Advertisement

Incorporating PCL nanofibers with oyster shell to improve osteogenic differentiation of mesenchymal stem cells

  • Roghaieh DidekhaniEmail author
  • Mahmoud Reza Sohrabi
  • Masoud SoleimaniEmail author
  • Ehsan Seyedjafari
  • Hana Hanaee-Ahvaz
Original Paper
  • 17 Downloads

Abstract

Electrospun poly (Ɛ-caprolactone) (PCL) has been widely utilized as a biomedical scaffold material to regenerate damaged tissues. However, an electrospun scaffold made from PCL can have some drawbacks such as lack of surface bioactivity, low cell adhesion, as well as osteoinduction, which often make it unsuitable as an implant. Moreover, such a scaffold can produce acidic degradations that cause an inflammatory response at the implantation site. To overcome these negative aspects, composite electrospun nanofiber scaffolds of PCL/oyster shell (OS) were developed in this study. Then, surface morphology and chemistry of the given scaffolds were characterized. As well, tensile strength and surface hydrophilicity were evaluated. The osteogenic proliferation and differentiation potentials of these scaffolds were further evaluated through determining basic osteogenic markers using human adipose tissue derived from mesenchymal stem cells. The results revealed that the scaffolds fabricated had a very good surface property and better tensile strength than pristine PCL ones. The osteogenic proliferation and differentiation potentials were also reported to be better than those in pristine PCL scaffolds. Hence, the presence of OS could enhance PCL surface properties and bioactivity. Therefore, PCL/OS composite scaffolds developed in this study were assumed cost-effective and ideal which would offer promising alternatives for bone tissue engineering applications.

Keywords

Polycaprolactone Oyster shell Electrospinning Composite scaffold Bone tissue engineering 

