14] proposed a variant of the BCA that only uses CHM with constant probability \(0<p<1\) (instead of \(p=1\)) and were able to show significantly improved upper bounds on the optimisation time for this algorithm on instances of the vertex cover problem. Considering the individuals that undergo both kinds of mutation (or a (1+1)style BCA), both these variants fit within the (1+1) HAchained model of hybridisation (Algorithm 5). More precisely, for \({\varvec{p}}= (p_1, p_2)\) with \(p_1\) the probability to execute SBM and \(p_2\) the probability to execute CHM, we have \(p_1=p_2=1\) for the original BCA and constant \(p_1=1\) and \(0< p_2 < 1\) for the modified BCA in [14]. We remark that the improved results in [14] in fact hold as long as \(p_1 = {\varOmega \left( 1\right) }\).
In the following subsection we will first consider the general hybrid algorithmic framework and then specialise the results to the combination of CHM and SBM.
5.1 The Advantage of Hybridisation
The easiest functions for SBM and CHM are OneMax and MinBlocks, respectively. Before analysing hybrid algorithms using both operators, it is natural to consider the effect of one operator on the easiest function for the other operator. It is well known that the (1+1) CHM needs \(\Theta (n^2 \log n)\) expected time on OneMax [17, 21].
Here we consider the expected optimisation time of the (1+1) EA on MinBlocks and show that it is very inefficient.
Theorem 12
The expected optimisation time of the (1+1) EA with strict or nonstrict selection on MinBlocks is at least \(n^n/2\).
Proof
The function MinBlocks has the following property: for all search points except for \(0^n\) and \(1^n\), the number of 0blocks equals the number of 1blocks. Notice that inverting all bits in a bit string turns all 0blocks into 1blocks and vice versa. Hence for all \(x \notin \{0^n, 1^n\}\) we have \(\textsc {MinBlocks} (x) = \textsc {MinBlocks} (\overline{x})\).
Let \(x_0, x_1, \dots \) be the trajectory of the (1+1) EA and \(T \in {\mathbb {N}}_0\) be the first hitting time of a search point in \(\{0^n, 1^n\}\). Since \(x_0, x_1, \dots , x_T\) has the same probability as \(\overline{x_0}, \overline{x_1}, \dots , \overline{x_T}\) and \(x_T \in \{0^n, 1^n\}\), we have \({\text {Pr}\left( x_T = 0^n\right) } = 1/2\). In this case the only accepted search point is the global optimum \(1^n\), for which all bits have to be flipped in one mutation. This has probability \(n^{n}\) and expected waiting time \(n^n\). Combined with the probability of reaching this state, the expected optimisation time is at least \(T + n^n/2 \ge n^n/2\). \(\square \)
Note that the expected optimisation time of the (1+1) EA on MinBlocks is only by a factor of at most 2 smaller than the expected optimisation time of the (1+1) EA on its hardest function, Trap, which is almost \(n^n\) [9].
Using multiple operators, the hope is that the advantages of each operator are combined. However, this is not always true: new operators can make a hybrid algorithm follow an entirely different search trajectory and lead to drastically increased optimisation times. This behaviour was demonstrated for memetic algorithms [31] as well as for standard bit mutations cycling between different mutation rates [15] and for population based EAs where the mutation rate of each individual depends on its rank in the population [28].
We show that such effects cannot occur when dealing with easiest functions. If f is an easiest function for A which is a (1+1) \(A\), then Theorem 13 stated below allows to transfer an upper bound on the expected optimisation time of A to the four hybrid algorithms.
Theorem 13
Proof
Using Theorem 13 as well as Theorem 9, we get the following corollary concerning the SBM and CHM operators.
Corollary 14
Consider the hybrid algorithms (1+1) HA\(({\varvec{p}})\) and (1+1) HAchained\(({\varvec{p}})\) for \({\varvec{p}}= (p_1, p_2)\) with constant \(p_1, p_2 > 0\), (1+2) HA, and \(2 \times \)(1+1) HA, all based on a (1+1) algorithm \(A_1\) using SBM and another (1+1) algorithm \(A_2\) using CHM; \(A_1\) and \(A_2\) both using strict or nonstrict selection. Then the expected optimisation time of all these hybrids on OneMax and MinBlocks is \(O(n \log n)\) and \(O(n^2)\), respectively.
