Polymer Bulletin

, Volume 71, Issue 12, pp 3177–3196 | Cite as

Preparation of polymer brushes via growth of single crystals of poly(ethylene glycol)-block-polystyrene diblock copolymers synthesized by ATRP and studying the crystal lateral size and brush tethering density

Original Paper
First Online:
Received:
Revised:
Accepted:

Abstract

Well-defined block copolymers of poly(ethylene glycol)-block-polystyrene (PEG-b-PS) were synthesized by atom transfer radical polymerization with predetermined molecular weights and narrow molecular weight distributions (1.06–1.08). The single crystals of PEG-b-PS copolymers were grown in chlorobenzene/octane mixed theta solvent using self-seeding technique. The effect of self-seeding temperature (T s) on single crystal lateral size was evaluated. The atomic force microscopy (AFM) height images were indicative of increasing the single crystal lateral sizes, which were of several microns, via elevating T s. The non-ideal structures were increasing by moving away from the optimized T s (41.5 °C). Here, we studied the transition point between non-interaction and interaction regimes in a mixed theta solvent for PS as well. The impact of the PS block hindrance and the influence of crystallization temperature on thickness, tethering density and reduced tethering density of PS brushes were also investigated. Although these factors did not have the same effect on thickness and tethering density, the trend of their influence on reduced tethering density was the same. The results were recognized by AFM, transmission electron microscopy and small angle X-ray scattering.

Keywords

PEG-b-PS ATRP Single crystal Self-seeding Reduced tethering density 
This is a preview of subscription content, log in to check access.

Notes

Acknowledgments

We would like to extend our sincere gratitude to Prof. Ali Akbar Entezami and Dr. Marzieh Fathi who sympathetically helped us in synthesizing the materials. Our especial thanks also go to Morteza Nasiri for his invaluable discussions on kinetic study.

Supplementary material

289_2014_1244_MOESM1_ESM.docx (28 kb)
Supplementary material 1 (DOCX 27 kb)

