Advertisement

Toughness and rheological characteristics of poly(lactic acid)/acrylic core–shell rubber blends

  • Jae Yun Lee
  • Seung Hyuk Kwon
  • In-Joo Chin
  • Hyoung Jin ChoiEmail author
Original Paper
  • 20 Downloads

Abstract

This paper reports effects of acrylic core–shell rubber (CSR) on mechanical and rheological properties of poly(lactic acid) (PLA)/CSR blends. The CSR was synthesized via a seeded emulsion polymerization with poly(butyl acrylate) and poly(methyl methacrylate) as core and shell, respectively, and then introduced to PLA using a twin-screw extruder. Toughness of the blends characterized was increased by shear yielding due to micro-voiding formed by de-bonding of CSR. Their shear viscosity, storage, and loss modulus measured using rotational rheometer increased with CSR content. An analysis using Cox–Merz law confirmed that two curves coincided well with each other, while exhibiting shear-thinning behavior.

Keywords

Poly(lactic acid) Acrylic core–shell rubber Toughness Rheological property 

Notes

References

  1. 1.
    Nampoothiri KM, Nair NR, John RP (2010) An overview of the recent developments in polylactide (PLA) research. Bioresour Technol 101:8493–8501CrossRefGoogle Scholar
  2. 2.
    Rasal RM, Janorkar AV, Hirt DE (2010) Poly (lactic acid) modifications. Prog Polym Sci 35:338–356CrossRefGoogle Scholar
  3. 3.
    Liu H, Zhang J (2011) Research progress in toughening modification of poly (lactic acid). J Polym Sci Polym Phys 49:1051–1083CrossRefGoogle Scholar
  4. 4.
    Yoo TW, Yoon HG, Choi SJ, Kim MS, Kim YH, Kim WN (2010) Effects of compatibilizers on the mechanical properties and interfacial tension of polypropylene and poly (lactic acid) blends. Macromol Res 18:583–588CrossRefGoogle Scholar
  5. 5.
    Narimissa E, Gupta RK, Choi HJ, Kao N, Jollands M (2012) Morphological, mechanical, and thermal characterization of biopolymer composites based on polylactide and nanographite platelets. Polym Compos 33:1505–1515CrossRefGoogle Scholar
  6. 6.
    Narimissa E, Gupta RK, Kao N, Choi HJ, Jollands M, Bhattacharya SN (2014) Melt rheological investigation of polylactide–nanographite platelets biopolymer composites. Polym Eng Sci 54:175–188CrossRefGoogle Scholar
  7. 7.
    Narimissa E, Gupta RK, Kao N, Choi HJ, Bhattacharya SN (2015) The comparison between the effects of solvent casting and melt intercalation mixing processes on different characteristics of polylactide–nanographite platelets composites. Polym Eng Sci 55:1560–1570CrossRefGoogle Scholar
  8. 8.
    Lee H, Chin I-J (2016) Toughening effect of annealing-induced intermolecular crystallization of PBA-g-PLLA in PLA matrix. Macromol Res 24:515–521CrossRefGoogle Scholar
  9. 9.
    Yao S-S, Pang Q-Q, Song R, Jin F-L, Park S-J (2016) Fracture toughness improvement of poly (lactic acid) with silicon carbide whiskers. Macromol Res 24:961–964CrossRefGoogle Scholar
  10. 10.
    Chen Y, Yuan D, Xu C (2014) Dynamically vulcanized biobased polylactide/natural rubber blend material with continuous cross-linked rubber phase. ACS Appl Mater Interfaces 6:3811–3816CrossRefGoogle Scholar
  11. 11.
    Liu GC, He YS, Zeng JB, Li QT, Wang YZ (2014) Fully biobased and supertough polylactide-based thermoplastic vulcanizates fabricated by peroxide-induced dynamic vulcanization and interfacial compatibilization. Biomacromol 15:4260–4271CrossRefGoogle Scholar
  12. 12.
