Fast 3D flow reconstructions from 2D cross-plane observations
- 142 Downloads
A computationally efficient flow reconstruction technique is proposed, exploiting homogeneity in a given direction, to recreate three-dimensional instantaneous turbulent velocity fields from snapshots of two dimension planar fields. This methodology, termed as ’snapshot optimisation’ or SO, can help to provide 3D data sets for studies which are currently restricted by the limitations of experimental measurement techniques. The SO method aims at optimising the error between an inlet plane with a homogeneous direction and snapshots, obtained over a sufficient period of time, on the observation plane. The observations are carried out on a plane perpendicular to the inlet plane with a shared edge normal to the homogeneity direction. The method is applicable to all flows which display a direction of homogeneity such as cylinder wake flows, channel flow, mixing layer, and jet (axisymmetric). The ability of the method is assessed with two synthetic data sets, and three experimental PIV data sets. A good reconstruction of the large-scale structures is observed for all cases. The small-scale reconstruction ability is partially limited especially for higher dimensional observation systems. POD-based SO method and averaging SO variations of the method are shown to reduce discontinuities created due to temporal mismatch in the homogenous direction providing a smooth velocity reconstruction. The volumetric reconstruction is seen to capture large-scale structures for synthetic and experimental case studies. The algorithm run time is found to be in the order of a minute providing results comparable with the reference. Such a reconstruction methodology can provide important information for data assimilation in the form of initial condition, background condition, and 3D observations.
The authors would like to thank Anthony Guibert for providing the experimental data sets (cases 3 and 5), and Sylvain Laizet for the channel flow DNS data set.
- Chandramouli P, Heitz D, Memin E (2017) 4D turbulent wake reconstruction using large eddy simulation based variational data assimilation. 2nd workshop on data assimilation & CFD processing for particle image and tracking velocimetry. DelftGoogle Scholar
- Gesemann S, Huhn F, Schanz D, Schröder A (2016) From noisy particle tracks to velocity, acceleration and pressure fields using B-splines and penalties. 18th international symposium on applications of laser and imaging techniques to fluid mechanics. Lisbon, pp 4–7Google Scholar
- Kähler CJ, Kompenhans J (2000) Fundamentals of multiple plane stereo particle image velocimetry. Exp Fluids 29(1):S070–S077Google Scholar
- Robinson C (2015) Image assimilation techniques for large Eddy scale models: application to 3D reconstruction. Scientific, Université de Rennes 1, RennesGoogle Scholar
- Stansby PK (1974) The effects of end plates on the base pressure coefficient of a circular cylinder. Aeronaut J 78(757):36–37Google Scholar
- van Bladel J (1958) On Helmholtz’s theorem in finite regions. Midwestern Universities Research Association, & U.S. Atomic Energy Commission. Midwestern Universities Research Association, Madison, WisconsinGoogle Scholar