Springer Nature is making SARS-CoV-2 and COVID-19 research free. View research | View latest news | Sign up for updates

Molecularly imprinted polymers for cleanup and selective extraction of curcuminoids in medicinal herbal extracts

Abstract

This paper describes the synthesis of novel molecularly imprinted polymers (MIPs), prepared by a noncovalent imprinting approach, for cleanup and preconcentration of curcumin (CUR) and bisdemethoxycurcumin (BDMC) from medicinal herbal extracts and further analysis by high-performance liquid chromatography with fluorescence detection (HPLC-FLD). Two molecular mimics, a mixture of reduced BDMCs and 4-(4-hydroxyphenyl)-2-butanone (HPB), have been synthesized and applied as templates for MIP synthesis. The polymers were prepared using N-(2-aminoethyl) methacrylamide (EAMA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as the cross-linker (in a 1:5 molar ratio), and a mixture of acetonitrile/dimethylsulfoxide (90 %, v/v) as porogen. MIPs prepared using a mixture of reduced BDMCs as template showed higher selectivity for CUR and BDMC than those obtained with HPB, with imprinting factors of 3.5 and 2.7 for CUR and BDMC, respectively, using H2O/acetonitrile (65:35, v/v) as mobile phase. The adsorption isotherms for CUR in the MIP and the nonimprinted polymer (NIP) were fitted to the Freundlich isotherm model, and the calculated average binding affinities for CUR were (17 ± 2) and (8 ± 1) mM−1 for the MIP and the NIP, respectively. The polymers were packed into solid-phase extraction (SPE) cartridges, and the optimized molecularly imprinted solid-phase extraction (MISPE-HPLC) with fluorescence detection (FLD) method allowed the extraction of both curcuminoids from aqueous samples (50 mM NH4Ac, pH 8.8) followed by a selective washing with acetonitrile/NH4Ac, 50 mM at pH 8.8 (30:70 %, v/v), and elution with 3 × 1 mL of MeOH. Good recoveries and precision ranging between 87 and 92 %, with relative standard deviation (RSD) of <5.3 % (n = 3), were obtained after the preconcentration of 10-mL solutions containing both CUR and BDMC at concentrations in the range of 0–500 μg L−1. The optimized method has been applied to the analysis of both curcuminoids in medicinal herbal extracts.

This is a preview of subscription content, log in to check access.

Fig. 1
Fig. 2
Fig. 3
Fig. 4

References

  1. 1.

    Jayaprakasha GK, Jaganmohan LR, Sakariah KK (2006) Antioxidant activities of curcumin, demethoxycurcumin and bisdemethoxycurcumin. Food Chem 98:720–724

  2. 2.

    Pandey KB, Rizvi SI (2009) Plant polyphenols as dietary antioxidants in human health and disease. Oxid Med Cell Longev 2:270–278

  3. 3.

    Hwan LJ, Myoung-Gun C (2011) Determination of curcuminoid colouring principles in commercial foods by HPLC. Food Chem 124:1217–1222

  4. 4.

    Priyadarsini KI, Maity DK, Naik GH, Kumar MS, Unnikrishnan MK, Satav JG, Mohan H (2003) Role of phenolic OH and methylene hydrogen on the free radical reactions and antioxidant activity of curcumin. Radic Biol Med 35:475–484

  5. 5.

    Pana MH, Ho CT (2008) Chemopreventive effects of natural dietary compounds on cancer development. Chem Soc Rev 37:2558–2574

  6. 6.

    Baliga MS, Joseph N, Venkataranganna MV, Saxena A, Ponemoned V, Fayad R (2012) Curcumin, an active component of turmeric in the prevention and treatment of ulcerative colitis: preclinical and clinical observations. Food Funct 3:1109–1117

  7. 7.

    Regulation (EC) 1333/2008 of the European Parliament and of the Council (2008) On food additives. Off J Eur Union L 354:16–33

  8. 8.

    http://www.fao.org/food/food-safety-quality/scientific-advice/jecfa/jecfa-additives/en/ (Accessed 26 Dec 2013)

  9. 9.

    Mahattanadul S, Nakamura T, Panichayupakaranant P, Phdoongsombut N, Tungsinmunkong K, Booking P (2009) Comparative antiulcer effect of bisdemethoxycurcumin and curcumin in a gastric ulcer model system. Phytomed 16:342–351

  10. 10.

    Thongcai W, Liawruangrath B, Liawruangrath S (2009) Flow injection analysis of total curcuminoids in turmeric and total antioxidant capacity using 2,2′-diphenyl-1-picrylhydrazyl assay. Food Chem 112:494–499

  11. 11.

    Anand P, Thomas SG, Kunnumakkara AB, Sundaram C, Harikumar KB, Sung B, Tharakan ST, Misra K, Priyadarsini IK, Rajasekharan KN, Aggarwal BB (2008) Biological activities of curcumin and its analogues (Congeners) made by man and mother nature. Biochem Pharmacol 76:1590–1611

  12. 12.

