Advertisement

Clinical Application of Three-Dimensionally Printed Biomaterial Polycaprolactone (PCL) in Augmentation Rhinoplasty

  • Young Jin ParkEmail author
  • Jong Hyun Cha
  • Sa Ik Bang
  • So Young KimEmail author
Original Article Rhinoplasty
  • 105 Downloads

Abstract

Background

This clinical study aimed to investigate the safety and surgical outcome of three-dimensionally (3D) fabricated polycaprolactone (PCL) mesh in rhinoplasty. In particular, this study explored how a 3D-printed PCL mesh performs as a bioabsorbable scaffold after a long period following implantation.

Methods

A retrospective review of 101 patients who received primary or secondary rhinoplasty with a PCL mesh was performed. Patient demographics and surgery-related outcomes were examined. Clinical efficacy and safety were evaluated using the Global Aesthetic Improvement Scale at postoperative 18 months. From two revisional cases, a biopsy specimen of implanted PCL was acquired and histopathological analysis was performed.

Results

Of all the patients, 98.0% showed no postoperative infection-related foreign body reaction or distinct abnormal reaction, and the implants were observed to maintain long-term efficacy until 18-month follow-up. In patients who received spreader grafts, significant differences between preoperative and postoperative Cottle sign scores were found. Histopathological analysis showed features of adjacent tissue infiltration into pores of the PCL mesh and regeneration of neo-cartilaginous tissue and collagen around the mesh 20 months after implantation.

Conclusion

This study demonstrates that a novel biodegradable PCL mesh with a 3D structure is a safe and effective material for corrective rhinoplasty because it is easy to use and capable of maintaining its volume in the long term without foreign body response. This biocompatible material will have a wide range of applications as the most suitable alternative to nonabsorbable materials in rhinoplasty and reconstruction surgeries, such as fashioning spreader grafts and septal extension grafts.

Level of Evidence IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Keywords

Rhinoplasty Alloplastic implant 3D PCL mesh 

Notes

Acknowledgment

None of the authors has a financial interest in any of the products, devices, or drugs mentioned in this manuscript.

Supplementary material

Supplemental Video 1. Surgical implantation technique using PCL mesh for a spreader graft, septal extension graft and columellar strut. (MP4 74936 kb)

References

  1. 1.
    Jin HR, Lee JY, Shin SO, Choi YS, Lee DW (2006) Key maneuvers for successful correction of a deviated nose in Asians. Am J Rhinol 20:609–614CrossRefGoogle Scholar
  2. 2.
    Sajjadian A, Naghshineh N, Rubinstein R (2010) Current status of grafts and implants in rhinoplasty: part II. Homologous grafts and allogenic implants. Plast Reconstr Surg 125:99e–109eCrossRefGoogle Scholar
  3. 3.
    Kim HS, Park SS, Kim MH, Kim MS, Kim SK, Lee KC (2014) Problems associated with alloplastic materials in rhinoplasty. Yonsei Med J 55:1617–1623CrossRefGoogle Scholar
  4. 4.
    Woodruff MA, Hutmacher DW (2010) The return of a forgotten polymer—polycaprolactone in the 21st century. Prog Polym Sci 35:1217–1256CrossRefGoogle Scholar
  5. 5.
    Park SH, Yun BG, Won JY et al (2017) New application of three-dimensional printing biomaterial in nasal reconstruction. Laryngoscope 127:1036–1043CrossRefGoogle Scholar
  6. 6.
    Kim YS, Shin YS, Park DY et al (2015) Application of three-dimensional printing in animal model of augmentation rhinoplasty. Ann Biomed Eng 43:2153–2162CrossRefGoogle Scholar
  7. 7.
    Shim JH, Jeong JH, Won JY et al (2017) Porosity effect of 3D-printed polycaprolactone membranes on calvarial defect model for guided bone regeneration. Biomed Mater. 13:015014CrossRefGoogle Scholar
  8. 8.
    Stal S, Hollier L (2000) The use of resorbable spacers for nasal spreader grafts. Plast Reconstr Surg 106:922–928 (discussion 929–931) CrossRefGoogle Scholar
  9. 9.
    Rhoda S, William P, Lisa M et al (2010) Improvement in nasolabial folds with a hyaluronic acid filler using a cohesive polydensified matrix technology: results from an 18-month open-label extension trial. Dermatol Surg 36:1800–1808CrossRefGoogle Scholar
  10. 10.
    Park CH, Kim IW, Hong SM, Lee JH (2009) Revision rhinoplasty of Asian noses: analysis and treatment. Arch Otolaryngol Head Neck Surg 135:146–155CrossRefGoogle Scholar
  11. 11.
    Park JH, Jin HR (2012) Use of autologous costal cartilage in Asian rhinoplasty. Plast Reconstr Surg 130:1338–1348CrossRefGoogle Scholar
  12. 12.
    Caughlin BP, Been MJ, Rashan AR, Toriumi DM (2015) The effect of polydioxanone absorbable plates in septorhinoplasty for stabilizing caudal septal extension grafts. JAMA Facial Plast Surg 17:120–125CrossRefGoogle Scholar
  13. 13.
    Boenisch M, Mink A (2000) Clinical and histological results of septoplasty with a resorbable implant. Arch Otolaryngol Head Neck Surg 126:1373–1377CrossRefGoogle Scholar
  14. 14.
    Chen CC, Chueh JY, Tseng H, Huang HM, Lee SY (2003) Preparation and characterization of biodegradable PLA polymeric blends. Biomaterials 24:1167–1173CrossRefGoogle Scholar
  15. 15.
    Eppley BL, Reilly M (1997) Degradation characteristics of PLLA-PGA bone fixation devices. J Craniofac Surg 8:116–120CrossRefGoogle Scholar
  16. 16.
    Schantz JT, Teoh SH, Lim TC, Endres M, Lam CX, Hutmacher DW (2003) Repair of calvarial defects with customized tissue-engineered bone grafts I. Evaluation of osteogenesis in a three-dimensional culture system. Tissue Eng 9(Suppl 1):S113–S126CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature and International Society of Aesthetic Plastic Surgery 2018

Authors and Affiliations

  1. 1.Kangnam-Samsung Aesthetic Plastic SurgerySeoulSouth Korea
  2. 2.Department of Plastic Surgery, Samsung Medical CenterSungkyunkwan University School of MedicineSeoulSouth Korea
  3. 3.Department of Plastic and Reconstructive Surgery, Inje University Sanggye Paik HospitalInje University School of MedicineSeoulSouth Korea

Personalised recommendations