Polymer Bulletin

, Volume 67, Issue 4, pp 623–629 | Cite as

Synthesis and characterization of polymeric ionic liquid poly(imidazolium chloride-1,3-diylbutane-1,4-diyl)

Original Paper

Abstract

Polymeric ionic liquid poly(imidazolium chloride-1,3-diylbutane-1,4-diyl) with imidazolium cation groups built into the main chain was prepared using two different routes in 92–95% yield, and characterized by FT-IR, 1H, 13C NMR, TGA, and elemental analysis. The first method involved the heating of neat 1-(4-chlorobutyl)-1H-imidazole, whereas the second method involved the heating of an equimolar mixture of 1,1′-(1,4-butanediyl)-bis-imidazole and 1,4-dichlorobutane.

Keywords

Ionic liquid polymer Imidazolium cation Addition polymerization 

Notes

Acknowledgments

Authors would like to thank Center for Environmentally Beneficial Catalysis (CEBC)—University of Kansas, American Chemical Society-PRF grant UR1-49436 and NSF grant CBET-0929970 for financial support. NMR Spectrometer used in this study was obtained through a NSF MRI grant CHE-0421290.

References

  1. 1.
    Brennecke JF, Rogers RD, Seddon KR (2007) Ionic liquids IV: not just solvents anymore. Oxford University Press, USACrossRefGoogle Scholar
  2. 2.
    Wasserscheid P, Welton T (2008) Ionic liquids in synthesis. Wiley-VCH, WeinheimGoogle Scholar
  3. 3.
    Welton T (1999) Room-temperature ionic liquids. Solvents for synthesis and catalysis. Chem Rev 99:2071–2084CrossRefGoogle Scholar
  4. 4.
    Lee SG (2006) Functionalized imidazolium salts for task-specific ionic liquids and their applications. Chem Commun 10:1049–1063CrossRefGoogle Scholar
  5. 5.
    Plechkova NV, Seddon KR (2008) Applications of ionic liquids in the chemical industry. Chem Soc Rev 37:123–150CrossRefGoogle Scholar
  6. 6.
    Zhao H, Malhotra SV (2002) Applications of ionic liquids in organic synthesis. Aldrichim Acta 35:75–83CrossRefGoogle Scholar
  7. 7.
    Ricks-Laskoski HL, Snow AW (2006) Synthesis and electric field actuation of an ionic liquid polymer. J Am Chem Soc 128:12402–12403CrossRefGoogle Scholar
  8. 8.
    Hsieh Y-N, Ho W-Y, Horng RS, Huang P-C, Hsu C-Y, Huangand H-H, Kuei C-H (2007) Study of anion effects on separation phenomenon for the vinyloctyl imidazolium based ionic liquid polymer stationary phases in GC. Chromatographia 66:607–611CrossRefGoogle Scholar
  9. 9.
    Hu X, Huang J, Zhang W, Li M, Tao C, Li G (2008) Photonic ionic liquids polymer for naked-eye detection of anions. Adv Mater 20:4074–4078CrossRefGoogle Scholar
  10. 10.
    Sato T, Marukane S, Narutomi T, Akao T (2007) High rate performance of a lithium polymer battery using a novel ionic liquid polymer composite. J Power Sources 164:390–396CrossRefGoogle Scholar
  11. 11.
    Zhang Y, Chen X, Lan J, You J, Chen L (2009) Synthesis and biological applications of imidazolium-based polymerized ionic liquid as a gene delivery vector. Chem Biol Drug Des 74:282–288CrossRefGoogle Scholar
  12. 12.
    Bara JE, Lessmann S, Gabriel CJ, Hatakeyama ES, Nobel RD, Gin DG (2007) Synthesis and performance of polymerizable room-temperature ionic liquids as gas separation membranes. Ind Eng Chem Res 46:5397–5404CrossRefGoogle Scholar
  13. 13.
    Chen H, Choi J-H, Cruz DS, Winey KI, Elabd YA (2009) Polymerized ionic liquids: the effect of random copolymer composition on ion conduction. Macromolecules 42:4809–4816CrossRefGoogle Scholar
  14. 14.
    Chen H, Elabd YA (2009) Polymerized ionic liquids: solution properties and electrospinning. Macromolecules 42:3368–3373CrossRefGoogle Scholar
  15. 15.
    Freitas FS, de Freitas JN, Ito BI, De Paoli MA, Nogueira AF (2009) Electrochemical and structural characterization of polymer gel electrolytes based on a PEO copolymer and an imidazolium-based ionic liquid for dye-sensitized solar cells. ACS Appl Mater Interfaces 1:2870–2877CrossRefGoogle Scholar
  16. 16.
    Amarasekara AS, Owereh OS (2009) Hydrolysis and decomposition of cellulose in Brönsted acidic ionic liquids under mild conditions. Ind Eng Chem Res 48:10152–10155CrossRefGoogle Scholar
  17. 17.
    Amarasekara AS, Owereh OS (2009) Homogeneous phase synthesis of cellulose carbamate silica hybrid materials using 1-n-butyl-3-methylimidazolium chloride ionic liquid medium. Carbohydr Polym 78:635–638CrossRefGoogle Scholar
  18. 18.
    Amarasekara AS, Owereh OS (2010) Synthesis of a sulfonic acid functionalized acidic ionic liquid modified silica catalyst and applications in the hydrolysis of cellulose. Catal Commun 11:1072–1075CrossRefGoogle Scholar
  19. 19.
    Varma RS, Namboodiri VV (2001) Solvent-free preparation of ionic liquids using a household microwave oven. Pure Appl Chem 73:1309–1313CrossRefGoogle Scholar
  20. 20.
    Oonishi H, Igarashi A, Morimoto K (1996) Preparation of N-[(imidazolyl- or imidazo[1,5-a]pyridyl)phenylalkyl]phenylsulfonamide derivatives as antagonists of thromboxane A2 and prostaglandin H2. Jpn Patent 19960528Google Scholar
  21. 21.
    Liu F, Cui X, Yu S, Li Z, Ge X (2009) Hydrolysis reaction of poly(ethylene terephthalate) using ionic liquids as solvent and catalyst. J Appl Polym Sci 114:3561–3565CrossRefGoogle Scholar
  22. 22.
    Huddleston JG, Visser AE, Reichert WM, Willauer HD, Broker GA, Rogers RD (2001) Characterization and comparison of hydrophilic and hydrophobic room temperature ionic liquids incorporating the imidazolium cation. Green Chem 3:156–164CrossRefGoogle Scholar
  23. 23.
    Ma J-F, Yang J, Zheng G-L, Li L, Zhang Y-M, Li F-F, Liu J-F (2004) Four new coordination polymers of Cu(II) with 1, 10-(1,4-butanediyl)bis(imidazole). Polyhedron 23:553–559CrossRefGoogle Scholar

Copyright information

© Springer-Verlag 2010

Authors and Affiliations

  1. 1.Department of ChemistryPrairie View A&M UniversityPrairie ViewUSA

Personalised recommendations