Multi-GNSS real-time clock estimation using sequential least square adjustment with online quality control
- 344 Downloads
Real-time satellite orbit and clock product is a key prerequisite for real-time precise positioning service based on precise point positioning (PPP). With the rapid development of the multiple global navigation satellite systems (Multi-GNSS), about 120 satellites will be processed for Multi-GNSS real-time clock estimation. Unfortunately, the computation is very time-consuming, especially for quality control since problematic observations are inevitable. Taking advantage of computer technology, sequential least square adjustment with an adapted online quality control procedure is developed to rapidly estimate Multi-GNSS real-time clocks, although various filtering estimators are commonly used now. A globally distributed network including 70 stations tracking mostly satellites of GPS, GLONASS, BDS, and Galileo is employed for experimental validation. The results show that the computation time per epoch is less than 3 s in average and can meet the 5 s update rate of the IGS real-time clock product. Compared to the GeoForschungsZentrum MGEX (GBM) final clock product, the averaged STD values of the estimated clocks of the four GNSS systems are 0.089 ns and 0.153 ns, respectively, for the clock solutions with and without the online quality control, which also confirms the importance of the quality control procedure. The Multi-GNSS kinematic PPP experiment using the estimated clocks with quality control shows that the positioning RMS is about 4 cm and generally 2 cm in vertical and horizontal components, respectively, and the corresponding convergence time is about 15 min.
KeywordsMulti-GNSS Real-time clock estimation Online quality control Sequential least square adjustment
This work was supported partly by the scholarship program of China Scholarship Council (CSC), the Program of the National Natural Science Foundation of China (41731066, 41774025), the Special Fund for Basic Scientific Research of Central Colleges (Grant Nos. 310826165014, 310826171004, Chang’an University), and the Grand Projects of the Beidou-2 System (GFZX0301040308). We also thank the MGEX and GFZ for providing the data and products for this study.
- Dach R, Schaer S, Hugentobler U (2006) Combined multi-system GNSS analysis for time and frequency transfer. In: Proceedings of the 20th European frequency and time forum EFTF06, Braunsehweig, GermanyGoogle Scholar
- Deng Z, Ge M, Uhlemann M et al (2014) Precise orbit determination of BeiDou satellites at GFZ. In: Proceedings of IGS workshop 2014, 23–27 June 2014, Pasadena, USAGoogle Scholar
- Dilssner F, Springer T, Schonemann E et al (2014) Estimation of satellite antenna phase center corrections for BeiDou. In: Proceedings of IGS workshop 2014, 23–27 June 2014, Pasadena, USAGoogle Scholar
- Hutsell ST (1996) Relating the Hadamard variance to MCS Kalman filter clock estimation. In: Proceedings of the 27th annual precise time and time interval (PTTI) meeting, pp 291–302Google Scholar
- Laurichesse D, Cerri L, Berthias JP et al (2013) Real time precise GPS constellation and clocks estimation by means of a Kalman filter. In: Proceedings of ION GNSS 2013, September 16–20, 2013, Nashville, TNGoogle Scholar
- Low T, van de Geijn R (2004) An API for manipulating matrices stored by blocks. FLAME Working Note #12 TR-2004-15, The University of Texas at Austin, Department of Computer SciencesGoogle Scholar
- Petit G, Luzum B (2010) IERS conventions (2010), IERS Technical Note 36 (eds), Verlagdes Bundesamts für Kartographie und Geodäsie, Frankfurt am Main, Germany, http://tai.bipm.org/iers/conv2010/
- Tapley BD, Schutz BE, Born G (2004) Statistical orbit determination. Elsevier, San DiegoGoogle Scholar
- Wu JT, Wu SC, Hajj GA et al (1993) Effects of antenna orientation on GPS carrier phase. Manuscr Geod 18(2):91–98Google Scholar