Advertisement

Preparation and physicochemical study of jute and glass composites of epoxy resin of (2E, 6E)-bis(4-hydroxybenzylidene)cyclohexanone

  • P. H. ParsaniaEmail author
  • Dharmesh B. Sankhavara
  • Jalpa Chopda
  • Jignesh P. Patel
Original Paper
  • 4 Downloads

Abstract

Jute and glass composites of epoxy resin of (2E, 6E)-bis(4-hydroxybenzylidene)cyclohexanone (EBHBC) were prepared by compressing molding technique using three different hardeners at 150/120 °C for 3 h under 20 MPa pressure. J-EBHBC-DDM, J-EBHBC-DDS, J-EBHBC-THPA, G-EBHBC-DDS and G-EBHBC-THPA possess 9.8, 19.0, 15.8, 42.9 and 46.7 MPa tensile strength; 93.6, 24.9, 95.0, 97.9 and 184.2 MPa flexural strength; 5.6, 2.9, 3.0, 20.2 and 7.7 kV/mm electric strength; and 4.24 × 109, 2.91 × 1010, 1.35 × 109, 2.78 × 1011 and 2.23 × 1011 Ω cm volume resistivity. The nature and structure of the hardeners have affected mechanical and electrical properties of the jute and glass composites. Water absorption behavior of composites is tested in pure water and 10% each of aqueous HCl, H2SO4, HNO3, NaOH, KOH, NaCl solutions at 35 °C as well as in boiling water. Nature of electrolytes has affected water absorption and diffusivity of solvated water in the composites. Both types of the composites showed excellent hydrolytic stability, high water absorption tendency and longer equilibrium time. Water absorption behavior in the composites was found quite different in different environments indicating different diffusivity in different environments. The composites may be useful for low load bearing housing, electrical and marine applications.

Keywords

Composites Tensile strength flexural strength Electric strength Volume resistivity Water absorption 

Notes

Acknowledgements

The authors are thankful to FIST-DST and SAP-UGC for their generous financial support for instrumentation support to the Department of Chemistry. P. H. Parsania and Dharmesh B. Sankhavara are also thankful to University Grants Commission—New Delhi, for BSR Faculty Fellowship (F.No.18-1/2011 (BSR), February 15, 2016) and Junior Research Fellowship.