    Yuan D, Chen Z, Xu C, Chen K, Chen Y (2015) Fully biobased shape memory material based on novel cocontinuous structure in poly (lactic acid)/natural rubber TPVs fabricated via peroxide-induced dynamic vulcanization and in situ interfacial compatibilization. ACS Sustain Chem Eng 3:2856–2865CrossRefGoogle Scholar
  13. 13.
    Valerio O, Pin JM, Misra M, Mohanty AK (2016) Synthesis of glycerol-based biopolyesters as toughness enhancers for polylactic acid bioplastic through reactive extrusion. ACS Omega 1:1284–1295CrossRefGoogle Scholar
  14. 14.
    Chen Y, Wang W, Yuan D, Xu C, Cao L, Liang X (2018) Bio-Based PLA/NR-PMMA/NR ternary thermoplastic vulcanizates with balanced stiffness and toughness:“Soft–Hard” core–shell continuous rubber phase, in situ compatibilization, and properties. ACS Sustain Chem Eng 6:6488–6496CrossRefGoogle Scholar
  15. 15.
    Zhao T-H, Yuan W-Q, Li Y-D, Weng Y-X, Zeng J-B (2018) Relating chemical structure to toughness via morphology control in fully sustainable sebacic acid cured epoxidized soybean oil toughened polylactide blends. Macromolecules 51:2027–2037CrossRefGoogle Scholar
  16. 16.
    Mehrabi Mazidi M, Edalat A, Berahman R, Hosseini FS (2018) Highly-toughened polylactide- (PLA-) based ternary blends with significantly enhanced glass transition and melt strength: tailoring the interfacial interactions, phase morphology, and performance. Macromolecules 51:4298–4314CrossRefGoogle Scholar
  17. 17.
    Gramlich WM, Robertson ML, Hillmyer MA (2010) Reactive compatibilization of poly (l-lactide) and conjugated soybean oil. Macromolecules 43:2313–2321CrossRefGoogle Scholar
  18. 18.
    Liu H, Song W, Chen F, Guo L, Zhang J (2011) Interaction of microstructure and interfacial adhesion on impact performance of polylactide (PLA) ternary blends. Macromolecules 44:1513–1522CrossRefGoogle Scholar
  19. 19.
    Bai H, Huang HC, Xiu H, Gao Y, Zhang Q, Fu Q (2012) Toughening of poly (l-lactide) with poly (ε-caprolactone): combined effects of matrix crystallization and impact modifier particle size. Polymer 54:5257–5266CrossRefGoogle Scholar
  20. 20.
    Lee JY, Chin I-J, Choi HJ (2018) Effect of particle size and crosslinking on the toughening of core-shell-type rubber-modified poly(lactic acid) composites. Polym Test 65:440–449CrossRefGoogle Scholar
  21. 21.
    Lu M, Keskkula H, Paul D (1996) Toughening of nylon 6 with core-shell impact modifiers: effect of matrix molecular weight. J Appl Polym Sci 59:1467–1477CrossRefGoogle Scholar
  22. 22.
    Kayano Y, Keskkula H, Paul D (1996) Effect of polycarbonate molecular weight and processing conditions on mechanical behaviour of blends with a core-shell impact modifier. Polymer 37:4505–4518CrossRefGoogle Scholar
  23. 23.
    Bucknall C (2001) Blends containing core-shell impact modifiers part 1. Structure and tensile deformation mechanisms (IUPAC technical report). Pure Appl Chem 73:897–912CrossRefGoogle Scholar
  24. 24.
    Wu G, Zhao J, Shi H, Zhang H (2004) The influence of core–shell structured modifiers on the toughness of poly (vinyl chloride). Eur Polym J 40:2451–2456CrossRefGoogle Scholar
  25. 25.
    Cho K, Yang J, Park CE (1998) The effect of rubber particle size on toughening behaviour of rubber-modified poly (methyl methacrylate) with different test methods. Polymer 39:3073–3081CrossRefGoogle Scholar
  26. 26.
    Choi HJ, Ray SS (2011) A review on melt-state viscoelastic properties of polymer nanocomposites. J Nanosci Nanotech 11:8421–8449CrossRefGoogle Scholar
  27. 27.
    Jiang L, Wolcott MP, Zhang J (2006) Study of biodegradable polylactide/poly (butylene adipate-co-terephthalate) blends. Biomacromol 7:199–207CrossRefGoogle Scholar
