Advertisement

Rapid electrolyte wetting of lithium-ion batteries containing laser structured electrodes: in situ visualization by neutron radiography

  • Jan Bernd HabedankEmail author
  • Florian J. Günter
  • Nicolas Billot
  • Ralph Gilles
  • Tobias Neuwirth
  • Gunther Reinhart
  • Michael F. Zaeh
ORIGINAL ARTICLE
  • 16 Downloads

Abstract

Lithium-ion batteries are widely used as energy storage devices due to their high energy density and versatile applicability. Their dissemination in the mobility sector is presently limited by their high manufacturing costs. The electrolyte wetting process is one major cost driver, as process times of hours or even days are necessary to ensure complete electrolyte impregnation. In this contribution, multilayer pouch cells comprising three different types of electrodes were manufactured and filled with the electrolyte liquid while being subject to in situ neutron radiography. Two different electrode porosities were compared, as well as laser structured electrodes with additionally created micro channels, aiming at an acceleration of the wetting process. With the powerful tool of neutron radiography, it is possible to visualize and determine very precisely the wetting time, which was significantly shorter for the batteries with electrodes of higher porosity. Laser structuring of the electrodes accelerated the wetting process even further, reducing the time to complete wetting by at least one order of magnitude. These findings present great potential for the reduction of the processing time and thereby the manufacturing costs of lithium-ion batteries.

Keywords

Lithium-ion battery Laser structuring Neutron imaging 3D electrodes Electrolyte filling 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

This study is funded by the German Federal Ministry of Education and Research (BMBF) under grant number 03XP0081 (ExZellTUM II).

References

  1. 1.
    Sakti A, Michalek JJ, Fuchs ERH, Whitacre JF (2015) A techno-economic analysis and optimization of Li-ion batteries for light-duty passenger vehicle electrification. J Power Sources 273:966–980CrossRefGoogle Scholar
  2. 2.
    Wood DL, Li J, Daniel C (2015) Prospects for reducing the processing cost of lithium ion batteries. J Power Sources 275:234–242CrossRefGoogle Scholar
  3. 3.
    Korthauer R (2013) Handbuch Lithium-Ionen-Batterien. Springer Berlin Heidelberg, Berlin, HeidelbergCrossRefGoogle Scholar
  4. 4.
    Knoche T, Zinth V, Schulz M, Schnell J, Gilles R Reinhart G (2016) In situ visualization of the electrolyte solvent filling process by neutron radiography 15th International Meeting on Lithium Batteries (IMLB) 331, 267–276Google Scholar
  5. 5.
    Knoche T, Reinhart G (2015) Electrolyte filling of large-scale lithium-ion batteries. Main Influences and Challenges for Production Technology AMM 794:11–18Google Scholar
  6. 6.
    Günter FJ, Habedank JB, Schreiner D, Neuwirth T, Gilles R, Reinhart G (2018) Introduction to electrochemical impedance spectroscopy as a measurement method for the wetting degree of Lithium-ion cells. J Electrochem Soc 165:A3249–A3256CrossRefGoogle Scholar
  7. 7.
    Zheng H, Li J, Song X, Liu G, Battaglia VS (2012) A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes. Electrochim Acta 71:258–265CrossRefGoogle Scholar
  8. 8.
    Zheng H, Tan L, Liu G, Song X, Battaglia VS (2012) Calendering effects on the physical and electrochemical properties of Li [Ni1/3Mn1/3Co1/3]O2 cathode. J Power Sources 208:52–57CrossRefGoogle Scholar
  9. 9.
    Sheng Y, Fell CR, Son YK, Metz BM, Jiang J, Church BC (2014) Effect of calendering on electrode wettability in lithium-ion batteries. Front Energy Res 2:83CrossRefGoogle Scholar
  10. 10.
    Lee, S. G. & Jeon, D. H. 2014 Effect of electrode compression on the wettability of lithium-ion batteries 15th International Meeting on Lithium Batteries (IMLB) 265, 363–369Google Scholar
  11. 11.
    Weydanz, W. J., Reisenweber, H., Gottschalk, A., Schulz, M., Knoche, T., Reinhart, G., Masuch, M., Franke, J. & Gilles, R. 2018 Visualization of electrolyte filling process and influence of vacuum during filling for hard case prismatic lithium ion cells by neutron imaging to optimize the production process 15th International Meeting on Lithium Batteries (IMLB) 380, 126–134Google Scholar
  12. 12.
    Sears VF (2006) Neutron scattering lengths and cross sections. Neutron News 3:26–37CrossRefGoogle Scholar
  13. 13.
    Mangang, M., Pröll, J., Tarde, C., Seifert, H. J. & Pfleging, W. 2014 Ultrafast laser microstructuring of LiFePO 4 cathode material. In SPIE LASE (ed. U. Klotzbach, K. Washio & C. B. Arnold), 89680M: SPIEGoogle Scholar
  14. 14.
    Habedank JB, Endres J, Schmitz P, Zaeh MF, Huber HP (2018) Femtosecond laser structuring of graphite anodes for improved lithium-ion batteries: ablation characteristics and process design. Journal of Laser Applications 30:32205CrossRefGoogle Scholar
  15. 15.
    Habedank JB, Kraft L, Rheinfeld A, Krezdorn C, Jossen A, Zaeh MF (2018) Increasing the discharge rate capability of lithium-ion cells with laser-structured graphite anodes: modeling and simulation. J Electrochem Soc 165:A1563–A1573CrossRefGoogle Scholar
  16. 16.
    Bae, C.-J., Erdonmez, C. K., Halloran, J. W. & Chiang, Y.-M. 2013 Design of battery electrodes with dual-scale porosity to minimize tortuosity and maximize performance. Advanced materials (Deerfield Beach, Fla) 25, 1254–1258Google Scholar
  17. 17.
    Pfleging W (2018) A review of laser electrode processing for development and manufacturing of lithium-ion batteries. Nanophotonics 7:13CrossRefGoogle Scholar
  18. 18.
    Pfleging, W., Kohler, R. & Pröll, J. 2014 Laser generated microstructures in tape cast electrodes for rapid electrolyte wetting: new technical approach for cost efficient battery manufacturing. In SPIE LASE (ed. U. Klotzbach, K. Washio & C. B. Arnold), 89680B: SPIEGoogle Scholar
  19. 19.
    Günther T, Billot N, Schuster J, Schnell J, Spingler FB, Gasteiger HA (2016) The manufacturing of electrodes: key process for the future success of lithium-ion batteries. AMR 1140:304–311CrossRefGoogle Scholar
  20. 20.
    Marks T, Trussler S, Smith AJ, Xiong D, Dahn JR (2011) A guide to Li-ion coin-cell electrode making for academic researchers. J Electrochem Soc 158:A51CrossRefGoogle Scholar
  21. 21.
    Schulz, M. & Schillinger, B. 2015 ANTARES. Cold neutron radiography and tomography facility JLSRF 1Google Scholar
  22. 22.
    Calzada, E., Gruenauer, F., Mühlbauer, M., Schillinger, B. & Schulz, M. 2009 New design for the ANTARES-II facility for neutron imaging at FRM II. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 605, 50–53Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  1. 1.Institute for Machine Tools and Industrial Management (iwb)Technical University MunichGarchingGermany
  2. 2.Heinz Maier-Leibnitz Zentrum (MLZ)Technical University MunichGarchingGermany

Personalised recommendations