References

  1. 1.
    Singha AS, Thakur VK (2009) Synthesis and characterization of short grewia optiva fiber based polymer composites. Polym Compos 31:459–470Google Scholar
  2. 2.
    Singha AS, Thakur VK (2009) Chemical resistance, mechanical and physical properties of biofibers-based polymer composites. Polym Plast Technol Eng 48:736–744CrossRefGoogle Scholar
  3. 3.
    Alkbir MFM, Sapuan SM, Nuraini AA, Ishak MR (2016) Fibre properties and crash worthiness parameters of natural fiber-reinforced composite structure. A literature review. Compos Struct 148:59–73CrossRefGoogle Scholar
  4. 4.
    Gupta M, Srivastava R (2017) Mechanical, thermal and dynamic mechanical analysis of jute fibre reinforced epoxy composite. Indian J Fibre Text Res 42:64–71Google Scholar
  5. 5.
    Sahari J, Sapuan SM, Zainudin ES, Maleque MA (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Mater Des 49:285–289CrossRefGoogle Scholar
  6. 6.
    Gupta M, Srivastava R (2014) Tensile and flexural properties of sisal fibre reinforced epoxy composite: a comparison between unidirectional and mat form of fibres. Procedia Mater Sci 5:2434–2439CrossRefGoogle Scholar
  7. 7.
    Ramnath BV, Kokan S, Raja RN, Sathyanarayanan R, Elanchezhian C, Prasad AR, Manickavasagam VM (2013) Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy composite. Mater Des 51:357–366CrossRefGoogle Scholar
  8. 8.
    Gupta M, Srivastava R (2015) Effect of sisal fibre loading on dynamic mechanical analysis and water absorption behaviour of jute fibre epoxy composite. Mater Today Proc 2:2909–2917CrossRefGoogle Scholar
  9. 9.
    Clemons C, Sanadi AR (2007) Instrumented impact testing of kenaf fiber reinforced polypropylene composites: effects of temperature and composition. J Reinf Plast Compos 26:1587–1602CrossRefGoogle Scholar
  10. 10.
    Patel VA, Bhuva BD, Parsania PH (2009) Performance evaluation of treated–untreated jute–carbon and glass–carbon hybrid composites of bisphenol-C based mixed epoxy–phenolic resins. J Reinf Plast Compos 28:2549–2556CrossRefGoogle Scholar
  11. 11.
    Patel VA, Parsania PH (2010) Performance evaluation of alkali and acrylic acid treated-untreated jute composites of mixed epoxyphenolic resins. J Reinf Plast Compos 29:725–730CrossRefGoogle Scholar
  12. 12.
    Patel VA, Parsania PH (2010) Preparation and physico-chemical study of glass-sisal (treated-untreated) hybrid composites of bisphenol-C based mixed epoxy–phenolic resins. J Reinf Plast Compos 29:52–59CrossRefGoogle Scholar
  13. 13.
    Dunne R, Desai D, Sadiku R, Jayaramudu J (2016) A review of natural fibres, their sustainability and automotive applications. J Reinf Plast Compos 35:1041–1050CrossRefGoogle Scholar
  14. 14.
    Chaudhary V, Gohil PP, Shaikh AA (2015) Development of potential composites through natural fiber reinforcement. J Sci Ind Res 74:93–97Google Scholar
  15. 15.
    Patel Jignesh P, Parsania PH (2018) Biodegradable and biocompatible polymer composites. Elsevier, OxfordGoogle Scholar
  16. 16.
    Sathishkumar TP, Navaneethakrishnan P, Shankar S, Rajasekar R (2013) Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites. Compos Interfaces 20:575–593CrossRefGoogle Scholar
  17. 17.
    Gebai SS, Hallal AM, Hammoud MS (eds) (2018) Mechanical properties of natural fiber reinforced polymers: emerging research and opportunities: emerging research and opportunities. IGI Global, HersheyGoogle Scholar
  18. 18.
    Gujjala R, Ojha S, Acharya SK, Pal SK (2014) Mechanical properties of woven jute–glass hybrid-reinforced epoxy composite. J Compos Mater 48:3445–3455CrossRefGoogle Scholar
  19. 19.
    Raghavendra G, Kumar KA, Kumar MH, Raghu Kumar B, Ojha S (2017) Moisture absorption behavior and its effect on the mechanical properties of jute-reinforced epoxy composite. Polym Compos 38:516–522CrossRefGoogle Scholar
  20. 20.
    Bisaria H, Gupta MK, Shandilya P, Srivastava RK (2015) Effect of fibre length on mechanical properties of randomly oriented short jute fibre reinforced epoxy composite. Mater Today Proc 2:1193–1199CrossRefGoogle Scholar
  21. 21.
    Kopf PW (2000) Phenolic resins. In: Kirk-Othmer (ed) Encyclopedia of chemical technology, 5th ed, vol 18. Wiley, Hoboken, pp 756–801Google Scholar