All hybrid algorithms are hence able to combine the advantages of both operators on the two easiest functions for its two operators. This is particularly true for the modified (1+1)style BCA [14] with constant \(0< p_1, p_2 < 1\) discussed at the beginning of Sect. 5.
5.2 Weighted Combinations of OneMax and MinBlocks
In the previous subsection it was proven that the four different hybrid schemes (1+1) HA\(({\varvec{p}})\) for \({\varvec{p}}= (p_1, p_2)\) with constant \(p_1, p_2 > 0\), (1+1) HAchained, (1+2) HA, and \(2 \times \)(1+1) HA, using SBM and CHM as operators are all efficient for OneMax and MinBlocks. In particular, even though SBMs alone exhibit very poor performance on MinBlocks, hybrid algorithms using CHM with arbitrarily low constant probability along with SBM are efficient. In this subsection we investigate the performance of the two operators on “hybrid” functions where the fitness depends on both the number of ones and the number of blocks.
We perform 10,000 runs for each of the above pairs of settings for \(n=100\) and depict the average optimisation times in Fig. 2. Figure 2a shows a comparison of the optimisation times of different resulting algorithms (1+1) HA\((p,1p)\) depending on w while Fig. 2b depicts the results for different functions over the parameter p of the hybrid algorithm. Note, that for the sake of recognisability we only depict a subset of the curves in both figures while on each curve we present all available data points. We additionally perform Wilcoxon signed rank tests to assess whether the observed differences in the optimisation times are statistically significant. Fixing a value for w (Fig. 2a) we perform tests for all pairs of algorithms and the 10,000 optimisation times measured for each setting. Similarly, fixing a value for p (Fig. 2b) we perform tests for all pairs of functions. We perform HolmBonferroni correction to account for the large number of tests we execute.
We can see from the experiments in Fig. 2 that the case \(w=0\) is very different from runs with \(w>0\). Recall that \(w=0\) means that the algorithm is confronted with \(\textsc {MinBlocks} \) and that \(w>0\) implies that we add \(w \cdot \text {OneMax} \) to the function value (while, at the same time, reducing the function value by \(w \cdot \textsc {MinBlocks} \)). The addition of \(w \cdot \text {OneMax} \) with an arbitrarily small \(w>0\) introduces a ‘search gradient’ in the fitness landscape: the algorithm is encouraged to increase the number of 1bits by a small increase in fitness (at least as long as this trend is not counteracted by an increase in the number of blocks). The effect is most pronounced for \(p=0\), i. e., for the (1+1) EA where the expected optimisation time is exponential for \(\textsc {MinBlocks} \) and becomes manageable as soon as the \(\text {OneMax} \)component introduces a ‘search gradient’. In a different context, the same effect has been discussed and analysed using different example functions [16].
5.3 On the Easiest Function for Hybrid Algorithms
In the previous subsection it was shown experimentally that as soon as a small OneMax component comes into play, the function \(f_w\) becomes easy for the (1+1) HA(p,\(1p\)) using SBM and CHM independent of the value of p. Nevertheless, in this subsection we show that \(f_w\), for any value of w, is not an easiest function for the (1+1) HA(p,\(1p\)). In particular, we will set \(p=1/2\) and show that the easiest function for the hybrid algorithm (1+1) HA(1 / 2,1 / 2) using SBM and CHM, and strict selection, is more complex than a mere weighted combination \(f_w\) of the two easiest functions for both operators.
