Advertisement

Electrical Engineering

, Volume 101, Issue 3, pp 733–742 | Cite as

Study on load adaptation of capacitive power transfer system with a four-plate compact capacitive coupler

  • Xueying Wu
  • Yugang SuEmail author
  • Xinyu Hou
  • Xiaodong Qing
  • Xin Dai
Original Paper
  • 47 Downloads

Abstract

This paper proposes an LCL-L compensated capacitive power transfer (CPT) system with a four-plate compact capacitive coupler to achieve load adaptation. The coupling principle of four plates is explained, and the formulas between the cross-coupling capacitances and port capacitances are deduced by establishing a two-port capacitive network model of the coupler. The resonant frequency is designed to be unchanged whether the pick-up is removed or moved back to simplify system control. The model of the coupler and AC impedance model of CPT system are established, and the parameter design method is given. Finally, the feasibility and effectiveness of the proposed topology and its parameter design method are verified by simulation and experimental results.

Keywords

Wireless power transfer Capacitive power transfer Four-plate compact capacitive coupler Load adaptation 

Notes

Acknowledgements

This work was supported by the research funds for the National Natural Science Foundation of China under Grants 51477020 and 51777022.

References

  1. 1.
    Frivaldsky M, Piri M, Spanik P, Jaros V, Kondelova A (2017) Peak efficiency and peak power point operation of wireless energy transfer (WET) system—analysis and verification. Electr Eng 99(4):1439–1451.  https://doi.org/10.1007/s0020201706584 CrossRefGoogle Scholar
  2. 2.
    Hui SYR, Zhong W, Lee CK (2014) A critical review of recent progress in mid-range wireless power transfer. IEEE Trans Power Electron 29(9):4500–4511.  https://doi.org/10.1109/TPEL.2013.2249670 CrossRefGoogle Scholar
  3. 3.
    Aditya K (2018) Analytical design of Archimedean spiral coils used in inductive power transfer for electric vehicles application. Electr Eng 100(3):1–8.  https://doi.org/10.1007/s0020201706637 CrossRefGoogle Scholar
  4. 4.
    Jin X, Le L, Pude Y (2018) Research on the system characteristics of radial offset based on double LCCL. Electr Eng 100(2):711–720.  https://doi.org/10.1007/s0020201706655 CrossRefGoogle Scholar
  5. 5.
  6. 6.
    Zhou S, Mi CC (2016) Multi-paralleled LCC reactive power compensation networks and their tuning method for electric vehicle dynamic wireless charging. IEEE Trans Ind Electron 63(10):6546–6556.  https://doi.org/10.1109/tie.2015.2512236 CrossRefGoogle Scholar
  7. 7.
    Kind V, Pechanek R, Zavrel M, Kavalir T, Turjanica P (2019) Inductive coupling system for electric scooter wireless charging: electromagnetic design and thermal analysis. Electr Eng 2019:1–10.  https://doi.org/10.1007/s00202019007651 CrossRefGoogle Scholar
  8. 8.
    Liu F, Yang Y, Jiang D, Ruan X, Chen X (2017) Modeling and optimization of magnetically coupled resonant wireless power transfer system with varying spatial scales. IEEE Trans Power Electron 32(4):3240–3250.  https://doi.org/10.1109/TPEL.2016.2581840 CrossRefGoogle Scholar
  9. 9.
    Yugang S, Lingzhi C, Chunsen T, Junhao M, Aiguo H (2016) Evolutionary multi-objective optimization of PID parameters for output voltage regulation in ECPT system based on NSGA-II. Trans China Electrotech Soc 31(19):106–114.  https://doi.org/10.3969/j.issn.1000-6753.2016.19.010 CrossRefGoogle Scholar
  10. 10.
    Liu C, Hu AP, Nair NKC (2011) Modelling and analysis of a capacitively coupled contactless power transfer system. IET Power Electron 4(7):808–815.  https://doi.org/10.1049/iet-pel.2010.0243 CrossRefGoogle Scholar
  11. 11.
    Xie S, Yugang S, Chen L, Zhao Y, Tang C (2017) Constant-voltage electric-field coupled wireless power transfer system based on double-sided F-LCLC networks. Autom Electr Power Syst 41(17):134–141.  https://doi.org/10.7500/AEPS20161226011 CrossRefGoogle Scholar
