Advertisement

Eco-friendly waterborne coating from bio-based polyester amide resin

  • Mandar S. Gaikwad
  • Vipul V. Kusumkar
  • Omprakash S. Yemul
  • Dilip G. Hundiwale
  • Pramod P. Mahulikar
Original Paper
  • 35 Downloads

Abstract

The vegetable oil-based waterborne polyurethane coatings have gained significant interest due to low volatile organic compounds, and hence, this has been considered as a proper substitute to the commonly used solvent-borne coating systems. In the present work, we have developed the polyurethane coatings from diethanolamide of fatty acid and dicarboxylic acid (sebacic acid and succinic anhydride)-based poly(esteramide) resin as a diol along with 2,2′-dimethylol propionic acid and isophorone diisocyanate. The chemical structure of bio-based diol and PU coatings was elucidated by FTIR and 1H NMR spectroscopy. The polyurethane dispersions (PUDs) prepared were analysed by particle size analysis and stability. The mahua oil-based PUDs were coated on the metal panels and the cured material obtained was characterized by the physico-mechanical, chemical resistance and the thermal properties which were compared with the petroleum resource-based PUDs. The PUD coatings showed good physico-mechanical properties, chemical resistance and thermal stability. Hence, the dispersion prepared from bio-based diols may find application as eco-friendly coatings.

Notes

Acknowledgements

MG is highly thankful to the Department of Science and Technology (DST), New Delhi, India, for the Award of S.R.F. (INSPIRE fellowship IF No. 110738) and the financial assistance.