References

  1. 1.
    Kind H, Yan H, Messer B, Law M, Yang P (2002) Nanowire ultraviolet photodetectors and optical switches. Adv Mater 14:158–160CrossRefGoogle Scholar
  2. 2.
    Rosario R, Gust D, Hayes M, Jahnke F, Springer J, Garsia AA (2002) Photon-modulated wettability changes on spiropyran-coated surfaces. Langmuir 18:8062–8069CrossRefGoogle Scholar
  3. 3.
    Lahann J, Mitragotri S, Tran TN, Kaido H, Sundaram J, Choi IS, Hoffer S, Somorjal GA, Langer R (2003) Reversible switching of surfaces. Science 299:371–374CrossRefGoogle Scholar
  4. 4.
    Russel TP (2002) Surface-responsive materials. Science 297:964–967CrossRefGoogle Scholar
  5. 5.
    Yoshida R, Sakai K, Okano T, Sakurai Y, Bae YH, Kim SW (1991) Surface-modulated skin layers of thermally responsive hydrogels as on-off switches. J Biomater Sci Polym Ed 3:155–162CrossRefGoogle Scholar
  6. 6.
    Alexander S (1977) Adsorption of chain molecules with a polar head a scaling description. J Phys (Paris) 38:983–987CrossRefGoogle Scholar
  7. 7.
    de Gennes PG (1980) Conformations of polymers attached to an interface. Macromolecules 13:1069–1075CrossRefGoogle Scholar
  8. 8.
    Brochard-Wyart F, de Gennes PG (1996) Adhesion between rubbers and grafted solids. J Adhes 57:21–30CrossRefGoogle Scholar
  9. 9.
    Ligoure C (1996) Adhesion between a polymer brush and an elastomer: A self-consistent mean field model. Macromolecules 29:5459–5468CrossRefGoogle Scholar
  10. 10.
    Klein J, Perahia D, Warburg S (1991) Forces between polymer-bearing surface undergoing shear. Nature 352:143–145CrossRefGoogle Scholar
  11. 11.
    Gupta SA, Cochran HD, Cummings PT (1997) Shear behavior of squalane and tetracosane under extreme confinement. I. Model, simulation method, and interfacial slip. J Chem Phys 107:10316–10326CrossRefGoogle Scholar
  12. 12.
    Ohsedo Y, Takashina R, Gong JP, Osada Y (2004) Surface friction of hydrogels with well-defined polyelectrolyte brushes. Langmuir 20:6549–6555CrossRefGoogle Scholar
  13. 13.
    Martin JI, Wang ZG, Shick M (1996) Effects of polymer brush self-assembly on spreading and thin film stability. Langmuir 12:4950–4959CrossRefGoogle Scholar
  14. 14.
    Reiter G, Auroy P, Auvray L (1996) Instabilities of thin polymer films on layers of chemically identical grafted molecules. Macromolecules 29:2150–2157CrossRefGoogle Scholar
  15. 15.
    Van der Waarden M (1950) Stabilization of carbon-black dispersions in hydrocarbons. J Colloid Sci 5:317–325CrossRefGoogle Scholar
  16. 16.
    Napper DH (1983) Polymeric stabilization of colloid dispersions. Academic Press, New YorkGoogle Scholar
  17. 17.
    Halperin A (1999) Polymer brushes that resist adsorption of model proteins: design parameters. Langmuir 15:2525–2533CrossRefGoogle Scholar
  18. 18.
    Lee H, Lee HB, Andrade JD (1995) Blood compatibility of polyethylene oxide surfaces. Prog Polym Sci 20:1043–1079CrossRefGoogle Scholar
  19. 19.
    Ito Y, Park YS, Imanishi Y (1997) Visualization of critical pH-controlled gating of a porous membrane grafted with polyelectrolyte brushes. J Am Chem Soc 119:2739–2740CrossRefGoogle Scholar
  20. 20.
    Taunton HJ, Toprakcioglu C, Fetters LJ, Klein J (1988) Forces between surfaces bearing terminally anchored polymer chains in good solvents. Nature (London) 332:712–713CrossRefGoogle Scholar
  21. 21.
    Granick S, Herz J (1985) Surface pressure from block copolymers with one block forming a monolayer and the other block dangling into solution. Macromolecules 18:460–465CrossRefGoogle Scholar
  22. 22.
    Kent MS, Lee LT, Farnoux B, Rondelez F (1992) Characterization of diblock copolymer monolayers at the liquid-air interface by neutron reflectivity and surface tension measurements. Macromolecules 25:6240–6247CrossRefGoogle Scholar