  28. 28.
    Afrifah KA, Matuana LM (2010) Impact modification of polylactide with a biodegradable ethylene/acrylate copolymer. Macromol Mater Eng 295:802–811CrossRefGoogle Scholar
  29. 29.
    Dompas D, Groeninckx G, Isogawa M, Hasegawa T, Kadokura M (1995) Cavitation versus debonding during deformation of rubber-modified poly (vinyl chloride). Polymer 36:437–441CrossRefGoogle Scholar
  30. 30.
    Carreau PJ (1997) Rheology of polymeric systems: principles and applications. Hanser Publishers, New YorkGoogle Scholar
  31. 31.
    Dou R, Wang W, Zhou Y, Li L-P, Gong L, Yin B, Yang M-B (2013) Effect of core-shell morphology evolution on the rheology, crystallization, and mechanical properties of PA6/EPDM-g-MA/HDPE ternary blend. J Appl Polym Sci 129:253–262CrossRefGoogle Scholar
  32. 32.
    Karis TE, Kono R-N, Kim CA, Jhon MS, Choi HJ (2003) Nonlinear rheology for a grease. J Ind Eng Chem 9:419–425Google Scholar
  33. 33.
    Kim TH, Lim ST, Lee CH, Choi HJ, Jhon MS (2003) Preparation and rheological characterization of intercalated polystyrene/organophilic montmorillonite nanocomposite. J Appl Polym Sci 87:2106–2112CrossRefGoogle Scholar
  34. 34.
    Cox W, Merz E (1958) Correlation of dynamic and steady flow viscosities. J Polym Sci 28:619–622CrossRefGoogle Scholar
  35. 35.
    Choi H, Park S, Yoon J, Lee HS, Choi S (1995) Rheological study on poly-D (-)(3-hydroxybutyrate) and its blends with poly (ethylene oxide). Polym Eng Sci 35:1636–1642CrossRefGoogle Scholar
  36. 36.
    Sohn J-I, Lee C, Lim S, Kim T, Choi H, Jhon M (2003) Viscoelasticity and relaxation characteristics of polystyrene/clay nanocomposite. J Mater Sci 38:1849–1852CrossRefGoogle Scholar
  37. 37.
    Cui L, Zhou Z, Zhang Y, Zhang Y, Zhang X, Zhou W (2007) Rheological behavior of polypropylene/novolac blends. J Appl Polym Sci 106:811–816CrossRefGoogle Scholar
  38. 38.
    Jang W-Y, Hong K-H, Cho B-H, Jang S-H, Lee S-I, Kim B-S, Shin B-Y (2008) Thermal and rheological properties, and biodegradability of chemically modified PLA by reactive extrusion. Polym Korea 32:116–124Google Scholar
  39. 39.
    Li J, Ma G, Sheng J (2010) Linear viscoelastic characteristics of in situ compatiblized binary polymer blends with viscoelastic properties of components variable. J Polym Sci Polym Phys 48:1349–1362CrossRefGoogle Scholar
  40. 40.
    Jang K, Lee JW, Hong I-K, Lee S (2013) Effect of supercritical carbon dioxide as an exfoliation aid on bio-based polyethylene terephthalate glycol-modified/clay nanocomposites. Korea-Aust Rheol J 25:145–152CrossRefGoogle Scholar
  41. 41.
    Trinkle S, Friedrich C (2001) Van Gurp-Palmen-plot: a way to characterize polydispersity of linear polymers. Rheol Acta 40:322–328CrossRefGoogle Scholar
  42. 42.
    Li R, Yu W, Zhou C (2006) Phase behavior and its viscoelastic responses of poly (methyl methacrylate) and poly (styrene-co-maleic anhydride) blend systems. Polym Bull 56:455–466CrossRefGoogle Scholar
  43. 43.
    You Y-C, Kim Y-C (2011) Study on the talc dispersion and rheological properties of PP/talc compound. J Korea Acad-Ind Soc 12:4261–4266Google Scholar
  44. 44.
    Kim YH, Kwon SH, Choi HJ, Choi K, Kao N, Bhattacharya SN, Gupta RK (2016) Thermal, mechanical, and rheological characterization of polylactic acid/halloysite nanotube nanocomposites. J Macromol Sci B 55:680–692CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Polymer Science and EngineeringInha UniversityIncheonKorea
  2. 2.Inha Technical CollegeIncheonKorea

Personalised recommendations