References

  1. 1.
    Meier MAR, Metzger JO, Schubert US (2007) Plant oil renewable resources as green alternatives in polymer science. Chem Soc Rev 36:1788–1802CrossRefPubMedGoogle Scholar
  2. 2.
    Williams CK, Hillmyer MA (2008) Polymers from renewable resources: a perspective for a special issue of polymer reviews. Polym Rev 48:1–10CrossRefGoogle Scholar
  3. 3.
    Mulhaupt R (2013) Green polymer chemistry and biobased plastics: dreams and reality. Macromol Chem Phys 214:159–174CrossRefGoogle Scholar
  4. 4.
    Nayak PL (2000) Natural oil-based polymers: opportunities and challenges. J Macromol Sci Part C Polym Rev 40:1–21CrossRefGoogle Scholar
  5. 5.
    Sharma V, Kundu PP (2006) Addition polymers from natural oils: a review. Prog Polym Sci 31:983–1008CrossRefGoogle Scholar
  6. 6.
    Athawale VD, Nimbalkar RV (2011) Polyurethane dispersions based on Sardine fish oil, Soybean oil, and their intereserification products. J Dispers Sci Technol 32(7):1014–1022CrossRefGoogle Scholar
  7. 7.
    Biermann U, Friedt W, Lang S, Luhs W, Machmuller G, Metzger UO, Klaas MRG, Schafer HJ, Schneide MP (2000) New syntheses with oils and fats as renewable raw materials for the chemical industry. Angew Chem Int Ed 39:2206–2224CrossRefGoogle Scholar
  8. 8.
    Williams CK, Hillmyer MA (2008) Polymers from renewable resources: a perspective for a special issue of polymer reviews. Polym Rev 48:1–10CrossRefGoogle Scholar
  9. 9.
    Marks WD, Larock RC, Richard C (2002) The conjugation and epoxidation of Fish oil. J Am Oil Chem 79:65–68CrossRefGoogle Scholar
  10. 10.
    Lonescu M (2005) Chemistry and technology of polyols for polyurethane. Rapra Technology, ShrewsburyGoogle Scholar
  11. 11.
    Howard GT (2002) Biodegradation of polyurethane: a review. Int Biodeterior Biodegrad 49:245–252CrossRefGoogle Scholar
  12. 12.
    Xia Y, Larock RC (2011) Soybean oil isosorbide based waterborne polyurethane-urea dispersions. Chemsuschem 4:386–391CrossRefPubMedGoogle Scholar
  13. 13.
    Szycher M (1999) Szycher’s handbook of polyurethanes. CRC, Boca RatanGoogle Scholar
  14. 14.
    Zhang DJ, Jeon HK, Malsam J, Herrington R, Macosko CW (2007) Substituting soybean oil-based polyol into polyurethane flexible foams. Polymer 48(22):6656–6667CrossRefGoogle Scholar
  15. 15.
    Yemul OS, Petrovic ZS (2010) Novel thermoplastic polyurethane elastomers based on methyl-12 hydroxy stearate. ACS symposium series. American Chemical Society, Washington, DCGoogle Scholar
  16. 16.
    Korley LTJ, Pate BD, Thomas EL, Hammond PT (2006) Effect of the degree of soft and hard segment ordering on the morphology and mechanical behavior of semicrystalline segmented polyurethanes. Polymer 47(9):3073–3082CrossRefGoogle Scholar
  17. 17.
    Manavi GN, Jagtap RN (2010) Effect of DMPA content of polyurethane dispersion on coating property. J Dispers Sci Technol 31:1376–1382CrossRefGoogle Scholar
  18. 18.
    Lu Y, Larock RC (2010) Soybean oil based aqueous cationic polyurethane dispersions: synthesis and properties. Prog Org Coat 69(1):31–37CrossRefGoogle Scholar
  19. 19.
    Athawale VD, Nimbalkar RV (2011) Waterborne coatings based on renewable oil resources: an overview. J Am Oil Chem Soc 88:159–185CrossRefGoogle Scholar
  20. 20.
    Lu Y, Larock RC (2010) Aqueous cationic polyurethane dispersions from vegetable oils. Chemsus Chem 3:329–333CrossRefGoogle Scholar
  21. 21.
    Nasrullah MJ, Bahr JA, Lein CG, Webster DC, Roesler RR, Schmitt P (2009) Automated parallel polyurethane dispersion synthesis and characterization. J Coat Technol Res 6(1):1–10CrossRefGoogle Scholar
  22. 22.
    Wicks ZW Jr., Wicks DA, Rosthauser JW (2002) Two package waterborne urethane systems. Prog Org Coat 44(2):161–183CrossRefGoogle Scholar
  23. 23.
    Chattopadhyay DK, Raju KVSN (2007) Structural engineering of polyurethane coating for high performance applications. Prog Polym Sci 32(3):352–418CrossRefGoogle Scholar
  24. 24.
    Lu Y, Larock RC (2008) Soybean-oil based waterborne polyurethane dispersions: effects of polyol functionality and hard segment content on properties. Biomacromolecules 9(11):3332–3340CrossRefPubMedGoogle Scholar
  25. 25.
    Xia Y, Larock RC (2010) Vegetable oil-based polymeric materials: synthesis, properties and applications. Green Chem 12:1893–1909CrossRefGoogle Scholar
  26. 26.
    Lu Y, Tighzert L, Dole P, Erre D (2005) Preparation and properties of starch thermoplastics modified with waterborne polyurethane from renewable resources. Polymer 46(23):9863–9870CrossRefGoogle Scholar
  27. 27.
    Bahr M, Mulhaupt R (2012) Linseed oil and Soybean oil-based polyurethane prepared via the non-isocyanate route and catalytic carbon dioxide conversion. Green Chem 14:483–489CrossRefGoogle Scholar
  28. 28.
    Ahmad S, Ashraf SM, Naqvi F, Yadav S, Hasnat A (2003) A polyesteramide from Pongamia glabra oil for biologically safe anticorrosive coating. Prog Org Coat 47:95–102CrossRefGoogle Scholar
  29. 29.
    Yemul OS, Dawane BS, Shaikh IG, Thamke V, Kodam K (2013) Biodegradable bioepoxy resin from Mahua oil. Res J Sci 2:16–20Google Scholar
  30. 30.
    Puhan S, Vedaraman N, Sankaranarayanan G, Ram BVB (2005) Performance and emission study of Mahua oil (Madhuca indica oil) ethyl ester in a 4-stroke natural aspirated direct injection diesel engine. Renew Energy 30:1269–1278CrossRefGoogle Scholar
  31. 31.
    Azam MM, Waris A, Nahar NM (2005) Prospects and potential of fatty acid methyl esters of some non-traditional seed oils for use as biodiesel in India. Biomass Bioenergy 29:293–302CrossRefGoogle Scholar
  32. 32.
    Raheman H, Ghadge SV (2007) Performance of compression ignition engine with mahua (Madhuca indica) biodiesel. Fuel 86:2568–2573CrossRefGoogle Scholar
  33. 33.
    Ghadge SV, Raheman H (2005) Biodiesel production from Mahua (Madhuca indica) oil having high free fatty acids. Biomass Bioenerg 28(6):601–605CrossRefGoogle Scholar
  34. 34.
    Goud VV, Patwardhan AV, Pradhan NC (2006) Studies on the epoxidation of mahua oil (Madhumica indica) by hydrogen peroxide. Bioresour Technol 97:1365–1371CrossRefPubMedGoogle Scholar
  35. 35.
    Szycher M (2013) Szycher’s handbook of polyurethanes, vol 2. Routledge, Taylor and Francis GroupGoogle Scholar
  36. 36.
    Prabhakar A, Chattopadhayay DK, Jagdeesh B, Raju KVSN (2005) Structural investigations of polypropylene glycol (PPG) and isophorone diisocyanate (IPDI) based polyurethane prepolymer by 1D and 2D NMR spectroscopy. J Polym Sci Part A Polym Chem 43:1196–1209CrossRefGoogle Scholar
  37. 37.
    Chaudhari AB, Gite VV, Rajput SD, Mahulikar PP, Kulkarni RD (2013) Development of eco-friendly polyurethane coatings based on neem oil polyetheramide. Ind Crop Prod 50:550–556CrossRefGoogle Scholar
  38. 38.
    Pawar MS, Kadam A, Yemul OS (2015) Development of polyetheramide based corrosion protective polyurethane coating from Mahua oil. Prog Org Coat 89:143–149CrossRefGoogle Scholar
  39. 39.
    Wang Y, Anderson CC (1998) Coating composition including polyurethane for imaging elements. Google Patents, 8 December 1998Google Scholar
  40. 40.
    Ni B, Yang L, Wang C, Wang L, Finlow DE (2010) Synthesis and thermal properties of soybean oil-based waterborne polyurethane coatings. J Therm Anal Colorim 100:239–246CrossRefGoogle Scholar
  41. 41.
    Wang Y, Chester C (1998) Coating composition including polyurethane for imaging elements. Eastman Kodak Company, New YorkGoogle Scholar
  42. 42.
    Meera KMS, Sankar RM, Paul J, Jaisankar SN, Mandal AB (2014) The influence of applied silica nanoparticles on a bio-renewable castor oil based polyurethane nanocomposite and its physicochemical properties. Phys Chem Chem Phys 16:9276–9288CrossRefGoogle Scholar
  43. 43.
    Gaikwad MS, Gite VV, Mahulikar PP, Hundiwale DG, Yemul OS (2015) Eco-friendly polyurethane coatings from cottonseed and karanja oil. Prog Org Coat 86:164–172CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Lokmangal Science and Entrepreneurship CollegeWadala, SolapurIndia
  2. 2.School of Chemical SciencesSwami Ramanand Teerth Marathwada UniversityNandedIndia
  3. 3.School of Chemical SciencesNorth Maharashtra UniversityJalgaonIndia

Personalised recommendations