Advertisement

Study on the effect of force-thermal coupling error on the gear hobbing accuracy and its visualization

  • Xianguang Li
  • Yong Yang
  • Zheng ZouEmail author
  • Feng Deng
  • Li Wang
  • Qian Tang
ORIGINAL ARTICLE
  • 11 Downloads

Abstract

A force-thermal coupling error model was proposed to investigate the coupling effect of thermal error and force-induced error on the machining accuracy. Based on the developed model, numerical simulations were conducted to unveil the temperature distributions of both the assembly and the worktable, as well as corresponding displacement errors. Besides, based on the two-degrees-of-freedom hobbing locus motion, an equation to characterize the meshing relation between the hob and the workpiece was deduced with the consideration of the force-thermal coupling errors. By using this equation, an interface, which can visualize the gear hobbing process and map the force-thermal coupling error to the resultant gear profile, was developed in the MATLAB. Further comparison between experimental data and simulation results prove the credibility of our proposed method.

Keywords

High-speed dry gear hobbing Force-thermal coupling Meshing equation Visual interface 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgement

This study is supported by China Postdoctoral Science special Foundation (2017M612920); Chongqing Outstanding Youth Scholar Special Foundation (cstc2014jcyjjq70001); Key Program of National Natural Foundation of China (51635003); and Chongqing Postdoctoral Science special Foundation (Xm2017044, Xm2017110). Chongqing Scientific and technological innovation leader project.

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interests.

References

  1. 1.
    Zaeh M, Siedl D (2007) A new method for simulation of machining performance by integrating finite element and multi-body simulation for machine tools. CIRP Ann Manuf Technol 56(1):383–386CrossRefGoogle Scholar
  2. 2.
    Franco P, Estrems M, Faura F (2004) Influence of radial and axial runouts on surface roughness in face milling with round insert cutting tools. Int J Mach Tool Manu 44(15):1555–1565CrossRefGoogle Scholar
  3. 3.
    Abukhshim NA, Mativenga PT, Sheikh MA (2006) Heat generation and temperature prediction in metal cutting: a review and implications for high speed machining. Int J Mach Tool Manu 46(7):782–800CrossRefGoogle Scholar
  4. 4.
    Bouzakis KD, Lili E, Michailidis N, Friderikos O (2008) Manufacturing of cylindrical gears by generating cutting processes: a critical synthesis of analysis methods. CIRP Ann Manuf Technol 57(2):676–696CrossRefGoogle Scholar
  5. 5.
    Bouzakis KD, Friderikos O, Tsiafis I (2009) FEM-supported simulation of chip formation and flow in gear hobbing of spur and helical gears. CIRP J Manuf Sci Technol 1(1):18–26CrossRefGoogle Scholar
  6. 6.
    Michalski J, Skoczylas L (2008) A comparative analysis of the geometrical surface texture of a real and virtual model of a tooth flank of a cylindrical gear. J Mater Process Technol 204(1–3):331–342CrossRefGoogle Scholar
  7. 7.
    Wang S, Yang Y, Li X, Zhou J, Kang L (2013) Research on thermal deformation of large-scale computer numerical control gear hobbing machines. Journal of Mechanical Science & Technology 27(5):1393–1405CrossRefGoogle Scholar
  8. 8.
    Shokrani A, Dhokia V, Newman ST (2012) Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. Int J Mach Tool Manu 57(2):83–101CrossRefGoogle Scholar
  9. 9.
    Bergseth E, Sjöberg S, Björklund S (2012) Influence of real surface topography on the contact area ratio in differently manufactured spur gears. Tribol Int 56(3):72–80CrossRefGoogle Scholar
  10. 10.
    Pan Q, Jin X, Jia Y (2014) Gear surface residual stress measurement with ultrasonic wave. In: IEEE International Conference on Mechatronics and Automation. pp 413–417Google Scholar
  11. 11.
    Husson R, Dantan JY, Baudouin C, Silvani S, Scheer T, Bigot R (2012) Evaluation of process causes and influences of residual stress on gear distortion. CIRP Ann Manuf Technol 61(1):551–554CrossRefGoogle Scholar
  12. 12.
    Wu Y, Tao X (2005) Study on CNC Manufacturing Technology for Gear. Hefei University of Technology Press (in Chinese), Hefei, pp 80–110Google Scholar
  13. 13.
    Deng F, Tang Q, Li X, Yang Y, Zou Z (2018) Study on mapping rules and compensation methods of cutting-force-induced errors and process machining precision in gear hobbing. Int J Adv Manuf Technol 97:3859–3871CrossRefGoogle Scholar
  14. 14.
    Krulewich DA (1998) Temperature integration model and measurement point selection for thermally induced machine tool errors. Mechantronics 8(4):395–412CrossRefGoogle Scholar
  15. 15.
    Yang X, Cao H, Li B, Jafar S, Zhu L (2018) A thermal energy balance optimization model of cutting space enabling environmentally benign dry hobbing. J Clean Prod 172:2323–2335CrossRefGoogle Scholar
  16. 16.
    Liu Z, Tang Q, Li X, Zou Z, Yang Y (2018) A method for thermal characteristics modeling of hob assembly on dry hobbing machine, Archieve. Proc Inst Mech Eng C J Mech Eng Sci 203-210:1989–1996Google Scholar
  17. 17.
    Li X, Yang Y, Zou Z, Liu Z, Wang L, Tang Q (2018) Critical study on the thermal-structural characteristics of worktable assembly of a dry hobbing machine. Int J Adv Manuf Technol 1–10Google Scholar
  18. 18.
    Bryan JB (1990) International status of thermal error research. Ann CIRP 39(2):645–656CrossRefGoogle Scholar
  19. 19.
    Chen D, Study on the hobbing force. J Harbin Inst Technol 1960(2):69–82 (in Chinese)Google Scholar
  20. 20.
    Yu C, Huang X (2007) Calculation method for hobbing force. Tool Technol (in Chinese) 41(3):42–45Google Scholar
  21. 21.
    Wan S (1987) Analysis method for rolling bearing. China Machine Press, China (in Chinese)Google Scholar
  22. 22.
    Wu X (2009) Principle of Gear Meshing, 2nd edn. Xi’an Jiaotong University Press (in Chinese), Xi’an, pp 126–172Google Scholar
  23. 23.
    Vasilis D, Nectarios V, Aristomenis A (2006) Advanced computer aided design simulation of gear hobbing by means of three-dimensional kinematics modeling gear hobbing. J Manuf Sci Eng 129(5):911–918CrossRefGoogle Scholar
  24. 24.
    Litvin FL, Fuentes A (2004) Gear geometry and applied theory. Cambridge University Press, Cambridge, p 577CrossRefGoogle Scholar
  25. 25.
    Litvin FL, Seol IH (1996) Computerized determination of gear tooth surface as envelope to two parameter family of surfaces. Comput Methods Appl Mech Eng 138(1–4):213–225MathSciNetCrossRefGoogle Scholar
  26. 26.
    “Gear Manual” Editorial Board (2002) Gear Manufacture Manual, 2nd edn. Beijing: Mechanical Industry Press, pp 7–41. (in Chinese)Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  1. 1.Chongqing Machine Tool (Group) Co., Ltd.ChongqingChina
  2. 2.The State Key Laboratory of Mechanical TransmissionChongqing UniversityChongqingChina
  3. 3.Chongqing University of TechnologyChongqingChina

Personalised recommendations