Advertisement

Polymer Bulletin

, Volume 76, Issue 1, pp 23–34 | Cite as

Glycolysis of poly(ethylene terephthalate) waste with diethyleneglycol under microwave irradiation and ZnSO4·7H2O catalyst

  • Cuong N. HoangEmail author
  • Thuyen T. N. Le
  • Quy D. HoangEmail author
Original Paper
  • 89 Downloads

Abstract

The glycolysis of poly(ethylene terephthalate) (PET) by diethyleneglycol (DEG) in the presence of acetate catalyst usually produces a dark color product. Various catalysts have been used, but only ZnSO4·7H2O gives a bright yellowish liquid material. In addition, after the reaction the catalyst ZnSO4·7H2O can be separated easily and reused. Under microwave irradiation, the PET glycolysis is more efficient in time, conversion, and color improvement. The reaction mixture was purified by treatment with 20% sodium chloride solution. The structure of the isolated products was confirmed by FTIR, NMR, and HPLC-MS. Condensate of the volatile material from the glycolysis reaction was also isolated and analyzed by GC-MS. The mechanisms of PET degradation by DEG and side product formation were proposed. The transesterification of PET with excess DEG was strongly competed by the degradation of DEG to form dioxane and acetaldehyde as main volatile side products and by ether formation; therefore, the using of excessive DEG was unfavorable for the PET glycolysis.

Keywords

Diethyleneglycol Microwave irradiation Recycled poly(ethylene terephthalate) ZnSO4·7H2O catalyst Glycolysis 

Notes

Acknowledgements

This research is funded by Vietnam National University HoChiMinh City (VNU-HCM) under Grant Number 562-2018-18-02.

References

  1. 1.
    Pardal F, Tersac G (2006) Comparative reactivity of glycols in PET glycolysis. Polym Degrad Stab 9:2567–2578.  https://doi.org/10.1016/j.polymdegradstab.2006.05.016 CrossRefGoogle Scholar
  2. 2.
    Patel MR, Patel JV, Mishra D, Sinha VK (2007) Synthesis and characterization of low volatile content polyurethane dispersion from depolymerised polyethylene terephthalate. J Polym Environ 15:97–105.  https://doi.org/10.1007/s10924-007-0050-y CrossRefGoogle Scholar
  3. 3.
    Cakic SM, Ristic IS, Cincovic MM, Nikolic NC, Ilic OZ, Stojiljkovic DT, Bsimendic JK (2012) Glycolyzed products from PET waste and their application in synthesis of polyurethane dispersions. Prog Org Coat 74:115–124.  https://doi.org/10.1016/j.porgcoat.2011.11.024 CrossRefGoogle Scholar
  4. 4.
    Halacheva N, Novakov P (1995) Preparation of oligoester diols by alcoholytic destruction of poly(ethylene terephthalate). Polymer 36:867–874.  https://doi.org/10.1016/0032-3861(95)93119-7 CrossRefGoogle Scholar
  5. 5.
    Karayannidis GP, Achilias DS, Sideridou ID, Bikiaris DN (2005) Alkyd resins derived from glycolized waste poly(ethylene terephthalate). Eur Polym J 41:201–210.  https://doi.org/10.1016/j.eurpolymj.2004.10.001 CrossRefGoogle Scholar
  6. 6.
    Colomines G, VanderLee A, Robin JJ, Boutevin B (2008) X-ray diffraction of the crystallinity of glycolysates derived from PET. Eur Polym J 44:2874–2885.  https://doi.org/10.1016/j.eurpolymj.2008.07.008 CrossRefGoogle Scholar
  7. 7.
    Essawy HA, Tawfik ME, Elsayed NH (2012) Effect of addition of glycolysis products of poly(ethyleneterephthalate) wastes to urea-formaldehyde resin on its adhesion performance to wood substrates and formaldehyde emission. J Appl Polym Sci 123:2377–2383.  https://doi.org/10.1002/app.34750 CrossRefGoogle Scholar
  8. 8.
    Luo X, Li Y (2014) Synthesis and characterization of polyols and polyurethane foams from PET waste and crude glycerol. J Polym Environ 22:318–328.  https://doi.org/10.1007/s10924-014-0649-8 CrossRefGoogle Scholar
  9. 9.
    Achilias DS, Redhwi HH, Siddiqui MN, Nikolaidis AK, Bikiaris DN, Karayannidis GP (2010) Glycolytic depolymerization of PET waste in a microwave reactor. J Appl Polym Sci 118:3066–3073.  https://doi.org/10.1002/app.32737 CrossRefGoogle Scholar
  10. 10.
    Aiemsa-art C, Phanwiroj P, Potiyaraj P (2011) Thermal and morphological properties of polyurethane foams prepared from microwave-assisted glycolyzed products of PET bottles wastes. Energy Procedia 9:428–434.  https://doi.org/10.1016/j.egypro.2011.09.047 CrossRefGoogle Scholar
  11. 11.
    Roy PK, Mathur R, Kumar D, Rajagopal C (2013) Tertiary recycling of poly(ethylene terephthalate) wastes for production of polyurethane–polyisocyanurate foams. J Environ Chem Eng 1:1062–1069.  https://doi.org/10.1016/j.jece.2013.08.019 CrossRefGoogle Scholar
  12. 12.
    Zhang W, Shi X, Zhang X, Han C, Zhang D (2012) PET depolymerization catalyzed by sulfates under microwave irradiation. Adv Mat Res 550–553:792–797.  https://doi.org/10.4028/www.scientific.net/AMR.550-553.792 Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Polymer ChemistryUniversity of Science, VNU-HCMHoChiMinh CityVietnam
  2. 2.Department of Polymer and Composite MaterialsUniversity of Science, VNU-HCMHoChiMinh CityVietnam

Personalised recommendations