Advertisement

Experiments in Fluids

, Volume 36, Issue 3, pp 498–509 | Cite as

Active control of an axisymmetric jet with distributed electromagnetic flap actuators

  • H. Suzuki
  • N. Kasagi
  • Y. Suzuki
Original

Abstract

Miniature electromagnetic flap actuators are developed and mounted on the periphery of the nozzle exit of an axisymmetric jet to induce various flow modes and enhance mixing processes. It is demonstrated that the flap actuators can significantly modify the large-scale vortical structures. In particular, when the flaps are driven in anti-phase on either side of the jet, alternately inclined and bent vortex rings are generated, and the jet bifurcates into two branches. Since the vortex rings are formed at the very vicinity of the nozzle exit, the bifurcation is accomplished as close as x/D=3.

Keywords

Vortex Vorticity Shear Layer Vortex Ring Nozzle Exit 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Notes

Acknowledgements

The authors gratefully acknowledge Professors H. Miura and I. Shimoyama for their guidance in developing the actuators. We would like to thank Mr. N. Kurimoto for his help in the flap characterization. This work was supported through the Grant-in-Aid for Scientific Research (No. 10355010) by the Ministry of Education, Culture, Sports, Science, and Technology.

References

  1. Cantwell BJ (1981) Organized motion in turbulent flow. Ann Rev Fluid Mech 13:457–515CrossRefGoogle Scholar
  2. Corke TC, Kusek SM (1993) Resonance in axisymmetric jets with controlled helical-mode input. J Fluid Mech 249:307–336Google Scholar
  3. Crow SC, Champagne FH (1971) Orderly structure in jet turbulence. J Fluid Mech 48:547–591Google Scholar
  4. Danaila I, Boersma BJ (2000) Direct numerical simulation of bifurcating jets. Phys Fluids 12:1255–1257CrossRefGoogle Scholar
  5. Gad-el-Hak M (1996) Modern developments in flow control. Appl Mech Rev 49:365–379Google Scholar
  6. Gutmark E, Ho CM (1983) Preferred modes and the spreading rates of jets. Phys Fluids 26:2932–2938CrossRefGoogle Scholar
  7. Ho CM, Huerre P (1984) Perturbed free shear layers. Ann Rev Fluid Mech 16:365-424CrossRefGoogle Scholar
  8. Ho CM, Tai YC (1996) Review: MEMS and its applications for flow control. J Fluids Eng 118:437–447Google Scholar
  9. Ho CM, Tai YC (1998) Micro-electro-mechanical-systems (MEMS) and fluid flows. Ann Rev Fluid Mech 30:579–612CrossRefGoogle Scholar
  10. Huang C, Najafi K, Alnajjar E, Christophorou C, Naguib A, Nagib HM (1998) Operation and testing of electrostatic microactuators and micromachined sound detectors for active control of high speed flows. In: Proceedings of the 11th IEEE MEMS Workshop, Heidelberg, pp 81–86Google Scholar
  11. Huerre P, Monkewitz PA (1990) Local and global instabilities in spatially developing flows. Ann Rev Fluid Mech 22:473–537CrossRefGoogle Scholar
  12. Jacobson SA, Reynolds WC (1998) Active control of streamwise vortices and streaks in boundary layers. J Fluid Mech 360:179–211CrossRefGoogle Scholar
  13. Kasagi N (1998) Progress in direct numerical simulation of turbulent transport and its control. Int J Heat Fluid Flow 19:128–134Google Scholar
  14. Lee M, Reynolds WC (1985) Bifurcating and blooming jets. Report TF-22, Thermosciences Division, Department of Mechanical Engineering, Stanford University, Stanford, CAGoogle Scholar
  15. Liu C, Tsao T, Tai YC (1995) Out-of-plane permalloy magnetic actuators for delta-wing control. In: Proceeding of the 8th IEEE MEMS Workshop, Amsterdam, pp 7–12Google Scholar
  16. Longmire EK, Duong LH (1996) Bifurcating jets generated with stepped and sawtooth nozzles. Phys Fluids 8:978–992CrossRefGoogle Scholar
  17. Mankbadi RR (1992) Dynamics and control of coherent structure in turbulent jets. Appl Mech Rev 45:219–247Google Scholar
  18. McMichael JM (1996) Progress and prospects for active flow control using microfabricated electromechanical systems (MEMS). AIAA Paper 96-0306Google Scholar
  19. Moin P, Bewley T (1994) Feedback control of turbulence. Appl Mech Rev 47:S3–S13Google Scholar
  20. Parekh DE, Leonard A, Reynolds WC (1988) Bifurcating jets at high Reynolds numbers. Report TF-35, Thermosciences Division, Department of Mechanical Engineering, Stanford University, Stanford, CAGoogle Scholar
  21. Reeder MF, Samimy M (1996) The evolution of a jet with vortex generating tabs: real-time visualization and quantitative measurements. J Fluid Mech 311:73–118Google Scholar
  22. Robinson SK (1991) Coherent motions in the turbulent boundary layer. Ann Rev Fluid Mech 23:601–639Google Scholar
  23. Smith BL, Glezer A (1997) Vectoring and small scale motions effected in free shear flows using synthetic jet actuators. AIAA-paper 97–0213Google Scholar
  24. Suzuki H, Kasagi N, Suzuki Y (1999a) Active control of an axisymmetric jet with an intelligent nozzle. In: Proceeding of the 1st Symposium on Turbulent shear flow phenomema, Santa Barbara, CA, pp 665–670Google Scholar
  25. Suzuki H, Kasagi N, Suzuki Y, Shima H (1999b) Manipulation of a round jet with electromagnetic flap actuators. In: Proceedings of the 12th IEEE MEMS Conference, Orlando, FL, pp 534–540Google Scholar
  26. Wilkinson SP (1989) Interactive wall turbulence control: viscous drag reduction in boundary layers. Prog Astronaut Aeronaut 123:479Google Scholar
  27. Winant CD, Browand FK (1974) Vortex pairing: the mechanism of mixing layer growth at moderate Reynolds number. J Fluid Mech 63:237–255Google Scholar
  28. Yamamoto F, Uemura T, Iguchi T, Morita Z (1991) A binary correlation method using a proximity function for 2-D and 3-D PTV. Exp Num Flow Vis 128:23–28Google Scholar
  29. Zaman KBMQ, Hussain AKMF (1980) Vortex pairing in a circular jet under controlled excitation. Part 1. General jet response. J. Fluid Mech 101:449–491Google Scholar
  30. Zaman KBMQ, Reeder MF, Samimy M (1994) Control of an axisymmetric jet using vortex generators. Phys Fluids 6:778–793CrossRefGoogle Scholar

Copyright information

© Springer-Verlag 2004

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringThe University of TokyoTokyo Japan

Personalised recommendations