Mathematical Methods of Operations Research

, Volume 86, Issue 1, pp 215–254 | Cite as

How to solve a design centering problem

Original Article
  • 129 Downloads

Abstract

This work considers the problem of design centering. Geometrically, this can be thought of as inscribing one shape in another. Theoretical approaches and reformulations from the literature are reviewed; many of these are inspired by the literature on generalized semi-infinite programming, a generalization of design centering. However, the motivation for this work relates more to engineering applications of robust design. Consequently, the focus is on specific forms of design spaces (inscribed shapes) and the case when the constraints of the problem may be implicitly defined, such as by the solution of a system of differential equations. This causes issues for many existing approaches, and so this work proposes two restriction-based approaches for solving robust design problems that are applicable to engineering problems. Another feasible-point method from the literature is investigated as well. The details of the numerical implementations of all these methods are discussed. The discussion of these implementations in the particular setting of robust design in engineering problems is new.

Keywords

Gsip Design centering Lower level duality Global optimization 

Notes

Acknowledgements

Funding was provided by Novartis Pharmaceuticals Corporation (IDOEJOAE572).

References

  1. Abdel-Malek HL, Hassan AKSO (1991) The ellipsoidal technique for design centering and region approximation. IEEE Trans Comput Aided Des Integr Circuits Syst 10(8):1006–1014CrossRefGoogle Scholar
  2. Aubin J-P, Frankowska H (1990) Set-valued analysis. Birkhauser, BostonMATHGoogle Scholar
  3. Bank B, Guddat J, Klatte D, Kummer B, Tammer K (1983) Non-linear parametric optimization. Birkhauser, BostonMATHGoogle Scholar
  4. Bemporad A, Filippi C, Torrisi FD (2004) Inner and outer approximations of polytopes using boxes. Comput Geom 27(2):151–178MathSciNetCrossRefMATHGoogle Scholar
  5. Ben-Tal A, Nemirovski A (1998) Robust convex optimization. Math Oper Res 23(4):769–805MathSciNetCrossRefMATHGoogle Scholar
  6. Ben-Tal A, Nemirovski A (1999) Robust solutions of uncertain linear programs. Oper Res Lett 25(1):1–13MathSciNetCrossRefMATHGoogle Scholar
  7. Ben-Tal A, Nemirovski A (2001) Lectures on modern convex optimization: analysis, algorithms, and engineering applications. SIAM, PhiladelphiaCrossRefMATHGoogle Scholar
  8. Bertsekas DP (1999) Nonlinear programming, 2nd edn. Athena Scientific, BelmontMATHGoogle Scholar
  9. Bertsekas DP (2009) Convex optimization theory. Athena Scientific, BelmontMATHGoogle Scholar
  10. Bhattacharjee B, Green WH, Barton PI (2005) Interval methods for semi-infinite programs. Comput Optim Appl 30(1):63–93MathSciNetCrossRefMATHGoogle Scholar
  11. Bhattacharjee B, Lemonidis P, Green WH, Barton PI (2005) Global solution of semi-infinite programs. Mathematical Programming, Series B 103:283–307MathSciNetCrossRefMATHGoogle Scholar
  12. Boyd S, El Ghaoui L, Feron E, Balakrishnan V (1994) Linear matrix inequalities in system and control theory. SIAM, PhiladelphiaCrossRefMATHGoogle Scholar
  13. Boyd S, Vandenberghe L (2004) Convex optimization. Cambridge University Press, New YorkCrossRefMATHGoogle Scholar
  14. Chachuat B (2015) MC++: A Versatile Library for McCormick Relaxations and Taylor Models. http://www.imperial.ac.uk/people/b.chachuat/research.html
  15. Diehl M, Houska B, Oliver Stein, Steuermann P (2013) A lifting method for generalized semi-infinite programs based on lower level Wolfe duality. Comput Optim Appl 54(1):189–210MathSciNetCrossRefMATHGoogle Scholar
  16. Du K, Kearfott RB (1994) The cluster problem in multivariate global optimization. J Global Optim 5(3):253–265Google Scholar
  17. Floudas CA, Gümüş ZH, Ierapetritou MG (2001) Global optimization in design under uncertainty: feasibility test and flexibility index problems. Ind Eng Chem Res 40:4267–4282CrossRefGoogle Scholar
  18. GAMS Development Corporation (2014) GAMS: General Algebraic Modeling System. http://www.gams.com
  19. Geoffrion AM (1971) Duality in nonlinear programming: a simplified applications-oriented development. SIAM Rev 13(1):1–37MathSciNetCrossRefMATHGoogle Scholar
