Synthesis and characterization of poly(thiophene-co-pyrrole) conducting copolymer nanoparticles via chemical oxidative polymerization
- 200 Downloads
Thiophene and pyrrole copolymer was synthesized by chemical oxidation in the presence of anhydrous FeCl3 in acetonitrile at 0 °C. Characterizations of the obtained copolymers were performed by cyclic voltammetry (CV), UV–Vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). By using chemical oxidative method and based on the results, the copolymer (P(Th-co-Py)) formation was confirmed without any traces for the homopolymers formation. At the undoped state of the copolymer, the π–π* transition absorption peak was located at 629 nm and the optical band gap (Eg) was calculated as 1.97 eV. The effect of the copolymerization time and the comonomers molar ratio on the chemical and physical properties of the P(Th-co-Py) was investigated. The optimum time for copolymerization was evaluated as 6 h and mass specific capacitance (Cms) for P(Th-co-Py) with comonomer ratio of 60Th/40Py was obtained to be 73.7 F/g, falling in the range of supercapacitance.
KeywordsConducting polymers Copolymerization Polypyrrole Polythiophene
The authors wish acknowledge Iran Nanotechnology Initiative Council for their partial financial support through the Contract Number: 47062.
- 2.Camaioni N, Tinti F, Franco L, Fabris M, Toffoletti A, Ruzzi M, Montanari L, Bonoldi L, Pellegrino A, Calabrese A (2012) Effect of residual catalyst on solar cells made of a fluorene-thiophene-benzothiadiazole copolymer as electron-donor: a combined electrical and photophysical study. Org Electron 13:550–559. https://doi.org/10.1016/j.orgel.2011.12.005 CrossRefGoogle Scholar
- 6.Cakmakci I, Duran B, Bereket G (2013) Influence of electrochemically prepared poly(pyrrole-co-N-methyl pyrrole) and poly(pyrrole)/poly(N-methyl pyrrole) composites on corrosion behavior of copper in acidic medium. Prog Org Coat 76:70–77. https://doi.org/10.1016/j.porgcoat.2012.08.015 CrossRefGoogle Scholar
- 18.Foroutani K, Pourabbas B, Sharif M, Fallahian M, Khademi S, Mohammadizadeh M (2014) In situ deposition of polythiophene nano particles on flexible transparent films: effect of the process conditions. Mater Sci Semicond Process 19:57–65. https://doi.org/10.1016/j.mssp.2013.11.012 CrossRefGoogle Scholar
- 23.Yue R, Chen S, Liu C, Lu B, Xu J, Wang J, Liu G (2012) Synthesis, characterization, and thermoelectric properties of a conducting copolymer of 1, 12-bis (carbazolyl) dodecane and thieno[3, 2-b]thiophene. J Solid State Electrochem 16:117–126. https://doi.org/10.1007/s10008-011-1292-0 CrossRefGoogle Scholar
- 24.Basavaraja C, Kim NR, Jo EA, Pierson R, Huh DS, Venkataraman A (2009) Transport properties of polypyrrole films doped with sulphonic acids. Bull Korean Chem Soc 30:2702–2706Google Scholar
- 26.Berson S, Cecioni S, Billon M, Kervella Y, Bettignies RD, Bailly SV, Guillerez SP (2010) Effect of carbonitrile and hexyloxy substituents on alternated copolymer of polythiophene-Performances in photovoltaic cells. Sol Energy Mater Sol Cells 94:699–708. https://doi.org/10.1016/j.solmat.2009.12.028 CrossRefGoogle Scholar
- 27.Wallace GG, Spinks GM, Kane-Maguire LAP, Teasdale PR (2009) Conductive electriactive polymers, 3rd edn. Taylor & Francis Group, Milton Park, Abingdon-on-Thames, Oxfordshire United Kingdom, pp 13–14Google Scholar