    Gupta AP, Gupta MM, Sushil K (1999) Simultaneous determination of curcuminoids in Curcuma samples using high performance thin layer chromatography. J Liq Chromatogr Relat Technol 22:1561–1569

  13. 13.

    Jadhav BK, Mahadik KR, Paradkar AR (2007) Development and validation of improved reversed phase-HPLC method for simultaneous determination of curcumin, demethoxycurcumin and bis-demethoxycurcumin. Chromatogr 65:483–488

  14. 14.

    Heath DD, Pruitt MA, Brenner DE, Rock CL (2003) Curcumin in plasma and urine: quantitation by high-performance liquid chromatography. J Chromatogr B 783:287–295

  15. 15.

    Lin XL, Xue L, Zhang HY, Zhu CF (2005) Determination of curcumins in turmeric by micellar electrokinetic capillary chromatography. Can J Anal Sci Spectrosc 51:35–42

  16. 16.

    Rohman A (2012) Analysis of curcuminoids in food and pharmaceutical products. Int Food Res J 19:19–27

  17. 17.

    Tóth B, Horvai G (2012) Chromatography, solid-phase extraction, and capillary electrochromatography with MIPs. In: Haupt K (ed) Molecular imprinting, 325th edn. Springer, Berlin, pp 267–306

  18. 18.

    Wang P, Hu W, Su W (2008) Molecularly imprinted poly(methacrylamide-co-methacrylic acid) composite membranes for recognition of curcumin. Anal Chim Acta 615:54–62

  19. 19.

    Azizi ES, Ahmad MN, Islam AKMS, Arbain D, Tahir I (2011) Porogen effect towards the quality of curcumin imprinted polymer. J Chem 11:207–211

  20. 20.

    Kitabatake T, Tabo H, Matsunaga H, Haginaka J (2013) Preparation of monodisperse curcumin-imprinted polymer by precipitation polymerization and its application for the extraction of curcuminoids from Curcuma longa L. Anal Bioanal Chem 405:6555–6561

  21. 21.

    Piletska EV, Burns R, Terry LA, Piletsky SA (2012) Application of a molecularly imprinted polymer for extraction of kukoamine A from potato peels. J Agr Food Chem 60:95–99

  22. 22.

    Vasapollo G, Del Sole R, Mergola L, Lazzoi MR, Scardino A, Scorrano S, Mele G (2011) Molecularly imprinted polymers: present and future prospective. Int J Mol Sci 12:5908–5945

  23. 23.

    Chen L, Xu S, Li J (2011) Recent advances in molecular imprinting technology: current status, challenges and highlighted applications. Chem Soc Rev 40:2922–2942

  24. 24.

    Urraca JL, Marazuela MD, Merino ER, Orellana G, Moreno-Bondi MC (2006) Molecularly imprinted polymers with streamlined mimic for zearalenone analysis. J Chromatogr A 1116:127–134

  25. 25.

    Chen Z, Alvarez-Perez M, Navarro-Villoslada F, Moreno-Bondi MC, Orellana G (2014) Fluorescent sensing of “quat” herbicides with a multifunctional pyrene-labeled monomer and molecular imprinting. Sens Actuat B 191:137–142

  26. 26.

    Connors KA (1987) Binding constants: the measurement of molecular complex stability. Wiley, New York

  27. 27.

    Rampey AM, Umpleby RJ, Rushton GT, Iseman JC, Shah RN, Shimizu KD (2004) Characterization of the imprint effect and the influence of imprinting conditions on affinity, capacity and heterogeneity in molecularly imprinted polymers using the Freundlich isotherm-affinity distribution analysis. Anal Chem 76:1123–1133

  28. 28.

    Ravindran PN, Babu KN, Sivaraman K (eds) (2007) Turmeric: the genus Curcuma. CRC, Boca Raton, p 302

  29. 29.

    Poole CF, Poole SK (2002) In: Simpson NJK (ed) In: Theory meets practice. Solid phase extraction: principles, techniques and applications. Marcel Dekker Inc, New York, pp 183–226

Download references

Acknowledgments

This work has been funded by I-MHERE B.2c grant for Sandwich Doctoral Program of Institut Teknologi Bandung, Indonesia, and by MINECO (ref. CTQ2012-37573-C02-02). JUR thanks the International Excellence Campus CEI-Moncloa for a postdoctoral contract, and ABD thanks the Spanish Ministry of Economy and Competitiveness for a Ramón y Cajal contract.

Author information

Correspondence to Maria C. Moreno-Bondi.

Additional information

Published in the topical collection celebrating ABCs 13th Anniversary.

Electronic supplementary material

Below is the link to the electronic supplementary material.

ESM 1

(PDF 123 KB)

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Wulandari, M., Urraca, J.L., Descalzo, A.B. et al. Molecularly imprinted polymers for cleanup and selective extraction of curcuminoids in medicinal herbal extracts. Anal Bioanal Chem 407, 803–812 (2015). https://doi.org/10.1007/s00216-014-8011-5

Download citation

Keywords

  • Curcumin
  • Bisdemethoxycurcumin
  • Bulk polymerization
  • Molecularly imprinted solid-phase extraction (MISPE)