Advertisement

Influence of dead metal zone on dislocation strengthening effect during micro-progressive forming

  • J. Q. Ran
  • L. Xu
  • J. L. Wang
  • T. Xu
  • F. GongEmail author
ORIGINAL ARTICLE
  • 47 Downloads

Abstract

Micro-scale plastic deformation (microforming) is a promising manufacturing technology in modern industries. To put microformed parts in a more competitive position compared with micro-products made by other micro-manufacturing methods (such as micromachining and 3D printing), micro-progressive forming must be fully studied for the mass production of micro-parts to obtain good grain texture and decrease product costs. Simultaneously, the undiscovered dislocation strengthening effect of micro-scale progressive forming should be investigated. Using micro-universal joint progressive forming as a case study, the influence of the dead metal zone–induced strengthening effect on ductile fracture in micro-progressive forming is discussed. Based on the results of upsetting experiment and finite element simulation, it was found that the specimen produced via metal foil forward-extrusion-blanking process eliminated the ductile fracture when applying the same experiment condition to the specimen produced by micromachining. Based on the micro-indentation and X-ray diffraction results, a dead metal zone–induced dislocation strengthening model was established, and the mechanism for the strengthening effect during micro-progressive forming was revealed. This research thus provides an in-depth understanding of the micro-scale progressive forming process and takes an important step in the field of ductile fracture in multi-stage plastic deformation.

Keywords

Micro-progressive forming Strengthening effect Dead metal zone Multi-stage plastic deformation 

Notes

Funding information

The work described in this paper was supported by grants from the National Natural Science Foundation of China (Grant No. 51705333), the key laboratory of Guangdong Province and the Natural Science Foundation of Guangdong Province (Grant No. 2017A030310352), the Natural Science Foundation of ShenZhen University (Grant No. 2016039), the open project of the key laboratory of Guangdong Province (PEM201605), and the Shenzhen Science and Technology Program (Grant Nos. JCYJ20160520175255386 and JCYJ20170818104529523).

