Advertisement

Colloid and Polymer Science

, Volume 296, Issue 9, pp 1443–1447 | Cite as

The correlation between theoretical calculations and experimental findings on melting points for PVDF polymer-based gels

  • Raid Khider Salman
Original Contribution
  • 62 Downloads

Abstract

Advanced theoretical thermodynamics are used to correlate experimental data predicting the melting point for polymer-based gel through melting point depression (MPD). The Flory interaction parameter is used to investigate the effect of temperature on phase behavior, and to integrate the MPD equation. The results are correlated with data from two theoretical studies. The data shows satisfactory agreement with one of these studies, but not with the other study. All the data acquired through different resources, as well as the experimental approaches that were used, have been summarized.

Keywords

Melting point depression Polyvinylidene fluoride PVDF gel Flory interaction parameter Solubility parameters 

Notes

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Rim PB, Runt JP (1984) Melting-point depression in crystalline compatible polymer blends. Macromolecules 17(8):1520–1526CrossRefGoogle Scholar
  2. 2.
    Nishi T, Wang T (1975) Melting point depression and kinetic effects of cooling on crystallization in poly (vinylidene fluoride)-poly (methyl methacrylate) mixtures. Macromolecules 8(6):909–915CrossRefGoogle Scholar
  3. 3.
    Rubinstein M, Colby RH (2003) Polymer physics. OUP, OxfordGoogle Scholar
  4. 4.
    Doi M (1996) Introduction to polymer physics. Clarendon PressGoogle Scholar
  5. 5.
    Rostami SD (2000) Advances in theory of equilibrium melting point depression in miscible polymer blends. Eur Polym J 36:2285–2290CrossRefGoogle Scholar
  6. 6.
    Ouano AC, Carothers JA (1980) Dissolution dynamics of some polymers: solvent-polymer boundaries. Polym Eng Sci 20(2):160–166CrossRefGoogle Scholar
  7. 7.
    Salman RK (2014) Gelation and melting point depression in PVDF-based gel electrolytes. University of LeedsGoogle Scholar
  8. 8.
    Flory PJ (1953) Principles of polymer chemistry. Cornell University PressGoogle Scholar
  9. 9.
    Flory PJ, Fox TG (1950) Molecular configuration and thermodynamic parameters from intrinsic viscosities. J Polym Sci 5(6):745–747CrossRefGoogle Scholar
  10. 10.
    Welch GJ, Miller RL (1976) Crystallization of poly(vinylidene fluoride) - equilibrium melting-point and heat of fusion of alpha-polymorph. J Polym Sci B Polym Phys 14(9):1683–1692CrossRefGoogle Scholar
  11. 11.
    Rosenberg Y, Siegman A, Narkis M, Shkolnik S (1991) The sol/gel contribution to the behavior of γ-irradiated poly(vinylidene fluoride). J Appl Polym Sci 43(3):535–541CrossRefGoogle Scholar
  12. 12.
    Barthel J, Feuerlein F (1984) Dielectric-Properties of Propylene Carbonate and Propylene Carbonate Solutions. J Solut Chem 13(6):393–417Google Scholar
  13. 13.
    Barthel J, Neueder R, Roch H, (2000) Density, Relative Permittivity, and Viscosity of Propylene Carbonate + Dimethoxyethane Mixtures from 25 °C to 125 °C. J Chem Eng Data 45(6):1007–1011Google Scholar
  14. 14.
    Rodrı´guez A, Canosa J, Domı´nguez A, Tojo J, (2003) Viscosities of Dimethyl Carbonate or Diethyl Carbonate with Alkanes at Four Temperatures. New UNIFAC-VISCO Parameters. J Chem Eng Data 48:146–151Google Scholar
  15. 15.
    Rivas MA, Pereira SM, Banerji N, Iglesias TP (2004) Permittivity and density of binary systems of {dimethyl or diethyl carbonate} + n-dodecane from T=(288.15 to 328.15) K. J Chem Thermodyn 36(3):183–191Google Scholar
  16. 16.
    Shiao HC, et al. (2000) Low temperature electrolytes for Li-ion PVDF cells. J Power Sources 87(1–2):167–173Google Scholar
  17. 17.
    Mandelkern L, (1964) The crystallization kinetics of polymer-diluent mixtures: The temperature coefficient of the process. Polymer 5(0):637–648Google Scholar
  18. 18.
    Hansen CM, (1967) The Three Dimensional Solubility Parameter Key to Paint Component Affinities: 1.Solvents Plasicizers, Polymers and Resins. Journal of Paint Technology 39(505)Google Scholar
  19. 19.
    Hansen CM, (2007) Hansen Solubility Parameters: A User's Handbook. 2nd ed. Taylor & Francis GroupGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Physics, College of Education for Pure SciencesUniversity of AnbarAnbarIraq

Personalised recommendations