He et al. [10] explain how an easiest function can be computed. We construct \(\textsc {EasiestHybrid}_p\), an easiest fitness function for the hybrid algorithm (1+1) HA(p,\(1p\)) from Corollary 14 by implementing their construction procedure and performing the necessary computations numerically. Clearly, this is computationally feasible only for small values of n. Using the unique global optimum as a starting point and level \(L_0\) we can compute the next level of search points with next best and equal fitness by computing for each search point which does not yet have a level the expected time needed to reach \(L_0\) either directly or via a mutation to a search point that already has a level. Search points with minimal time in this round make up the next level. Note that this is actually Dijkstra’s algorithm for computing shortest paths (see, e. g., [3]). Also note that the numerical computation of the actual expected waiting times is easy since the exact transition probabilities for mutations leading from one bit string to another are all known and waiting times are all simply geometrically distributed.
Fitness level landscape of the \(\textsc {EasiestHybrid}_{1/2}\) function for \(n=6\)
Level  Definition  Size  Example  \(\mathbf {P_{L_7}}\)  \(\mathbf {P_{L_8}}\) 

\(L_0\)  1blocks = 0, \(x=\{1^n\}\)  1  111111  =  = 
\(L_1\)  1blocks = 0, \(x=\{0^n\}\)  1  000000  =  = 
\(L_2\)  1blocks = 1; length = {5}  6  111110  \( 1/2 \cdot (\mathbf {3} P_{\mathrm {CHM}} + 2 P_{\mathrm {SBM}_1} + 4 P_{\mathrm {SBM}_3})\)  \( 1/2 \cdot (\mathbf {2} P_{\mathrm {CHM}} + 2 P_{\mathrm {SBM}_1} + 4 P_{\mathrm {SBM}_3})\) 
\(L_3\)  0blocks = 1; length = {5}  6  000001  \( 1/2 \cdot (\mathbf {3} P_{\mathrm {CHM}} + 4 P_{\mathrm {SBM}_3} + 2 P_{\mathrm {SBM}_5})\)  \( 1/2 \cdot (\mathbf {2} P_{\mathrm {CHM}} + 4 P_{\mathrm {SBM}_3} + 2 P_{\mathrm {SBM}_5})\) 
\(L_4\)  1blocks = 1; length = {4}  6  111100  =  = 
\(L_5\)  0blocks = 1; length = {4}  6  000011  =  = 
\(L_6\)  1blocks = 1; length = {3}  6  111000  \( 1/2 \cdot (\mathbf {2} P_{\mathrm {CHM}} + \mathbf {1} P_{\mathrm {SBM}_1} + 4 P_{\mathrm {SBM}_3} + 1 P_{\mathrm {SBM}_5})\)  \( 1/2 \cdot (\mathbf {4} P_{\mathrm {CHM}} + 6 P_{\mathrm {SBM}_3})\) 
\(L_7\)  1blocks = 2; length = {3,1}  6  111010  
\(L_8\)  1blocks = 2; length = {2,2}  3  110110  
\(L_9\)  0blocks = 2; length = {3,1}  6  000101  
\(L_{10}\)  1blocks = 2; length = {2,1}  12  110100  
\(L_{11}\)  0blocks = 2; length = {2,2}  3  001001  
\(L_{12}\)  1blocks = 3; length = {1,1,1}  2  101010 
We consider Algorithm (1+1) HA(p,\(1p\)) which at each step executes either an SBM or a CHM with probability \(p=1/2\) and report in Table 1 the different fitness levels \(L_0,\dots , L_{12}\) of \(\textsc {EasiestHybrid}_{1/2}\) when \(n=6\). From the table it can be noticed that both levels \(L_7\) and \(L_8\) contain bit strings with two 1blocks and four 1bits. However, the lengths of the two 1blocks are different (i. e., three and one for \(L_7\) and two and two for \(L_8\)). The reason why levels \(L_7\) and \(L_8\) are distinct is highlighted in the last two columns of Table 1, which report the probabilities of reaching levels of higher fitness, respectively from levels \(L_7\) and \(L_8\). For any point of the search space belonging to level \(L_7\) there are three different CHMs leading to points in \(L_2\) and \(L_3\) while there are only two CHMs from points in \(L_8\). These extra CHMs lead to higher transition probabilities, hence lower runtimes, to reach levels \(L_2\) and \(L_3\) from \(L_7\), compared to \(L_8\). Also the probability of reaching level \(L_6\) is higher from \(L_7\), mainly because the level may be reached by flipping only one bit while at least three bits need to be flipped for bit strings in \(L_8\). Since the transition probabilities to the remaining levels of higher fitness are the same, the expected runtime from \(L_7\) is lower than that from \(L_8\), explaining why the two levels are distinct (recall that, by construction, the levels are ordered according to increasing expected runtimes).