  22. 22.
    Sen S, Patil S, Argyropoulos DS (2015) Thermal properties of lignin in copolymers, blends, and composites: a review. Green Chem 17:4862–4887CrossRefGoogle Scholar
  23. 23.
    Saba N, Jawaid M, Alothman OY, Paridah MT, Hassan A (2016) Recent advances in epoxy resin, natural fiber-reinforced epoxy composites and their applications. J Reinf Plast Compos 35:447–470CrossRefGoogle Scholar
  24. 24.
    Adroja Pooja P, Ghumara RY, Parsania PH (2013) Physico-chemical study of chalcone moiety containing epoxy resin and its fiber reinforced composites. Des Monomers Polym 16:503–508CrossRefGoogle Scholar
  25. 25.
    Choi DH, Oh SJ, Cha HB, Lee JY (2001) Photochemically bifunctional epoxy compound containing a chalcone moiety. Eur Polym J 37:1951–1959CrossRefGoogle Scholar
  26. 26.
    Vogel AI, Tatchell AR, Funis BS, Hannaford AJ, Smith PWG (1998) Vogel’s textbook of practical organic chemistry, 5th edn. Addison Wesley Longman Ltd., Boston, p 395Google Scholar
  27. 27.
    Chopda Jalpa V, Sankhavara Dharmesh B, Patel Jignesh P, Parsania PH (2019) Synthesis and characterization of epoxy resin of (2E,6E)-bis(4-hydroxybenzylidene)-4-methylcyclohexanone. J Polym Mater 36:161–169Google Scholar
  28. 28.
    Mehta N, Parsania P (2006) Fabrication and evaluation of some mechanical and electrical properties of jute-biomass based hybrid composites. J Appl Polym Sci 100:1754–1758CrossRefGoogle Scholar
  29. 29.
    Das S, Saha AK, Choudhury PK, Basak RK, Mitra BC, Todd T, Lang S, Rowell RM (2000) Effect of steam pretreatment of jute fiber on dimensional stability of jute composite. J Appl Polym Sci 76:1652–1661CrossRefGoogle Scholar
  30. 30.
    Adroja Pooja P, Ghumara RY, Parsania PH (2013) Physico-chemical study of chalcone moiety containing epoxy resin and its fiber reinforced composites. Des Monomers Polym 16:503–508CrossRefGoogle Scholar
  31. 31.
    Pavlidou S, Papaspyrides C (2003) The effect of hygrothermal history on water sorption and interlaminar shear strength of glass/polyester composites with different interfacial strength. Compos Part A Appl Sci Manuf 34:1117–1124CrossRefGoogle Scholar
  32. 32.
    Collings T (1994) Moisture absorption–Fickian diffusion kinetics and moisture profiles. Handbook of polymer fibre composites. Longman Scientific and Technical, Harlow, pp 366–371Google Scholar
  33. 33.
    Thwe MM, Liao K (2002) Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites. Compos Part A Appl Sci Manuf 33:43–52CrossRefGoogle Scholar
  34. 34.
    Thwe MM, Liao K (2003) Environmental effects on bamboo-glass/polypropylene hybrid composites. J Mater Sci 38:363–376CrossRefGoogle Scholar
  35. 35.
    Dash BN, Rana AK, Mishra HK, Nayak SK, Tripathy SS (2000) Novel low-cost jute–polyester composites. III. Weathering and thermal behavior. J Appl Polym Sci 78:1671–1679CrossRefGoogle Scholar
  36. 36.
    Lin-Gibson S, Baranauskas V, Riffle JS, Sorathia U (2002) Cresol novolac–epoxy networks: properties and processability. Polymer 43:7389–7398CrossRefGoogle Scholar
  37. 37.
    Tyberg CS, Bergeron K, Sankarapandian M, Shih P, Loos AC, Dillard DA, McGrath JE, Riffle JS, Sorathia U (2000) Structure–property relationships of void-free phenolic–epoxy matrix materials. Polymer 41:5053–5062CrossRefGoogle Scholar
  38. 38.
    Bao L-R, Yee AF (2002) Effect of temperature on moisture absorption in a bismaleimide resin and its carbon fiber composites. Polymer 43:3987–3997CrossRefGoogle Scholar
  39. 39.
    Lin Q, Zhou X, Dai G (2002) Effect of hydrothermal environment on moisture absorption and mechanical properties of wood flour–filled polypropylene composites. J Appl Polym Sci 85:2824–2832CrossRefGoogle Scholar
  40. 40.
    Espert A, Vilaplana F, Karlsson S (2004) Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Compos Part A Appl Sci Manuf 35:1267–1276CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • P. H. Parsania
    • 1
    Email author
  • Dharmesh B. Sankhavara
    • 1
  • Jalpa Chopda
    • 1
  • Jignesh P. Patel
    • 1
  1. 1.Department of ChemistrySaurashtra UniversityRajkotIndia

Personalised recommendations