Colloid and Polymer Science

, Volume 286, Issue 8–9, pp 917–926 | Cite as

Growth regimes and spherulites in thin-film poly(ɛ-caprolactone) with amorphous polymers

Original Contribution
First Online:
Received:
Revised:
Accepted:

Abstract

Spherulite ring-band patterns and growth regimes in neat poly(ɛ-caprolactone) (PCL) and its miscible blends were analyzed using polarized-light optical microscopy and differential scanning calorimetry (DSC). Spherulite growth in thin-film forms and transformation of spherulite patterns in different regimes were investigated by comparing neat PCL with its miscible blends. Three miscible diluents in PCL were probed: poly(p-vinyl phenol) (PVPh), poly(benzyl methacrylate) (PBzMA), and poly(phenyl methacrylate) (PPhMA), which represent strong H-bonding and weak polar interactions, respectively. Blending of PCL with miscible amorphous polymers changes the spherulite patterns significantly. The effect of different diluent polymers varies. Inclusion of different amorphous polymers in PCL leads to different extents of suppression in growth rates and induces different spherulitic patterns. The H-bonding interaction leads to that the PCL/PVPh blend shows dendritic crystals and no ring bands. Although PPhMA differs from PBZMA only by a methylene in the chemical structure of repeat unit, the coil-like textures of ring bands in the PCL/PPhMA blend are widely different from the zig-zag ring bands in the PCL/PBzMA blend. Regime plots show that the growth of neat PCL behaves quite differently from any of its blends with amorphous polymers (PVPh, PPhMA, or PBzMA). Regime plots for PCL/PBzMA blend also differ from those for the PCL/PPhMA blend, which correlates with the crystal patterns seen in these two blend systems.

Keywords

Crystallization regime PCL Blends 
This is a preview of subscription content, log in to check access.

Notes

Acknowledgment

This work was financially supported by a basic research grant (NSC-94 2216 E006 003) in three consecutive years from the National Science Council (NSC) of Taiwan.

References

  1. 1.
    Keith HD, Padden FJ (1984) J Polymer 25:28–42CrossRefGoogle Scholar
  2. 2.
    Lovinger AJ, Keith HD (1996) Macromolecules 29:8541–8542CrossRefGoogle Scholar
  3. 3.
    Keith HD, Padden FJ (1996) J Macromolecules 29:7776–7786CrossRefGoogle Scholar
  4. 4.
    Keller A (1955) J Polym Sci 17:291–308CrossRefGoogle Scholar
  5. 5.
    Wang J, Lin CY, Hanzlicek J, Cheng SZD, Geil PH, Grebowicz J, Ho RM (2001) Polymer 42:7171–7180CrossRefGoogle Scholar
  6. 6.
    Hu YS, Liu RYF, Zhang LQ, Rogunova M, Schiraldi DA, Nazarenko S, Hiltner A, Baer E (2002) Macromolecules 35:7326–7337CrossRefGoogle Scholar
  7. 7.
    Ho RM, Ke KZ, Chen M (2000) Macromolecules 33:7529–7537CrossRefGoogle Scholar
  8. 8.
    Wu PL, Woo EM (2003) J Polym Sci Part B: Polym Phys 41:80–93CrossRefGoogle Scholar
  9. 9.
    Wang Z, An L, Jiang W, Jiang B, Wang X (1999) J Polym Sci Part B: Polym Phys 37:2682–2691CrossRefGoogle Scholar
  10. 10.
    Keith HD (1982) Macromolecules 15:122–126CrossRefGoogle Scholar
  11. 11.
    Keith HD, Padden FJ Jr, Russell TP (1989) Macromolecules 22:666–675CrossRefGoogle Scholar
  12. 12.
    Lotz B, Thierry A (2003) Macromolecules 36:286–290CrossRefGoogle Scholar
  13. 13.
    Zhai X, Wang W, Zhang GL, He BL (2006) Macromolecular 39:324–329CrossRefGoogle Scholar
  14. 14.
    Lovinger AJ (1980) J. Polym Sci Polym Phys Ed 18:793CrossRefGoogle Scholar
  15. 15.
    Lotz B, Cheng SZD (2005) Polymer 46:577–610CrossRefGoogle Scholar
  16. 16.
    Hong PD, Chung WT, Hsu CF (2002) Polymer 43:335–3343Google Scholar
  17. 17.
    Chen YF MS thesis, Dept Chem Engn, National Cheng Kung University, Tainan, Taiwan (2007)Google Scholar
  18. 18.
    Kressler J, Svoboda P, Inoue T (1993) Polymer 24:3225–3233CrossRefGoogle Scholar
  19. 19.
    Chen HL, Li LJ, Ou-Yang WC, Hwang JC, Wong WY (1997) Macromolecules 30:1718–1722CrossRefGoogle Scholar
  20. 20.
    Wang TT, Nishi T (1977) Macromolecules 10:421–425CrossRefGoogle Scholar
  21. 21.
    Maclaine JQ, Booth C (1975) Polymer 16:191CrossRefGoogle Scholar
  22. 22.
    Keith HD, Padden FJ Jr (1986) Polymer 27:1463–1471CrossRefGoogle Scholar
  23. 23.
    Alfonso GC, Russell TP (1986) Macromolecules 19:1143–1152CrossRefGoogle Scholar
  24. 24.
    Beech DR, Booth C, Hillier IH, Pickles CJ (1972) Euro Polym J 8:799CrossRefGoogle Scholar
  25. 25.
    Woo EM, Mandal TK (1999) Macromol Rapid Commun 20:46–49CrossRefGoogle Scholar
  26. 26.
    Woo EM, Mandal TK, Lee SC (2000) Colloid Polym Sci 278:1032–1042CrossRefGoogle Scholar
  27. 27.
    Kuo SW, Huang CF, Chang FC (1998) J Polym Sci Polym Phys 39:1348–1359CrossRefGoogle Scholar
  28. 28.
    Coleman MM, Moskala EJ (1983) Polymer 24:251–257CrossRefGoogle Scholar
  29. 29.
    Hoffman JD, Weeks JJ (1962) J Res Natl Bur Stand, Sect A 66:113Google Scholar
  30. 30.
    Hoffman JD, Davis GT, Lauritzen JI (1976) In: Hannay NB (ed) Treatise on solid state chemistry. Plenum, New York Vol 3, Chap 7Google Scholar
  31. 31.
    Yen KC, Mandal TK, Woo EM (2007) J Biomed Mater Res, acceptedGoogle Scholar
  32. 32.
    Roitman DB, Marand H, Millar RL, Hoffman JD (1989) J Phys Chem 93:6919–6926CrossRefGoogle Scholar
  33. 33.
    Cheng SZD, Janimak JJ, Zhang A, Cheng HN (1990) Macromolecules 23:298–303CrossRefGoogle Scholar
  34. 34.
    Abe H, Kikkawa Y, Inoue Y, Doi Y (2001) Biomacromolecules 2:1007–1014CrossRefGoogle Scholar
  35. 35.
    Gedde UW (1995) Polymer physics. Chapman Hall, London, p 184 Chap 8Google Scholar
  36. 36.
    Hoffman JD, Miller RL (1989) Macromolecules 22:3502CrossRefGoogle Scholar

Copyright information

© Springer-Verlag 2008

Authors and Affiliations

  1. 1.Department of Chemical EngineeringNational Cheng Kung UniversityTainanTaiwan

Personalised recommendations