Concerning the number of different fitness levels, these increase as the problem size n increases. Already for \(n=10\) \(\textsc {EasiestHybrid}_{1/2}\) has 78 different levels, more than the product of the number of OneMax and MinBlocks levels for \(n=10\) (i. e. 66). It is indeed the increase in number of fitness levels as n grows that makes it hard to give a precise definition of the \(\textsc {EasiestHybrid}_{1/2}\) function. We leave this as an open problem for future work.
6 Conclusions
We have extended the analysis of easiest function classes from standard bit mutations to the contiguous somatic hypermutation (CHM) operator used in artificial immune systems. Albeit the recent advances in their theoretical foundations [21, 29, 35] no such results were available concerning artificial immune system operators. With the runtime and fixed budget analyses of the (1+1) CHM on MinBlocks, the corresponding easiest function, we established a lower bound on the (1+1) CHM ’s performance on any function. We also showed that MinBlocks is exponentially hard for the standard (1+1) EA, complementing the known result that the (1+1) CHM performs asymptotically worse by a factor of \({\Theta \left( n\right) }\) compared to the (1+1) EA on OneMax. Furthermore, we proved that several hybrid algorithms combining the (1+1) CHM and the (1+1) EA solve both MinBlocks and OneMax only at a constant factor slower than the pure algorithms.
Experimental work revealed that a fitness function consisting of a weighted combination of MinBlocks and OneMax is easy to optimise for both pure operators and hybrid variants even when the OneMax weight component is very small. Nevertheless, after providing the exact fitness landscape of the easiest function for the (1+1) HA(1 / 2,1 / 2), \(\textsc {EasiestHybrid}_{1/2}\) for small instance sizes, we observed that its structure is more complex than a simple weighted combination of OneMax and MinBlocks. We leave constructing and analysing easiest functions for other operators that fit the (1+1) \(A\) scheme for future work. Similarly, the question about the easiest functions for different schemes of hybridisation remains open.
Footnotes
 1.
In drift analysis, a drift function is a nonnegative function d(x) such that \(d(x)=0\) for an optimal point and \(d(x)\ge 0\) for a nonoptimal point. The expected drift at point x is \({\text {E}\left( d(x)  d(y)\right) }\), where y is the next iteration’s search point. The expected drift is denoted by \(\varDelta _f(x)\) when maximising f(x), or \(\varDelta (x)\) in short.
 2.
Hardest functions are formally only defined for functions and algorithms with finite expected optimisation times. However, we regard functions leading to infinite expected times as being harder than those with finite expected times.
Notes
Acknowledgments
The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/20072013) under Grant Agreement No. 618091 (SAGE) and by the EPSRC under Grant Agreement No. EP/M004252/1. We thank the anonymous reviewers of this manuscript and the previous GECCO 2015 paper for their very useful and constructive comments.
