Advertisement

Methods for determination of low-cycle properties from monotonic tensile tests of 1.2344 steel applied for hot forging dies

  • Joanna WollmannEmail author
  • Andrzej Dolny
  • Marcin Kaszuba
  • Zbigniew Gronostajski
  • Maik Gude
ORIGINAL ARTICLE

Abstract

Selected methods for determining fatigue life in the strain-life approach, described by the Manson-Coffin-Basquin (MCB) equation based on results of static tensile tests are presented in this paper. These methods served for determining low-cycle characteristics for 1.2344 steel applied for dies used in forging at high temperatures. The authors presented the results of tensile tests performed at room temperature and at elevated temperatures (300 °C, 500 °C, 600 °C, and 700 °C). Data obtained from these tests enabled to theoretically determine fatigue life characteristics according to the methods: universal slope, 4-point correlation, Mitchell’s, modified universal slope method, Bäumel’s and Seeger’s method, modified 4-point-correlation method, Roessle’s and Fatemi’s method, as well as median method. Curves obtained on this basis were then compared to charts obtained from periodic deformation tests. Results obtained in this manner were compared to actual wear of tools (made of 1.2344 steel) used in the hot forging process of a cover-type forging. Fatigue tests covered deformation of specimens with uniaxial, periodically variable load until their cracking, and were performed at temperatures 20 °C, 300 °C, and 600 °C and at four levels of total strain εac: 0.5%, 0.8%, 1.0%, and 2.0%. Clear differences between the values of coefficients and exponents of the MCB equation were observed depending on the applied theoretical method and depending on test temperature. The research goal is description of different methods for determining fatigue life in strain-life approach based on results of static tensile tests and comparison them with the results from experiment. This will allow choosing the best method to predict the fatigue life of tools made of steel 1.2344 and usage of this method in the future, saving time, and costs related to the performance of experimental tests.

Keywords

Hot forging Low-cycle fatigue Tools durability 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

References

  1. 1.
    Manson SS (1965) Fatigue: a complex subject – some simple approximations. Exp Mech 5(7):193–226CrossRefGoogle Scholar
  2. 2.
    Socie DF, Mitchell MR, Caulfield EM (1977) Fundamentals of modern fatigue analysis, Fracture Control Program Report, No. 26, University of Illinois, USAGoogle Scholar
  3. 3.
    Muralidharan U, Manson SS (1988) Modified universal slopes equation for estimation of fatigue characteristics. J Eng Mater Technol Trans ASME 110(1):55–58CrossRefGoogle Scholar
  4. 4.
    Bäumel A Jr, Seeger T (1990) Materials data for cyclic loading. Elsevier Science Publishers, AmsterdamGoogle Scholar
  5. 5.
    Ong JH (1993) An improved technique for the prediction of axial fatigue life from tensile date. Int J Fatigue 15(3):213–219CrossRefGoogle Scholar
  6. 6.
    Roessle ML, Fatemi A (2000) Strain-controlled fatigue properties of steels and some simple approximations. Int J Fatigue 22(6):495–511CrossRefGoogle Scholar
  7. 7.
    Meggiolaro MA, Castro JTP (2004) Statistical evaluation of strain-life fatigue crack initiation predictions. Int J Fatigue 26(5):463–476CrossRefGoogle Scholar
  8. 8.
    Nieslony A, Kurek A, Ch D, Kaufmann H (2012) A study of compatibility between two classical fatigue curve models based on some selected structural materials. Int J Fatigue 39:88–94CrossRefGoogle Scholar
  9. 9.
    Kim KS, Chen X, Han C, Lee HW (2002) Estimation methods for fatigue properties of steels under axial and torsional loading. Int J Fatigue 24:783–793CrossRefGoogle Scholar
  10. 10.
    Marohnić T, Basan R, Franulović M (2015) Some considerations on the evaluation of methods for the estimation of fatigue parameters from monotonic properties. Procedia Eng 101:277–284CrossRefGoogle Scholar
  11. 11.
    Zhang Y, Hu CL, Zhao Z, Li AP, Xu XL, Shi WB (2013) Low cycle fatigue behavior of a Cr–Mo–V matrix-type high-speed steel used for cold forging. Mater Des 44:612–621CrossRefGoogle Scholar
  12. 12.
    Mrozinski S, Golanski G (2013) Elevated temperature low cycle fatigue properties of martensitic cast steel. Int J Eng Technol 13(01):86–91Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  1. 1.Institute of Lightweight Engineering and Polymer TechnologyTechnische Universität DresdenDresdenGermany
  2. 2.Department of Metal Forming and MetrologyPolitechnika WroclawskaWroclawPoland

Personalised recommendations