  23. 23.
    Bhushan B, Israelachvili JN, Landman U (1995) Nanotribology: friction, wear and lubrication at the atomic scale. Nature (London) 374:607–616CrossRefGoogle Scholar
  24. 24.
    Milner ST (1991) Polymer brushes. Science 251:905–914CrossRefGoogle Scholar
  25. 25.
    Halperin A, Tirrell M, Lodge TP (1992) Tethered chains in polymer microstructures. Adv Polym Sci 100:31–37CrossRefGoogle Scholar
  26. 26.
    Zhao B, Brittan WJ (2000) Polymer Brushes: Surface-immobilized macromolecules. Prog Polym Sci 25:677–710CrossRefGoogle Scholar
  27. 27.
    Mansky P, Liu Y, Huang E, Russel TP, Hawker CJ (1997) Controlling polymer-surface interactions with random copolymer brushes. Science 275:1458–1460CrossRefGoogle Scholar
  28. 28.
    Ito Y, Ochiai Y, Park YS, Imanishi Y (1997) pH-sensitive gating by conformational change of a polypeptide brush grafted onto a porous polymer membrane. Am J.Chem Soc 119:1619–1623CrossRefGoogle Scholar
  29. 29.
    Kent MS (2000) A quantitative study of tethered chains in various solution conditions using Langmuir diblock copolymer monolayers. Macromol Rapid Commun 21:243–270CrossRefGoogle Scholar
  30. 30.
    Chen WY, Zheng JX, Cheng SZD, Li CY, Huang P, Zhu L, Xiong H, Ge Q, Guo Y, Quirk RP, Lotz B, Deng L, Wu C, Thomas EL (2004) Onset of tethered chain overcrowding. Phys Rev Lett 93(1–4):028301Google Scholar
  31. 31.
    Zheng JX, Xiong H, Chen WY, Lee K, Van Horn RM, Quirk RP, Lotz B, Thomas EL, Shi A-C, Cheng SZD (2006) Onsets of tethered chain overcrowding and highly stretched brush regime via crystalline amorphous diblock copolymers. Macromolecules 39:641–650CrossRefGoogle Scholar
  32. 32.
    Wu T, Efimenko K, Genzer J (2002) Combinatorial study of the mushroom-to-brush crossover in surface anchored polyacrylamide. J Am Chem Soc 124:9394–9395CrossRefGoogle Scholar
  33. 33.
    Lotz B, Kovacs AJ (1966) Propriétés des copolymères biséquencés polyoxyéthylène–polystyrène. Colloid Polym Sci 209:97–114Google Scholar
  34. 34.
    Chen WY, Li CY, Zheng JX, Huang P, Zhu L, Ge Q, Quirk RP, Lotz B, Deng L, Wu C, Thomas EL, Cheng SZD (2004) Chemically shielded poly(ethylene oxide) single crystal growth and construction of channel-wire arrays with chemical and geometric recognitions on a submicrometer scale. Macromolecules 37:5292–5299CrossRefGoogle Scholar
  35. 35.
    Keller A (1957) A note on single crystals in polymers: evidence for a folded chain configuration. Philos Mag 2:1171–1175CrossRefGoogle Scholar
  36. 36.
    Lotz B, Kovacs AJ, Bassett GA, Keller A (1966) Properties of copolymers composed of one poly-ethylene-oxide and one polystyrene block. Colloid Polym Sci 209:115–128Google Scholar
  37. 37.
    Minemawari H, Yamada T, Matsui H, Tsutsumi J, Haas S, Chiba R, Kumai R, Hasegawa T (2011) Inkjet printing of single-crystal films. Nature 475:364–367CrossRefGoogle Scholar
  38. 38.
    Jiang X, Liu X, Liao Q, Wang X, Yan DD, Huo H, Li L, Zhou JJ (2014) Probing interfacial properties using a poly(ethylene oxide) single crystal. Soft Matter 10:3238–3244CrossRefGoogle Scholar
  39. 39.
    Reiter G (2014) Some unique features of polymer crystallization. Chem Soc Rev 43:2055–2065CrossRefGoogle Scholar
  40. 40.
    Dou L, Zheng Y, Shen X, Wu G, Fields K, Hsu WC, Zhou H, Yang Y, Wudl F (2014) Single-crystal linear polymers through visible light-triggered topochemical quantitative polymerization. Science 343:272–277Google Scholar
  41. 41.
    Abbaspoor S, Abbasi F, Agbolaghi S (2014) A novel approach to prepare polymer mixed-brushes via single crystal surface patterning. RSC Adv 4(33):17071–17082CrossRefGoogle Scholar
  42. 42.
