Advertisement

Polymer Bulletin

, Volume 76, Issue 2, pp 539–552 | Cite as

Application of the liquid-phase polymer-based retention technique to the sorption of molybdenum(VI) and vanadium(V)

  • Bernabé L. RivasEmail author
  • Carolina Espinosa
  • Julio Sánchez
Original Paper

Abstract

This research is focused on molybdate and vanadate removal from aqueous solutions by the liquid-phase polymer-based retention (LPR) technique. In this technique, a cationic water-soluble polymer based on the ammonium quaternary group poly(diallyldimethylammonium chloride), PDDA, was used as a polymeric sorbent, and a regenerated cellulose ultrafiltration membrane was used as a filter. The removal of molybdenum and vanadium using the LPR technique was analyzed by both the washing and enrichment methods. The removal experiments using the washing method were conducted by varying the pH, polymer/metal molar ratio, concentration of metal ions, pressure and presence of interfering ions. In addition, the enrichment method was used to determine the maximum retention capacity of PDDA. The obtained results showed the highest retention capacity of molybdate (100%, using 30 mg/L in the feed) for PDDA at pH 3 and 9. The optimum molar ratio was 20:1 polymer/Mo(VI). The efficient vanadate retention (approximately 90%) was obtained at pH 6 with 10:1 polymer/V(V) molar ratio. The effect of metal concentration on the retention showed a higher retention of Mo(VI) independent of its concentrations. In the case of V(V), the maximum retention was reached when 60 mg/L of vanadium was used in the feed. The enrichment method showed the maximum retention capacities of 370 mg Mo(VI)/g PDDA and 520 mg V(V)/g PDDA. The presence of interfering ions did not affect the retention capacity of PDDA. These results showed that the combination of PDDA with ultrafiltration membranes could represent an alternative method for the removal of molybdate and vanadate from water.

Keywords

Molybdenum Polymer Ultrafiltration Vanadium Wastewater 

Notes

Acknowledgements

The authors thank FONDECYT (Grant No 1150510). Julio Sánchez thanks FONDECYT (Grant No 11140324) and DICYT (Grant No 021741SP), and VRIDEI, Universidad de Santiago de Chile.