References
 1.Alanazi, F., Lehre, P.K.: Runtime analysis of selection hyperheuristics with classical learning mechanisms. In: Proceedings of the IEEE Congress on Evolutionary Computation (CEC 2014), pp. 2515–2523. IEEE (2014)Google Scholar
 2.Clark, E., Hone, A., Timmis, J.: A markov chain model of the Bcell algorithm. In: Proceedings of the International Conference on Artificial Immune Systems (ICARIS 2005), LNCS 3627, pp. 318–330. Springer (2005)Google Scholar
 3.Cormen, T.H., Leiserson, C.E., Rivest, R.L., Stein, C.: Introduction to Algorithms. MIT Press, London (2001)zbMATHGoogle Scholar
 4.Corus, D., He, J., Jansen, T., Oliveto, P.S., Sudholt, D., Zarges, C.: On easiest functions for somatic contiguous hypermutations and standard bit mutations. In: Proceedings of the Genetic and Evolutionary Computation Conference (GECCO 2015), pp. 1399–1406. ACM (2015)Google Scholar
 5.Cowling, P., Kendall, G., Soubeiga, E.: A hyperheuristic approach to scheduling a sales summit. In: Burke, E., Erben, W. (eds) Proceedings of the Third International Conference on Practice and Theory of Automated Timetabling (PATAT 2000), pp. 176–190. Springer (2001)Google Scholar
 6.de Castro, L.N., Timmis, J.: Artificial Immune Systems: A New Computational Intelligence Approach. Springer, Berlin (2002)zbMATHGoogle Scholar
 7.Doerr, B., Doerr, C., Ebel, F.: From blackbox complexity to designing new genetic algorithms. Theoret. Comput. Sci. 567, 87–104 (2015)MathSciNetCrossRefzbMATHGoogle Scholar
 8.Doerr, B., Johannsen, D., Winzen, C.: Drift analysis and linear functions revisited. In: Proceedings of the IEEE Congress on Evolutionary Computation (CEC 2010), pp. 1967–1974 (2010)Google Scholar
 9.Droste, S., Jansen, T., Wegener, I.: On the analysis of the (1+1) evolutionary algorithm. Theoret. Comput. Sci. 276, 51–81 (2002)MathSciNetCrossRefzbMATHGoogle Scholar
 10.He, J., Chen, T., Yao, X.: On the easiest and hardest fitness functions. IEEE Trans. Evol. Comput. 19(2), 295–305 (2015)CrossRefGoogle Scholar
 11.He, J., Yao, X.: A study of drift analysis for estimating computation time of evolutionary algorithms. Nat. Comput. 3(1), 21–35 (2004)MathSciNetCrossRefzbMATHGoogle Scholar
 12.Jansen, T.: Analyzing Evolutionary Algorithms: The Computer Science Perspective. Springer, Berlin (2013)CrossRefzbMATHGoogle Scholar
 13.Jansen, T., De Jong, K.A., Wegener, I.: On the choice of the offspring population size in evolutionary algorithms. Evol. Comput. 13(4), 413–440 (2005)CrossRefGoogle Scholar
 14.Jansen, T., Oliveto, P.S., Zarges, C.: On the analysis of the immuneinspired Bcell algorithm for the vertex cover problem. In: Proceedings of the International Conference on Artificial Immune Systems (ICARIS 2011), LNCS 6825, pp. 117–131. Springer (2011)Google Scholar
 15.Jansen, T., Wegener, I.: On the choice of the mutation probability for the (1+1) EA. In: Proceedings of the 6th International Conference on Parallel Problem Solving from Nature (PPSN 2000), LNCS 1917, pp. 89–98. Springer (2000)Google Scholar
 16.Jansen, T., Wiegand, R.P.: The cooperative coevolutionary (1+1) EA. Evol. Comput. 12(4), 405–434 (2004)CrossRefGoogle Scholar
 17.Jansen, T., Zarges, C.: Analyzing different variants of immune inspired somatic contiguous hypermutations. Theoret. Comput. Sci. 412(6), 517–533 (2011)MathSciNetCrossRefzbMATHGoogle Scholar
 18.Jansen, T., Zarges, C.: Computing longest common subsequences with the Bcell algorithm. In: Proceedings of the International Conference on Artificial Immune Systems (ICARIS 2012), LNCS 7597, pp. 111–124. Springer (2012)Google Scholar