References

  1. 1.
    Xu J, Guo B, Shan DB, Wang CJ, Li J, Liu YW, Qu DS (2012) Development of a micro-forming system for micro-punching process of micro-hole arrays in brass foil. J Mater Process Technol 212:1501–1512CrossRefGoogle Scholar
  2. 2.
    Fu MW, Chan WL (2013) Micro-scaled progressive forming of bulk micropart via directly using sheet metals. Mater Des 49:774–783CrossRefGoogle Scholar
  3. 3.
    Chan WL, Fu MW (2013) Meso-scaled progressive forming of bulk cylindrical and flanged parts using sheet metal. Mater Des 43:249–257CrossRefGoogle Scholar
  4. 4.
    Ghassemali E, Tan MJ, Jarfors AEW, Lim SCV (2013) Optimization of axisymmetric open-die micro-forging/extrusion processes: an upper bound approach. J Mater Process Technol 71:58–67Google Scholar
  5. 5.
    Ghassemali E, Tan MJ, Wah CB, Lim SCV, Jarfors AEW (2015) Effect of cold-work on the Hall–Petch breakdown in copper based micro-components. Mech Mater 80:124–135CrossRefGoogle Scholar
  6. 6.
    Meng B, Fu MW, Fu CM, Wang JL (2015) Multivariable analysis of micro shearing process customized for progressive forming of micro-parts. Int J Mech Sci 93:191–203CrossRefGoogle Scholar
  7. 7.
    Lemaitre J (1985) A continuous damage mechanics model for ductile fracture. J Eng Mater Technol 107:83–89CrossRefGoogle Scholar
  8. 8.
    Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth, I. Yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99:2–15CrossRefGoogle Scholar
  9. 9.
    Xue L, Wierzbicki T (2008) Ductile fracture initiation and propagation modeling using damage plasticity theory. Eng Fract Mech 75:3276–3293CrossRefGoogle Scholar
  10. 10.
    Li H, Fu MW, Lu J, Yang H (2011) Ductile fracture: experiments and computations. Int J Plast 27:147–180CrossRefGoogle Scholar
  11. 11.
    Freudenthal FA (1950) The inelastic behavior of solids. Wiley, New YorkGoogle Scholar
  12. 12.
    Tirosh J (1971) On the dead-zone formation in plastic axially-symmetric converging flow. J Mech Phys Solids 19:39–47CrossRefGoogle Scholar
  13. 13.
    Eivani AR, Taheri AK (2008) The effect of dead metal zone formation on strain and extrusion force during equal channel angular extrusion. Comput Mater Sci 42(1):0–20CrossRefGoogle Scholar
  14. 14.
    Qamar SZ (2010) Shape complexity, metal flow, and dead metal zone in cold extrusion. Mater Manuf Process 25:1454–1461CrossRefGoogle Scholar
  15. 15.
    Lee DJ, Yoon EY, Park LJ, Kim HS (2012) The dead metal zone in high-pressure torsion. Scr Mater 67:384–387CrossRefGoogle Scholar
  16. 16.
    Wan L, Wang D (2015) Numerical analysis of the formation of the dead metal zone with different tools in orthogonal cutting. Simul Model Pract Theory 56:1–15CrossRefGoogle Scholar
  17. 17.
    Wan L, Haddag B, Wang DZ, Sheng Y, Yang DM (2018) Effects of friction conditions on the formation of dead metal zone in orthogonal cutting – a finite element study. Mach Sci Technol 22:934–952CrossRefGoogle Scholar
  18. 18.
    Ran JQ, Fu MW (2014) A hybrid model for analysis of ductile fracture in micro-scaled plastic deformation of multiphase alloys. Int J Plast 61:1–16CrossRefGoogle Scholar
  19. 19.
    Ran JQ, Fu MW, Chan WL (2013) The influence of size effect on the ductile fracture in micro-scaled plastic deformation. Int J Plast 41:65–81CrossRefGoogle Scholar
  20. 20.
    Liu JG, Fu MW, Chan WL (2012) A constitutive model for modeling of the deformation behavior in microforming with a consideration of grain boundary strengthening. Comput Mater Sci 55:85–94CrossRefGoogle Scholar
  21. 21.
    Xu ZT, Peng LF, Lai XM, Fu MW (2014) Geometry and grain size effects on the forming limit of sheet metals in micro-scaled plastic deformation. Mater Sci Eng A 611:345–353CrossRefGoogle Scholar
  22. 22.
    Xu ZT, Peng LF, Fu MW, Lai XM (2015) Size effect affected formability of sheet metals in micro/meso scale plastic deformation: experiment and modeling. Int J Plast 68:34–54CrossRefGoogle Scholar
  23. 23.
    Chen FK, Tsai JW (2006) A study of size effect in micro-forming with micro-hardness tests. J Mater Process Technol 177(1–3):146–149CrossRefGoogle Scholar
  24. 24.
    Williamson GK, Smallman RE (1955) Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-Scherrer spectrum. Philos Mag 1:34–46CrossRefGoogle Scholar
  25. 25.
    Ashby MF (1970) The deformation of plastically non-homogeneous materials. Philos Mag 21:399–424CrossRefGoogle Scholar
  26. 26.
    Petch NJ (1953) J Iron Steel Inst 174:25–28Google Scholar
  27. 27.
    Armstrong RW (1962) The plastic deformation of polycrystalline aggregates. Philos Mag 7:45–48CrossRefGoogle Scholar
  28. 28.
    Armstrong RW (1982) The yield and flow stress dependence on polycrystal grain size. In: Baker TN, Petch NJ (eds) Yield, Flow and FracturePolycrystals, pp 1–31Google Scholar
  29. 29.
    Bouquerel J, Verbeken K, De Cooman BC (2006) Microstructure-based model for the static mechanical behavior of multiphase steels. Acta Mater 54:1443–1456CrossRefGoogle Scholar
  30. 30.
    Argon AS (2008) Strengthening mechanisms in crystal plasticity. Oxford University Press, OxfordGoogle Scholar
  31. 31.
    Rodriguez R, Gutierrez I (2003) Correlation between nanoindentation and tensile properties. Influence of the indentation size effect. Mater Sci Eng A 361:377–384CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • J. Q. Ran
    • 1
  • L. Xu
    • 1
  • J. L. Wang
    • 2
    • 3
  • T. Xu
    • 1
  • F. Gong
    • 1
    Email author
  1. 1.College of Mechatronics and Control EngineeringShenzhen UniversityShenzhenChina
  2. 2.Shenzhen Research Institute of Shandong UniversityShenzhenChina
  3. 3.School of Mechanical EngineeringShandong UniversityJinanChina

Personalised recommendations