Effect of solid-state polycondensation on crystalline structure and mechanical properties of recycled polyethylene-terephthalate
- 31 Downloads
Solid-state polycondensation process of recycled polyethylene-terephthalate and its effect on crystalline structure and mechanical properties were investigated. A three-phase morphological model was applied for the evaluation of crystalline structure, while mechanical properties were determined by dynamic mechanical analysis. The effect of solid-state polycondensation process on morphology was investigated and described in detail. A new method was used to analyze the effect of solid-state polycondensation process on mechanical properties. Relationship was found between evolved crystalline structure and storage modulus of samples.
KeywordsRecycled polyethylene-terephthalate Solid-state polycondensation Morphology Mechanical properties
This research was realized in the frames of TÁMOP 4.2.4. A/1-11-1-2012-0001: “National Excellence Program—Elaborating and operating an inland student and researcher personal support system.” The project was subsidized by the European Union and co-financed by the European Social Fund. The infrastructure of the research project was supported by the Hungarian Scientific Research Fund (OTKA K109224).
- 5.Badia JD, Strömberg E, Karlsson S, Ribes-Greus A (2012) The role of crystalline, mobile amorphous rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET). Polym Degrad Stabil 97:98–107. https://doi.org/10.1016/j.polymdegradstab.2011.10.008 CrossRefGoogle Scholar
- 6.Kao CY, Cheng WH, Wan BZ (1998) Investigation of alkaline hydrolysis of polyethylene terephthalate by differential scanning calorimetry and thermogravimetric analysis. J Appl Polym Sci 70:1939–1945. https://doi.org/10.1002/(SICI)1097-4628(19981205)70:10%3C1939::AID-APP8%3E3.0.CO;2-G CrossRefGoogle Scholar
- 10.Karayannidis GP, Psalida EA (2000) Chain extension of recycled poly(ethylene terephthalate) with 2,2′-(1,4-phenylene)bis(2-oxazoline). J Appl Polym Sci 77:2206–2211. https://doi.org/10.1002/1097-4628(20000906)77:10%3C2206::AID-APP14%3E3.0.CO;2-D CrossRefGoogle Scholar
- 11.Raffa P, Coltelli MB, Savi S, Bianchi S, Castelvetro V (2012) Chain extension and branching of poly(ethylene terephthalate) (PET) with di-multifunctional epoxy or isocyanate additives: an experimental and modelling study. React Funct Polym 72:50–60. https://doi.org/10.1016/j.reactfunctpolym.2011.10.007 CrossRefGoogle Scholar
- 20.Mallon F, Beers K, Ives A, Ray H (1998) The effect of the type of purge gas on the solid-state polymerization of polyethylene terephthalate. J Appl Polym Sci 69:1789–1791. https://doi.org/10.1002/(SICI)1097-4628(19980829)69:9%3C1789::AID-APP13%3E3.0.CO;2-H CrossRefGoogle Scholar