  20. Grant M, Boyd S (2008) Graph implementations for nonsmooth convex programs. In: Blondel V, Boyd Stephen, Kimura H (eds) Recent advances in learning and control, lecture notes in control and information sciences. Springer, Berlin, pp 95–110Google Scholar
  21. Grant M, Boyd S (2014) CVX: Matlab software for disciplined convex programming, version 2.1. http://cvxr.com/cvx
  22. Günzel H, Jongen HTh, Stein O (2007) On the closure of the feasible set in generalized semi-infinite programming. Central Eur J Oper Res 15(3):271–280MathSciNetCrossRefMATHGoogle Scholar
  23. Günzel H, Jongen H Th, Stein O (2008) Generalized semi-infinite programming: on generic local minimizers. J Global Optim 42(3):413–421Google Scholar
  24. Halemane KP, Grossmann IE (1983) Optimal process design under uncertainty. AIChE J 29(3):425–433MathSciNetCrossRefGoogle Scholar
  25. Harwood SM, Barton PI (2016) Lower level duality and the global solution of generalized semi-infinite programs. Optimization 65(6):1129–1149MathSciNetCrossRefMATHGoogle Scholar
  26. Hendrix EMT, Mecking CJ, Hendriks THB (1996) Finding robust solutions for product design problems. Eur J Oper Res 92(1):28–36CrossRefMATHGoogle Scholar
  27. Hettich R, Kortanek KO (1993) Semi-infinite programming: theory, methods, and applications. SIAM Rev 35(3):380–429MathSciNetCrossRefMATHGoogle Scholar
  28. Houska B, Logist F, Van Impe J, Diehl M (2012) Robust optimization of nonlinear dynamic systems with application to a jacketed tubular reactor. J Process Control 22(6):1152–1160CrossRefGoogle Scholar
  29. Kanzi N, Nobakhtian S (2010) Necessary optimality conditions for nonsmooth generalized semi-infinite programming problems. Eur J Oper Res 205(2):253–261MathSciNetCrossRefMATHGoogle Scholar
  30. Khachiyan LG, Todd MJ (1993) On the complexity of approximating the maximal inscribed ellipsoid for a polytope. Math Programm 61(1–3):137–159MathSciNetCrossRefMATHGoogle Scholar
  31. Klatte D, Kummer B (1985) Stability properties of infima and optimal solutions of parametric optimization problems. Lect Notes Econ Math Syst 255:215–229MathSciNetCrossRefMATHGoogle Scholar
  32. Loeblein C, Perkins JD (1998) Economic analysis of different structures of on-line process optimization systems. Comput Chem Eng 22(9):1257–1269CrossRefGoogle Scholar
  33. Lofberg J (2004) YALMIP: A toolbox for modeling and optimization in MATLAB. In: 2004 IEEE international conference on computer aided control systems design, pp 284–289Google Scholar
  34. Mattheij R, Molenaar J (2002) Ordinary differential equations in theory and practice. SIAM, PhiladelphiaCrossRefMATHGoogle Scholar
  35. Misener R, Floudas CA (2014) ANTIGONE: algorithms for coNTinuous/integer global optimization of nonlinear equations. J Global Optim 59(2–3):503–526MathSciNetCrossRefMATHGoogle Scholar
  36. Mitsos A, Lemonidis P, Barton PI (2008) Global solution of bilevel programs with a nonconvex inner program. J Global Optim 42(4):475–513MathSciNetCrossRefMATHGoogle Scholar
  37. Mitsos A, Chachuat B, Barton PI (2009) McCormick-based relaxations of algorithms. SIAM J Optim 20(2):573–601MathSciNetCrossRefMATHGoogle Scholar
  38. Mitsos A (2011) Global optimization of semi-infinite programs via restriction of the right-hand side. Optimization 60(10–11):1291–1308MathSciNetCrossRefMATHGoogle Scholar
  39. Mitsos A, Tsoukalas A (2014) Global optimization of generalized semi-infinite programs via restriction of the right hand side. J Global Optim 61(1):1–17MathSciNetCrossRefMATHGoogle Scholar
  40. Moore RE, Kearfott RB, Cloud MJ (2009) Introduction to interval analysis, SIAM, PhiladelphiaGoogle Scholar
  41. MOSEK (2015) http://www.mosek.com/
  42. Nesterov Y, Nemirovski A (1994) Interior-point polynomial algorithms in convex programming. SIAM, PhiladelphiaCrossRefGoogle Scholar
  43. Nguyen VH, Strodiot J-J (1992) Computing a global optimal solution to a design centering problem. Math Programm 53(1–3):111–123MathSciNetCrossRefMATHGoogle Scholar
  44. Parkinson A, Sorensen C, Pourhassan N (1993) A general approach for robust optimal design. J Mech Des 115(1):74–80CrossRefGoogle Scholar
  45. Polak E (1987) On the mathematical foundations of nondifferentiable optimization in engineering design. SIAM Rev 29(1):21–89MathSciNetCrossRefGoogle Scholar
  46. Polik I, Terlaky T (2007) A Survey of the S-Lemma. SIAM Rev 49(3):371–418MathSciNetCrossRefMATHGoogle Scholar
