Advertisement

Novel epoxy-carbonized coconut shell nanoparticles composites for car bumper application

  • J. O. Agunsoye
  • A. K. Odumosu
  • O. Dada
ORIGINAL ARTICLE
  • 3 Downloads

Abstract

The structure and mechanical properties of carbonized coconut shell nanoparticles (CSnp) reinforced epoxy composite have been evaluated to establish the possibility of using the composite as a new material for automobile car bumper application. Epoxy resin of the type LY556 was blended together with CSnp at 5–25 wt%. Scanning electron microscopy (SEM), mechanical test, and thermogravimetric analysis (TGA) were examined. SEM morphology reveals adhesion between CSnp and polymer matrix at low wt%CSnp while at higher weight percent of CSnp agglomeration of CSnp was observed. The addition of CSnp at 25 wt% produced the optimal hardness values of 26.35 VHN, tensile stress of 338.75 MPa, and flexural strength of 156 MPa, while at 10 wt% CSnp produced optimal impact energy value of 5.71 J. The developed epoxy composite when compared with two existing Toyota models showed improved impact energy at break of 10.5% over Big Daddy Model and 37.45% over Carina model under the same testing conditions.

Keywords

Coconut shell Mechanical properties Microstructure Car bumper and thermal properties 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Hassan SB, Aigbodion VS, Patrick SN (2012) Development of polyester/eggshell particulate composites. Tribol Ind 34(4):217–225Google Scholar
  2. 2.
    Campbell FC (2010) Structural composite materials. ASM International, Novelty, pp 1–30 Compositelab.com/composite-materials/resins, 21th Sept, 2017Google Scholar
  3. 3.
    Mishra S, Tripathy S, Nayak S (2002) Novel eco-friendly biocomposites, biofiber reinforced biodegradable polyester amide composite-fabrication and properties evaluation. J Reinf Plast Compos 21(1):55–70Google Scholar
  4. 4.
    Ramachandran M, Bhargava, Rishabh, Raichurkar PP (2016) Effect of nanotechnology in enhancing mechanical properties of composite materials. Int J Text Eng Process 2(1):59–63Google Scholar
  5. 5.
    Ricciotti L, Roviello G, Tarallo O, Borbone F, Ferone C, Colangelo F, Catauro M, Cioffi R (2013) Synthesis and characterizations of melamine-based epoxy resins. Int J Mol Sci 14:18200–18214CrossRefGoogle Scholar
  6. 6.
    Akindapo JO, Agov ET, Garba DK, Ogabi RO (2017) Comparative assessment of mechanical properties of groundnut shell and rice husk reinforced epoxy composites. Am J Mech Eng 5(3):76–86Google Scholar
  7. 7.
    Kumar TV, Chandrasekaran M, Santhanam V (2017) Characteristics analysis of coconut shell husk reinforced polymer composites. ARPN J Eng Appl Sci 12(8):2017Google Scholar
  8. 8.
    Easwara PGL, Keerthi GBS, Velmurugan R (2017) Comparative study of impact strength characteristics of treated and untreated sisal polyester composites. Procedia Eng 173:778–785CrossRefGoogle Scholar
  9. 9.
    Prabhu R, Rahul MP, Aeilias A, Sunny B, Alok J, Bhat T (2017) Investigation of tribological property of coconut shell powder filled epoxy glass composites. Ame J Mater Sci 7(5):174–184Google Scholar
  10. 10.
    Manjunatha Chary GH, Sabeel Ahmed K (2017) Experimental characterization of coconut shell particle reinforced epoxy composites. JMES 8(5):1661–1667Google Scholar
  11. 11.
    Somashekhar TM, Naik P, Nayak V, Mallikappa, Rahul S (2018) Study of mechanical properties of coconut shell powder and tamarind shell powder reinforced with epoxy composites. IOP Conf Ser: Mater Sci Eng 376:012105CrossRefGoogle Scholar
  12. 12.
    Agunsoye JO, Talabi SI, Obidiegwu EO, Awe IO (2014) The development and characterisation of epoxy-foundry basic slag particulate composite materials. Int J Compos Mater 4(2):93–102Google Scholar
  13. 13.
    Sapuan SM, Harimi M Mechanical properties of epoxy/coconut shell filler particle composites. Arab J Sci Eng 28. Number 2B:171–181Google Scholar
  14. 14.
    Durowaye SI, Lawal GI, Akande MA, Durowaye VO (2014) Mechanical properties of particulate coconut shell and palm fruit polyester composites. Int J Mater Eng 4(4):141–147Google Scholar
  15. 15.
    Mishra A (2017) Mechanical properties of coconut shell dust, epoxy-fly ash hybrid composite. Am J Eng Res (AJER) 6(9):166–174Google Scholar
  16. 16.
    Davoodi MM, Sapuan SM, Aidy A, Abu Osman NA, Oshkour AA, Abas ABW (2012) Development process of new bumper beam for passenger car: a review. Mater Des 40:304313.  https://doi.org/10.1016/j.matdes.2012.03.060 CrossRefGoogle Scholar
  17. 17.
    Davoodi MM, Sapuan SM, Ali A, Ahmad D, Khalina A (2010) Thermoplastic impact property improvement in hybrid natural fibre epoxy composite bumper beam. IOP Conf Series Mater Sci Eng 11:012013CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Metallurgical and Materials EngineeringUniversity of LagosAkokaNigeria

Personalised recommendations