References

  1. 1.
    Zeng L, Cheng CY (2009) A literature review of the recovery of molybdenum and vanadium from spent hydrodesulphurisation catalysts: part I: metallurgical processes. Hydrometallurgy 98:1–9CrossRefGoogle Scholar
  2. 2.
    Sethi B, Kumar S, Singh R, Gupta VK, Singh LP (2011) Molybdate anion recognition through a cationic crowned ionopore based electrochemical sensor: detection of an environmental pollutant. Int J Environ Sci 6:1361–1372Google Scholar
  3. 3.
    Zhou X, Wei C, Li M, Qiu S, Li X (2011) Thermodynamics of vanadium–sulfur–water systems at 298 K. Hydrometallurgy 106:104–112CrossRefGoogle Scholar
  4. 4.
    WHO (2000) Air quality guidelines for Europe. World Health Organization, Regional Office for Europe, CopenhagenGoogle Scholar
  5. 5.
    Namasivayam C, Sangeetha D (2006) Removal of molybdate from water by adsorption onto ZnCl2 activated coir pith carbon. Bioresour Technol 97:1194–1200CrossRefGoogle Scholar
  6. 6.
    Namasivayam C, Sureshkumar MV (2009) Removal and recovery of molybdenum from aqueous solutions by adsorption onto surfactant-modified coir pith, lignocellulosic polymer. Clean Soil Air Water 37:60–66CrossRefGoogle Scholar
  7. 7.
    Prathap K, Namasivayam E (2010) Adsorption of vanadate(V) on Fe(III)/Cr(III) hydroxide waste. Environ Chem Lett 8:363–371CrossRefGoogle Scholar
  8. 8.
    Wang P, Wilson LL, Wesolowski DJ, Rosenqvist J, Anderko A (2010) Solution chemistry of Mo(III) and Mo(IV): thermodynamic foundation for modeling localized corrosion. Corros Sci 52:1625–1634CrossRefGoogle Scholar
  9. 9.
    Naeem A, Westerhoff P, Mustafa S (2007) Vanadium removal by metal (hydr)oxide adsorbents. Water Res 41:1596–1602CrossRefGoogle Scholar
  10. 10.
    El-Moselhy MM, Senguptab AK, Smith R (2011) Carminic acid modified anion exchanger for the removal and preconcentration of Mo(VI) from waste water. J Hazard Mater 185:442–446CrossRefGoogle Scholar
  11. 11.
    Nguyen TH, Lee MS (2013) Separation of molybdenum and vanadium from acid solutions by ion exchange. Hydrometallurgy 136:65–70CrossRefGoogle Scholar
  12. 12.
    Hu J, Wang X, Xiao L (2009) Removal of vanadium from molybdate solution by ion exchange. Hydrometallurgy 95:203–206CrossRefGoogle Scholar
  13. 13.
    Rivas BL, Pereira E, Palencia M, Sánchez J (2011) Water-soluble functional polymers in conjunction with membranes to remove pollutant ions from aqueous solutions. Prog Polym Sci 36:294–322CrossRefGoogle Scholar
  14. 14.
    Rivas BL, Pereira ED, Moreno-Villoslada I (2003) Water-soluble polymer–metal ion interactions. Prog Polym Sci 28:173–208CrossRefGoogle Scholar
  15. 15.
    Roach JD, Tush D (2008) Equilibrium dialysis and ultrafiltration investigations of perchlorate removal from aqueous solution using poly(diallyldimethylammonium) chloride. Water Res 42:1204–1210CrossRefGoogle Scholar
  16. 16.
    Sánchez J, Rivas BL, Özgöz S, Ötles S, Kabay N, Bryjak M (2016) Ultrafiltration assisted by watersoluble poly(diallyldimethylammonium chloride) for As(V) removal. Polym Bull 73:241–254CrossRefGoogle Scholar
  17. 17.
    Cañizares P, Pérez A, Llanos J, Rubio G (2008) Preliminary design and optimisation of a PEUF process for Cr(VI) removal. Desalination 223:229–237CrossRefGoogle Scholar
  18. 18.
    Morales DV, Rivas BL, González M (2016) Synthesis and characterization of poly([(2-methacryloyloxy) ethyl]) trimethylamonnium chloride) resin with removal properties for vanadium (V) and molybdenum (VI). J Chil Chem Soc 61:3295–3303CrossRefGoogle Scholar
  19. 19.
    Miller FA, Wilkins CH (1952) Infrared spectra and characteristic frequencies of inorganic ions. Anal Chem 24:1253–1294CrossRefGoogle Scholar
  20. 20.
    Sánchez J, Rivas BL (2011) Arsenate retention from aqueous solution by hydrophilic polymers through ultrafiltration membranes. Desalination 270:57–63CrossRefGoogle Scholar
  21. 21.
    Tkac P, Paulenova A (2008) Speciation of molybdenum (VI) in aqueous and organic phases of selected extraction systems. Sep Sci Technol 43:2641–2657CrossRefGoogle Scholar
  22. 22.
    Polowczyk I, Cyganowski P, Urbano B, Rivas BL, Bryjak M, Kabay N (2017) Amberlite IRA-400 and IRA-743 chelating resins for the sorption and recovery of molybdenum(VI) and vanadium(V): equilibrium and kinetic studies. Hydrometallurgy 169:496–507CrossRefGoogle Scholar
  23. 23.
    Anirudhan TS, Radhakrishnan PG (2010) Adsorptive performance of an amine-functionalized poly(hydroxyethylmethacrylate)-grafted tamarind fruit shell for vanadium(V) removal from aqueous solutions. Chem Eng J 165:142–150CrossRefGoogle Scholar
  24. 24.
    Toledo L, Rivas BL, Urbano BF, Sánchez J (2013) Novel N-methyl-D-glucamine-based water-soluble polymer and its potential application in the removal of arsenic. Sep Purif Technol 103:1–7CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Bernabé L. Rivas
    • 1
    Email author
  • Carolina Espinosa
    • 2
  • Julio Sánchez
    • 2
  1. 1.Polymer Department, Faculty of ChemistryUniversity of ConcepciónConcepciónChile
  2. 2.Departamento de Ciencias del Ambiente, Facultad de Química y BiologíaUniversidad de Santiago de Chile, USACHSantiagoChile

Personalised recommendations