Notes

References

  1. 1.
    Eshraghi S, Das S (2010) Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering. Acta Biomater 6:2467–2476CrossRefGoogle Scholar
  2. 2.
    Gomez-Lizarraga KK, Flores-Morales C, Del Prado-Audelo ML, Alvarez-Perez MA, Pina-Barba MC, Escobedo C (2017) Polycaprolactone-and polycaprolactone/ceramic-based 3D-bioplotted porous scaffolds for bone regeneration: a comparative study. Mater Sci Eng C 79:326–335CrossRefGoogle Scholar
  3. 3.
    Amini AR, Laurencin CT, Nukavarapu SP (2012) Bone tissue engineering: recent advances and challenges. Crit Rev Biomed Eng 40:363–408CrossRefGoogle Scholar
  4. 4.
    Birhanu G, Akbari Javar H, Seyedjafari E, Zandi-Karimi A, Dusti Telgerd M (2017) An improved surface for enhanced stem cell proliferation and osteogenic differentiation using electrospun composite PLLA/P123 scaffold. Artif Cell Nanomed 46:1–8Google Scholar
  5. 5.
    Elangomannan S, Louis K, Dharmaraj BM, Saravanan Kandasamy V, Soundarapandian K, Gopi D (2017) Carbon nanofiber/polycaprolactone/mineralized hydroxyapatite nanofibrous scaffolds for potential orthopedic applications. ACS Appl Mater Interfaces 9:6342–6355CrossRefGoogle Scholar
  6. 6.
    Langer R, Vacanti JP, Vacanti CA, Atala A, Freed LE, Vunjak-Novakovic G (1995) Tissue engineering: biomedical applications. Tissue Eng 1:151–161CrossRefGoogle Scholar
  7. 7.
    Vacanti JP, Langer R (1999) Tissue engineering: the design and fabrication of living replacement devices for surgical reconstruction and transplantation. Lancet 354:S32–S34CrossRefGoogle Scholar
  8. 8.
    Shrivats AR, McDermott MC, Hollinger JO (2014) Bone tissue engineering: state of the union. Drug Discov Today 19:781–786CrossRefGoogle Scholar
  9. 9.
    Ahmadi M, Seyedjafari E, Zargar SJ, Birhanu G, Zandi-Karimi A, Beiki B, Tuzlakoglu K (2017) Osteogenic differentiation of mesenchymal stem cells cultured on PLLA scaffold coated with Wharton’s Jelly. EXCLI J 16:785Google Scholar
  10. 10.
    Motamedian SR, Hosseinpour S, Ahsaie MG, Khojasteh A (2015) Smart scaffolds in bone tissue engineering: a systematic review of literature. World J Stem Cells 7:657CrossRefGoogle Scholar
  11. 11.
    Kim Y, Kim G (2015) Highly roughened polycaprolactone surfaces using oxygen plasma-etching and in vitro mineralization for bone tissue regeneration: fabrication, characterization, and cellular activities. Colloids Surf B Biointerfaces 125:181–189CrossRefGoogle Scholar
  12. 12.
    Rath SN, Pryymachuk G, Bleiziffer OA, Lam ChXF, Arkudas A, Ho STB, Beier JP, Horch RE, Hutmacher DW, Kneser U (2011) Hyaluronan-based heparin-incorporated hydrogels for generation of axially vascularized bioartificial bone tissues: in vitro and in vivo evaluation in a PLDLLA–TCP–PCL-composite system. J Mater Sci Mater Med 22:1279–1291CrossRefGoogle Scholar
  13. 13.
    Temple JP, Hutton DL, Hung BP, Yilgor Huri P, Cook CA, Kondragunta R, Jia X, Grayson WL (2014) Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds. J Biomed Mater Res B 102:4317–4325Google Scholar
  14. 14.
    Prabhakaran MP, Venugopal JR, Chyan TT, Beng Hai L, Chan CK, Yutang Lim A, Ramakrishna S (2008) Electrospun biocomposite nanofibrous scaffolds for neural tissue engineering. Tissue Eng Part A 14:1787–1797CrossRefGoogle Scholar
  15. 15.
    Cipitria A, Skelton A, Dargaville TR, Dalton PD, Hutmacher DW (2011) Design, fabrication and characterization of PCL electrospun scaffolds—a review. J Mater Chem 21:9419–9453CrossRefGoogle Scholar
  16. 16.
    Melchels FPW, Barradas AM, Van Blitterswijk CA, de Boer J, Feijen J, Grijpma DW (2010) Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing. Acta Biomater 6:4208–4217CrossRefGoogle Scholar
  17. 17.
    Park JS, Lee SJ, Jo HH, Lee JH, Kim WD, Lee JY, Park SA (2017) Fabrication and characterization of 3D-printed bone-like β-tricalcium phosphate/polycaprolactone scaffolds for dental tissue engineering. Ind Eng Chem Res 46:175–181CrossRefGoogle Scholar
  18. 18.
    Wu H, Wan Y, Dalai S, Zhang R (2010) Response of rat osteoblasts to polycaprolactone/chitosan blend porous scaffolds. J Biomed Mater Res B 92:238–245CrossRefGoogle Scholar
  19. 19.
    Ho CC, Fang HY, Wang B, Huang TH, Shie MY (2018) The effects of Biodentine/polycaprolactone 3D-scaffold with odontogenesis properties on human dental pulp cells. Int Endod J 51:291–300CrossRefGoogle Scholar
  20. 20.
    Kim MS, Kim G (2014) Three-dimensional electrospun polycaprolactone (PCL)/alginate hybrid composite scaffolds. Carbohydr Polym 114:213–221CrossRefGoogle Scholar
  21. 21.
    Mirhosseini MM, Haddadi‐Asl V, Zargarian SS (2016) Fabrication and characterization of hydrophilic poly (ε‐caprolactone)/pluronic P123 electrospun fibers. J Appl Polym Sci 133:43345–43356CrossRefGoogle Scholar
  22. 22.
    Ghaee A, Nourmohammadi J, Danesh P (2017) Novel chitosan-sulfonated chitosan-polycaprolactone-calcium phosphate nanocomposite scaffold. Carbohydr Polym 157:695–703CrossRefGoogle Scholar
  23. 23.
    Shin SH, Purevdorj O, Castano O, Planell JA, Kim H-W (2012) A short review: recent advances in electrospinning for bone tissue regeneration. Tissue Eng. 3:2041731412443530Google Scholar