 19.Jansen, T., Zarges, C.: Fixed budget computations: a different perspective on run time analysis. In: Proceedings of the Genetic and Evolutionary Computation Conference (GECCO 2012), pp. 1325–1332. ACM (2012)Google Scholar
 20.Jansen, T., Zarges, C.: Performance analysis of randomised search heuristics operating with a fixed budget. Theoret. Comput. Sci. 545, 39–58 (2014)MathSciNetCrossRefzbMATHGoogle Scholar
 21.Jansen, T., Zarges, C.: Reevaluating immuneinspired hypermutations using the fixed budget perspective. IEEE Trans. Evol. Comput. 18(5), 674–688 (2014)CrossRefGoogle Scholar
 22.Jansen, T., Zarges, C.: Analysis of randomised search heuristics for dynamic optimisation. Evol. Computation. 23(4), 513–541 (2015)CrossRefGoogle Scholar
 23.Kelsey, J., Timmis, J.: Immune inspired somatic contiguous hypermutations for function optimisation. In: Proceedings of the Genetic and Evolutionary Computation Conference (GECCO 2003). LNCS 2723, pp. 207–218. Springer (2003)Google Scholar
 24.Lehre, P.K., Özcan, E.: A runtime analysis of simple hyperheuristics: to mix or not to mix operators. In: Proceedings of the Twelfth workshop on Foundations of Genetic Algorithms (FOGA 2013), pp. 97–104. ACM (2013)Google Scholar
 25.Lehre, P.K., Witt, C.: General drift analysis with tail bounds. CoRR, abs/1307.2559 (2013)Google Scholar
 26.Lengler, J., Spooner, N.: Fixed budget performance of the (1+1) EA on linear functions. In: Proceedings of the 2015 ACM Conference on Foundations of Genetic Algorithms (FOGA 2015), pp. 52–61 (2015)Google Scholar
 27.Neri, F., Cotta, C., Moscato, P. (eds.): Handbook of Memetic Algorithms. Springer, Berlin (2013)Google Scholar
 28.Oliveto, P.S., Lehre, P.K., Neumann, F.: Theoretical analysis of rankbased mutation—combining exploration and exploitation. In: Proceedings of the IEEE Congress on Evolutionary Computation (CEC 2009), pp. 1455–1462 (2009)Google Scholar
 29.Oliveto, P.S., Sudholt, D.: On the runtime analysis of stochastic ageing mechanisms. In: Proceedings of the Genetic and Evolutionary Computation Conference (GECCO 2014), pp. 113–120. ACM (2014)Google Scholar
 30.Ross, P.: Hyperheuristics. In: Burke, E.K., Kendall, G. (eds.) Search Methodologies, pp. 611–638. Springer, Berlin (2014)CrossRefGoogle Scholar
 31.Sudholt, D.: The impact of parametrization in memetic evolutionary algorithms. Theoret. Comput. Sci. 410(26), 2511–2528 (2009)MathSciNetCrossRefzbMATHGoogle Scholar
 32.Sudholt, D.: Hybridizing evolutionary algorithms with variabledepth search to overcome local optima. Algorithmica 59(3), 343–368 (2011)MathSciNetCrossRefzbMATHGoogle Scholar
 33.Sudholt, D.: A new method for lower bounds on the running time of evolutionary algorithms. IEEE Trans. Evol. Comput. 17(3), 418–435 (2013)CrossRefGoogle Scholar
 34.Sudholt, D., Zarges, C.: Analysis of an iterated local search algorithm for vertex coloring. In: Proceedings of the 21st International Symposium on Algorithms and Computation (ISAAC 2010), LNCS 6506, pp. 340–352. Springer (2010)Google Scholar
 35.Timmis, J., Hone, A., Stibor, T., Clark, E.: Theoretical advances in artificial immune systems. Theoret. Comput. Sci. 403(1), 11–32 (2008)MathSciNetCrossRefzbMATHGoogle Scholar
 36.Wegener, J., Baresel, A., Sthamer, H.: Evolutionary test environment for automatic structural testing. Inf. Softw. Technol. 43(14) 841–854 (2001)Google Scholar
 37.Witt, C.: Tight bounds on the optimization time of a randomized search heuristic on linear functions. Comb. Probab. Comput. 22(2), 294–318 (2013)MathSciNetCrossRefzbMATHGoogle Scholar
Copyright information
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.