  47. Ralph D, Dempe S (1995) Directional derivatives of the solution of a parametric nonlinear program. Math Programm 70:159–172MathSciNetMATHGoogle Scholar
  48. Rocco CM, Moreno J, Carrasquero N (2003) Robust design using a hybrid-cellular-evolutionary and interval-arithmetic approach: a reliability application. Reliab Eng Syst Saf 79(2):149–159CrossRefGoogle Scholar
  49. Rückmann J-J, Shapiro A (1999) First-order optimality conditions in generalized semi-infinite programming. J Optim Theory Appl 101(3):677–691MathSciNetCrossRefMATHGoogle Scholar
  50. Sahinidis NV (2014) BARON 14.0.3: global optimization of mixed-integer nonlinear programs, user’s manual. http://www.minlp.com/downloads/docs/baronmanual.pdf
  51. Salazar DE, Rocco CM (2007) Solving advanced multi-objective robust designs by means of multiple objective evolutionary algorithms (MOEA): A reliability application. Reliab Eng Syst Saf 92(6):697–706CrossRefGoogle Scholar
  52. Schaber SD (2014) Tools for dynamic model development. PhD thesis, Massachusetts Institute of TechnologyGoogle Scholar
  53. Scott JK (2012) Reachability analysis and deterministic global optimization of differential-algebraic systems. PhD thesis, Massachusetts Institute of TechnologyGoogle Scholar
  54. Scott JK, Barton PI (2013) Bounds on the reachable sets of nonlinear control systems. Automatica 49(1):93–100MathSciNetCrossRefMATHGoogle Scholar
  55. SeDuMi (2015): Optimization over symmetric cones. http://sedumi.ie.lehigh.edu/
  56. Seifi A, Ponnambalam K, Vlach J (1999) A unified approach to statistical design centering of integrated circuits with correlated parameters. IEEE Trans Circuits Syst I Fundam Theory Appl 46(1):190–196CrossRefGoogle Scholar
  57. Stein O (2006) A semi-infinite approach to design centering. In: Dempe S, Kalashnikov V (eds) Optimization with mulitvalued mappings, chapter 1. Springer, Berlin, pp 209–228CrossRefGoogle Scholar
  58. Stein O (2012) How to solve a semi-infinite optimization problem. Eur J Oper Res 223(2):312–320MathSciNetCrossRefMATHGoogle Scholar
  59. Stein O, Still G (2003) Solving semi-infinite optimization problems with interior point techniques. SIAM J Control Optim 42(3):769–788MathSciNetCrossRefMATHGoogle Scholar
  60. Stein O, Winterfeld A (2010) Feasible method for generalized semi-infinite programming. J Optim Theory Appl 146(2):419–443MathSciNetCrossRefMATHGoogle Scholar
  61. Still G (1999) Generalized semi-infinite programming: theory and methods. Eur J Oper Res 119:301–313CrossRefMATHGoogle Scholar
  62. Stuber MD, Barton PI (2011) Robust simulation and design using semi-infinite programs with implicit functions. Int J Reliab Saf 5(3–4):378–397CrossRefGoogle Scholar
  63. Stuber MD, Barton PI (2015) Semi-infinite optimization with implicit functions. Ind Eng Chem Res 54(5):307–317CrossRefGoogle Scholar
  64. Sturm JF (1999) Using SeDuMi 1.02, A Matlab toolbox for optimization over symmetric cones. Optim Methods Soft 11(1–4):625–653Google Scholar
  65. Swaney RE, Grossmann IE (1985a) An index for operational flexibility in chemical process design–part I: formulation and theory. AIChE J 31(4):621–630CrossRefGoogle Scholar
  66. Swaney RE, Grossmann IE (1985b) An index for operational flexibility in chemical process design–part II: computational algorithms. AIChE J 31(4):631–641CrossRefGoogle Scholar
  67. Tawarmalani M, Sahinidis NV (2005) A polyhedral branch-and-cut approach to global optimization. Math Programm 103(2):225–249MathSciNetCrossRefMATHGoogle Scholar
  68. Tsoukalas A, Rustem B, Pistikopoulos EN (2009) A global optimization algorithm for generalized semi-infinite, continuous minimax with coupled constraints and bi-level problems. J Global Optim 44(2):235–250MathSciNetCrossRefMATHGoogle Scholar
  69. Wechsung A (2013) Global optimization in reduced space. PhD thesis, Massachusetts Institute of TechnologyGoogle Scholar
  70. Wechsung A, Schaber SD, Barton PI (2014) The cluster problem revisited. J Global Optim 58(3):429–438MathSciNetCrossRefMATHGoogle Scholar
  71. Winterfeld A (2008) Application of general semi-infinite programming to lapidary cutting problems. Eur J Oper Res 191(3):838–854MathSciNetCrossRefMATHGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2017

Authors and Affiliations

  1. 1.ExxonMobil Research and EngineeringAnnandaleUSA
  2. 2.Process Systems Engineering LaboratoryMassachusetts Institute of TechnologyCambridgeUSA

Personalised recommendations