  24. 24.
    Díaz E, Sandonis I, Valle MB (2014) In vitro degradation of poly (caprolactone)/nHA composites. J Nanomater 185:1–8CrossRefGoogle Scholar
  25. 25.
    Chakrapani VY, Kumar TS, Raj DK, Kumary TV (2017) Electrospun 3D composite scaffolds for craniofacial critical size defects. J Mater Sci Mater Med 28:119CrossRefGoogle Scholar
  26. 26.
    Liu Z, Ji J, Tang S, Qian J, Yan Y, Yu B, Su J, Wei J (2015) Biocompatibility, degradability, bioactivity and osteogenesis of mesoporous/macroporous scaffolds of mesoporous diopside/poly (L-lactide) composite. J R Soc Interface 12:1–11Google Scholar
  27. 27.
    Vecchio KS, Zhang X, Massie JB, Wang M, Kim ChW (2007) Conversion of bulk seashells to biocompatible hydroxyapatite for bone implants. Acta Biomater 3:910–918CrossRefGoogle Scholar
  28. 28.
    Lee YK, Jung SK, Chang YH, Wang M, Kim CW (2017) Highly bioavailable nanocalcium from oyster shell for preventing osteoporosis in rats. Int J Food Sci Nutr 68:1–10CrossRefGoogle Scholar
  29. 29.
    Yoon GL, Kim BT, Kim BO, Han S-H (2003) Chemical–mechanical characteristics of crushed oyster-shell. Waste Manag 23:825–834CrossRefGoogle Scholar
  30. 30.
    Wu SC, Hsu HC, Wu YN, Ho W-F (2011) Hydroxyapatite synthesized from oyster shell powders by ball milling and heat treatment. Mater Charact 62:1180–1187CrossRefGoogle Scholar
  31. 31.
    Fan L, Zhang S, Zhang X, Zhou H, Lu Z, Wang S (2015) Removal of arsenic from simulation wastewater using nano-iron/oyster shell composites. J Environ Manag 156:109–114CrossRefGoogle Scholar
  32. 32.
    Shen Y, Yang S, Liu J, Xu H, Shi Zh, Lin Zh, Ying X, Guo P, Lin T, Yan Sh, Huang Q, Peng L (2014) Engineering scaffolds integrated with calcium sulfate and oyster shell for enhanced bone tissue regeneration. ACS Appl Mater Interfaces 6:12177–12188CrossRefGoogle Scholar
  33. 33.
    Yang Y, Yao Q, Pu X, Hou Zh, Zhang Q (2011) Biphasic calcium phosphate macroporous scaffolds derived from oyster shells for bone tissue engineering. Chem Eng 173:837–845CrossRefGoogle Scholar
  34. 34.
    Kazemi SY, Biparva P, Ashtiani E (2016) Cerastoderma lamarcki shell as a natural, low cost and new adsorbent to removal of dye pollutant from aqueous solutions: equilibrium and kinetic studies. Ecol Eng 88:82–89CrossRefGoogle Scholar
  35. 35.
    Xue R, Qian Y, Li L, Yao G, Yang L, Sun Y (2017) Polycaprolactone nanofiber scaffold enhances the osteogenic differentiation potency of various human tissue-derived mesenchymal stem cells. Stem Cell Res Ther 8:148CrossRefGoogle Scholar
  36. 36.
    Yu Y, Hua S, Yang M, Fu Z, Teng S, Niu K, Zhao Q, Yi Ch (2016) Fabrication and characterization of electrospinning/3D printing bone tissue engineering scaffold. RSC Adv. 6:110557–110565CrossRefGoogle Scholar
  37. 37.
    Mohammad Ghorbani F, Kaffashi B, Shokrollahi P, Seyedjafari E, Ardeshirylajimi A (2015) PCL/chitosan/Zn-doped nHA electrospun nanocomposite scaffold promotes adipose derived stem cells adhesion and proliferation. Carbohydr Polym. 118:133–142CrossRefGoogle Scholar
  38. 38.
    Amjadian S, Seyedjafari E, Zeynali B, Shabani I (2016) The synergistic effect of nano-hydroxyapatite and dexamethasone in the fibrous delivery system of gelatin and poly (l-lactide) on the osteogenesis of mesenchymal stem cells. Int J Pharm 507:1–11CrossRefGoogle Scholar
  39. 39.
    Miller ND, Williams DF (1987) On the biodegradation of poly-β-hydroxybutyrate (PHB) homopolymer and poly-β-hydroxybutyrate-hydroxyvalerate copolymers. Biomaterials 8:129–137CrossRefGoogle Scholar
  40. 40.
    Mouriès LP, Almeida MJ, Milet Ch, Berland S, Lopez E (2002) Bioactivity of nacre water-soluble organic matrix from the bivalve mollusk Pinctada maxima in three mammalian cell types: fibroblasts, bone marrow stromal cells and osteoblasts. Comp Biochem Physiol B Biochem Mol Biol 132:217–229CrossRefGoogle Scholar
  41. 41.
    Combes C, Miao B, Bareille R, Rey Ch (2006) Preparation, physical–chemical characterisation and cytocompatibility of calcium carbonate cements. Biomaterials 27:1945–1954CrossRefGoogle Scholar
  42. 42.
    Lamghari M, Almeid MJ, Berland S, Huet H, Laurent A, Milet C, Lopez E (1999) Stimulation of bone marrow cells and bone formation by nacre: in vivo and in vitro studies. Bone 25:91S–94SCrossRefGoogle Scholar
  43. 43.
    Lamghari M, Berland S, Laurent A, Huet H, Lopez E (2001) Bone reactions to nacre injected percutaneously into the vertebrae of sheep. Biomaterials 22:555–562CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Roghaieh Didekhani
    • 1
    Email author
  • Mahmoud Reza Sohrabi
    • 1
  • Masoud Soleimani
    • 2
    Email author
  • Ehsan Seyedjafari
    • 3
  • Hana Hanaee-Ahvaz
    • 4
  1. 1.Department of ChemistryIslamic Azad UniversityTehranIran
  2. 2.Hematology Department, Faculty of Medical SciencesTarbiat Modares UniversityTehranIran
  3. 3.Department of Biotechnology, College of ScienceUniversity of TehranTehranIran
  4. 4.Stem Cell Technology Research CenterTehranIran

Personalised recommendations