  12. 12.
    Su Y, Xie S, Hu AP, Tang C, Zhou W, Huang L (2017) Capacitive power transfer system with a mixed-resonant topology for constant-current multiple-pickup applications. IEEE Trans Power Electron 32(11):8778–8786.  https://doi.org/10.1109/TPEL.2016.2640314 CrossRefGoogle Scholar
  13. 13.
    Yu-Gang S, Zhou W, Hu AP, Tang C-S, Xie S-Y, Sun Y (2017) Full-duplex communication on the shared channel of a capacitively coupled power transfer system. IEEE Trans Power Electron 32(4):3229–3239.  https://doi.org/10.1109/TPEL.2016.2580607 CrossRefGoogle Scholar
  14. 14.
    Huang L, Hu AP, Swain AK, Yugang S (2016) Z-impedance compensation for wireless power transfer based on electric field. IEEE Trans Power Electron 31(11):7556–7563.  https://doi.org/10.1109/TPEL.2016.2557461 CrossRefGoogle Scholar
  15. 15.
    Liu C, Hu AP, Nair N-KC (2009) Coupling study of a rotary capacitive power transfer system. In: IEEE international conference on industrial technology, pp 1–6.  https://doi.org/10.1109/ICIT.2009.4939623
  16. 16.
    Wahab A, Chong TE, Min LK (1997) Wireless pointing device using capacitive coupling. In: Proceedings of IEEE international symposium on consumer electronics, Singapore, pp 149–152.  https://doi.org/10.1109/ISCE.1997.658374
  17. 17.
    Kline M, Izyumin I, Boser B, Sanders S (2011) Capacitive power transfer for contactless charging. In: Proceedings of 26th IEEE international conference on applied power electronics conference and exposition, Fort Worth, TX, pp 1398–1404.  https://doi.org/10.1109/apec.2011.5744775
  18. 18.
    Piipponen KV, Sepponen R, Eskelinen P (2007) A biosignal instrumentation system using capacitive coupling for power and signal isolation. IEEE Trans Biomed Eng 54(10):1822–1828.  https://doi.org/10.1109/TBME.2007.894830 CrossRefGoogle Scholar
  19. 19.
    Dai J, Ludois DC (2016) Capacitive power transfer through a conformal bumper for electric vehicle charging. IEEE J Emerg Sel Top Power Electron 4(3):1015–1025.  https://doi.org/10.1109/jestpe.2015.2505622 CrossRefGoogle Scholar
  20. 20.
    Su Y-G, Zhao Y-M, Hu AP, Wang Z-H, Tang C-S, Sun Y (2019) An F-type compensated capacitive power transfer system allowing for sudden change of pick-up. IEEE J Emerg Sel Top Power Electron 7:1084–1093CrossRefGoogle Scholar
  21. 21.
    Komaru T, Akita H (2013) Positional characteristics of capacitive power transfer as a resonance coupling system. In: Proceedings of IEEE wireless power transfer conference, Italy, pp 218–221.  https://doi.org/10.1109/WPT.2013.6556922
  22. 22.
    Zhang H, Lu F, Hofmann H, Liu W, Mi C (2016) A four-plate compact capacitive coupler design and LCL-compensated topology for capacitive power transfer in electric vehicle charging application. IEEE Trans Power Electron 31(12):8541–8551.  https://doi.org/10.1109/TPEL.2016.2520963 CrossRefGoogle Scholar
  23. 23.
    Zhang Hua L, Fei H, Heath LW, Chris MC (2018) Six-plate capacitive coupler to reduce electric field emission in large air-gap capacitive power transfer. IEEE Trans Power Electron 33(1):665–675.  https://doi.org/10.1109/TPEL.2017.2662583 CrossRefGoogle Scholar
  24. 24.
    Fei L, Hua Z, Chris M (2018) A two-plate capacitive wireless power transfer system for electric vehicle charging applications. IEEE Trans Power Electron 33(2):964–969.  https://doi.org/10.1109/TPEL.2017.2735365 CrossRefGoogle Scholar
  25. 25.
    Su Y, Fu Q, Ma J, Qing X, Tang C (2019) Fringing electric field suppression method of electric-field coupled power transfer system with a new four-plate coupler. Autom Electr Power Syst 43(2):130–141Google Scholar
  26. 26.
    Theodoridis MP (2012) Effective capacitive power transfer. IEEE Trans Power Electron 27(12):4906–4913.  https://doi.org/10.1109/TPEL.2012.2192502 CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.College of AutomationChongqing UniversityChongqingChina

Personalised recommendations