Applied Physics A

, Volume 108, Issue 1, pp 201–209 | Cite as

Improvement on HVOF sprayed Diamalloy coatings by laser irradiation

Article
First Online:
Received:
Accepted:

Abstract

We investigated the structure change, surface properties (roughness, porosity, and hardness), tribological, and electrochemical performances of HVOF sprayed Ni-20Cr-10W-9Mo-4Cu-1C-1B-1Fe (Diamalloy-4006) coatings before and after laser irradiation. The results showed that the friction and wear resistance of the coatings were improved significantly with an optimized laser irradiation process. The improvement can be attributed to the improved roughness and hardness, as well as the formation of oxides Cu x O and Cr2O3 tribofilms. With the laser irradiation treatment, the local corrosion of the coating had a decrease and the selective corrosion resistance of the Diamalloy-4006 coating was improved as a result of the decreasing the size and number of the pores, especially compact interface achieved by laser irradiation.

Keywords

Laser Irradiation Wear Rate HVOF Potentiodynamic Polarization Wear Track 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access.

Notes

Acknowledgements

The project was funded by the Key Laboratory of Inorganic coating materials, Chinese Academy of Sciences. This work was also supported by the key research project of the Anhui Educational Administration Office (KJ2011A041) and the International S&T Cooperation Projects of the Anhui Province (10080703019).

References

  1. 1.
    J.R. Davis, Handbook of Thermal Spray Technology (ASM International, Materials Park, 2004) p. 169 Google Scholar
  2. 2.
    B. Xu, Z. Zhu, Y. Liu Yan, S. Ma, Y. Chen, in Thermal Spray Connects: Explore Its Surfacing Potential—Proceedings of the International Thermal Spray Conference 2005, ed. by E. Lughsheider (ASM International, Materials Park, 2005) p. 700 Google Scholar
  3. 3.
    J. Kawakita, S. Kuroda, T. Fukushima, T. Kodama, Corros. Sci. 45, 2819 (2003) CrossRefGoogle Scholar
  4. 4.
    G. Bolelli, L. Lusvarghi, R. Giovanardi, Surf. Coat. Technol. 202, 4793 (2008) CrossRefGoogle Scholar
  5. 5.
    Z. Liu, J. Cabrero, S. Niang, Z.Y. Al-Taha, Surf. Coat. Technol. 201, 7149 (2007) CrossRefGoogle Scholar
  6. 6.
    D. Triantafyllidis, L. Li, F.H. Stott, Surf. Coat. Technol. 201, 3163 (2006) CrossRefGoogle Scholar
  7. 7.
    S.H. Zhang, T.Y. Cho, J.H. Yoon, M.X. Li, P.W. Shum, S.C. Kwon, Mater. Sci. Eng. B, Solid-State Mater. Adv. Technol. 162, 127 (2009) Google Scholar
  8. 8.
    C. Karatas, B.S. Yilbas, A. Aleem, M. Ahsan, J. Mater. Process. Technol. 183, 234 (2007) CrossRefGoogle Scholar
  9. 9.
    S.H. Zhang, T.Y. Cho, J.H. Yoon, Mater. Charact. 59, 1412 (2008) CrossRefGoogle Scholar
  10. 10.
    L. Fedrizzi, S. Rossi, R. Cristel, P.L. Bonora, Electrochim. Acta 49, 2803 (2004) CrossRefGoogle Scholar
  11. 11.
    S.H. Zhanga, J.H. Yoon, M.X. Li, T.Y. Cho, Mater. Chem. Phys. 119, 458 (2010) CrossRefGoogle Scholar
  12. 12.
    P.A. Kobryn, E.H. Moore, S.L. Semiatin, Scr. Mater. 43, 299 (2000) CrossRefGoogle Scholar
  13. 13.
    J.A. Picas, A. Forn, A. Igartua, G. Mendoza, Surf. Coat. Technol. 174–175, 1095 (2003) CrossRefGoogle Scholar
  14. 14.
    L. Prchlik, S. Sampath, J. Gutleber, G. Bancke, A.W. Ruff, Wear 249, 1103 (2001) CrossRefGoogle Scholar
  15. 15.
    Y. Ishikawa, S. Kuroda, J. Kawakita, Y. Sakamoto, M. Takaya, Surf. Coat. Technol. 201, 4718 (2007) CrossRefGoogle Scholar
  16. 16.
    Q. Yang, T. Senda, A. Ohmori, Wear 254, 23 (2003) CrossRefGoogle Scholar
  17. 17.
    L. Zhao, M. Maurer, F. Fischer, Wear 257, 41 (2004) CrossRefGoogle Scholar
  18. 18.
    S.K. Asl, M.H. Sohi, K. Hokamoto, M. Uemura, Wear 260, 1203 (2006) CrossRefGoogle Scholar
  19. 19.
    P.H. Shipway, D.G. McCartney, T. Sudaprasert, Wear 259, 820 (2005) CrossRefGoogle Scholar
  20. 20.
    W.M. Zhao, Y. Wangb, T. Han, K.-Y. Wu, J. Xue, Surf. Coat. Technol. 183, 118 (2004) CrossRefGoogle Scholar
  21. 21.
    A. Lekatou, E. Regoutas, A.E. Karantzalis, Corros. Sci. 50, 3389 (2008) CrossRefGoogle Scholar
  22. 22.
    P.K. Aw, A.L.K. Tan, T.P. Tan, J. Qiu, Thin Solid Films 516, 5710 (2008) ADSCrossRefGoogle Scholar
  23. 23.
    J.M. Guilemany, J. Fernández, N. Espallargas, P.H. Suegama, Surf. Coat. Technol. 200, 3064 (2006) CrossRefGoogle Scholar
  24. 24.
    J.M. Guilemany, N. Espallargas, P.H. Suegama, A.V. Benedetti, Corros. Sci. 48, 2998 (2006) CrossRefGoogle Scholar
  25. 25.
    G. Bolelli, R. Giovanardi, L. Lusvarghi, T. Manfredini, Corros. Sci. 48, 3375 (2006) CrossRefGoogle Scholar
  26. 26.
    P.H. Suegama, C.S. Fugivara, A.V. Benedetti, J. Fernández, J. Delgado, J.M. Guilemany, Corros. Sci. 47, 605 (2005) CrossRefGoogle Scholar
  27. 27.
    I.B. Singh, D.P. Mandal, M. Singh, S. Das, Corros. Sci. 51, 234 (2009) CrossRefGoogle Scholar
  28. 28.
    J.M. Arroyo, A.E. Diniz, M.S.F. Lima, Surf. Coat. Technol. 204, 2410 (2010) CrossRefGoogle Scholar
  29. 29.
    Z.M. Qi, S. Amada, S. Akiyama, C. Takahashi, Surf. Coat. Technol. 110, 73 (1998) CrossRefGoogle Scholar
  30. 30.
    A. Grabowski, M. Nowak, J. Sleziona, J. Achiev. Mater. Manuf. Eng. 31, 233 (2008) Google Scholar

Copyright information

© Springer-Verlag 2012

Authors and Affiliations

  1. 1.School of Materials Science and EngineeringAnhui University of TechnologyMaanshanChina
  2. 2.Key Laboratory of Inorganic Coating MaterialsChinese Academy of SciencesShanghaiChina

Personalised recommendations