    Agbolaghi S, Abbasi F, Abbaspoor S (2014) Epitaxial single crystal surface patterning and study of physical and chemical environmental effects on crystal growth. Colloid Polym Sci 292:1375–1383CrossRefGoogle Scholar
  43. 43.
    Agbolaghi S, Alizadeh-Osgouei M, Abbaspoor S, Abbasi F (2014) Self-assembling nano mixed-brushes having co-continuous surface morphology by melt growing single crystals and comparison with solution patterned leopard-skin surface morphology, RSC Advances (submitted)Google Scholar
  44. 44.
    Agbolaghi S, Abbasi F, Jalili K (2014) Nascent lateral habits of solution crystallization of poly(ethylene glycol)-block-polystyrene diblock copolymers. J Polym Res 21(380):1–11Google Scholar
  45. 45.
    Jankova K, Chen XY, Kops J, Batsberg W (1999) Controlled/living ATRP of styrene in the synthesis of amphiphilic diblock copolymers from a poly(ethylene glycol) macroinitiator. Polym Bull 42:153–158CrossRefGoogle Scholar
  46. 46.
    Wunderlich B (1980) Macromolecular Physics. Academic Press, New YorkGoogle Scholar
  47. 47.
    Hamie H (2010) Morphology and thermal behavior of single crystals of polystyrene-poly(ethylene oxide) block copolymers. Ph.D. dissertation, University of Haute AlsaceGoogle Scholar
  48. 48.
    Baltá Calleja FJ, Keller A (1964) On the relation between long spacings, molecular length, and orientation in long chain compounds with reference to the possibility of chain folding. Part II. Poly(ethylene oxide)s. J Polym Sci A 2:2171–2179Google Scholar
  49. 49.
    Baltá Calleja FJ, Hay IL, Keller A (1966), Diffraction effects in single crystals and spherulites of poly(ethylene oxide). Colloid Polym Sci 209:128–135Google Scholar
  50. 50.
    Chen J, Cheng SZD, Wu SS, Lotz B, Wittmann JC (1995) Polymer decoration study in chain folding behavior of solution-grown poly(ethylene oxide) crystals. J Polym Sci Polym Phys Ed 33:1851–1855Google Scholar
  51. 51.
    Takahashi Y, Tadokoro H (1973) Structural studies of polyethers (–(CH2)m-O-)n. X. Crystal structure of poly(ethylene oxide). Macromolecules 6:672–675CrossRefGoogle Scholar
  52. 52.
    Zhu L, Cheng SZD, Calhoun BH, Ge Q, Quirk RP, Thomas EL, Hsiao BS, Yeh F, Lotz B (2000) Crystallization temperature-dependent crystal orientations within nanoscale confined lamellae of a self-assembled crystalline—amorphous diblock copolymer. Am Chem Soc 122:5957–5967CrossRefGoogle Scholar
  53. 53.
    Zhu L, Mimnaugh BR, Ge Q, Quirk RP, Cheng SZD, Thomas EL, Lotz B, Hsiao BS, Yeh F, Liu LZ (2001) Hard and soft confinement effects on polymer crystallization in microphase separated cylinder-forming PEO-b-PS/PS blends. Polymer 42:9121–9131CrossRefGoogle Scholar
  54. 54.
    Zhu L, Chen Y, Zhang A, Calhoun BH, Chun M, Quirk RP, Cheng SZD, Hsiao BS, Yeh F, Hashimoto T (1999) Phase structures and morphologies determined by competitions among self-organization, crystallization, and vitrification in a disordered poly(ethylene-b-polystyrene diblock copolymer. Phys Rev B 60:10022–10031CrossRefGoogle Scholar
  55. 55.
    Huang P, Zhu L, Cheng SZD, Ge Q, Quirk RP, Thomas EL, Lotz B, Hsiao BS, Liu L, Yeh F (2001) Crystal orientation changes in two-dimensionally confined nanocylinders in a poly(ethylene oxide)-b-polystyrene/polystyrene blend. Macromolecules 34:6649–6657CrossRefGoogle Scholar
  56. 56.
    Keller A, O’Connor A (1958) Study of single crystals and their associations in polymers. Disc Faraday Soc 25:114–121CrossRefGoogle Scholar
  57. 57.
    Wunderlich B (1973) Macromolecular physics, crystal structure, morphology, defects, vol 1. Academic, New YorkGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2014

Authors and Affiliations

  1. 1.Institute of Polymeric MaterialsSahand University of TechnologyTabrizIran
  2. 2.Faculty of Polymer EngineeringSahand University of TechnologyTabrizIran

Personalised recommendations