Advertisement

Effects of molding conditions on injection molded direct joining under various surface fine-structuring

  • Fuminobu Kimura
  • Shotaro Kadoya
  • Yusuke Kajihara
ORIGINAL ARTICLE
  • 5 Downloads

Abstract

Injection molded direct joining (IMDJ), a metal–polymer joining technique, consists of two basic processes: surface fine-structuring and injection insert molding. During molding, melt polymer infiltrates the surface fine structure on a metal workpiece that is initially placed in a mold; subsequently, the metal workpiece is joined with an injection-molded polymer. This study investigates the effects of molding conditions on the joining strength of IMDJ using two different surface types of fine-structured metal workpieces. The primary difference in the fine structures is size; one has a nanometer scale and the other a micrometer scale. Using two types of metal workpieces, we perform injection molding experiments with six different injection speeds and two different flowing shapes of mold. The results of the joining strength evaluated by tensile shear tests show that the speed–strength correlation depends on the fine structure. To explain this dependency on fine structure size, we assume the infiltration of melt polymer differs between the nanometer scale fine structure and the micrometer scale fine structure. The results also show that the flowing shape affects the joining strength. To confirm the effect of the shape, we measure the time-course variations of the temperature and pressure in the mold, and observe the fiber distribution in the molded polymer parts using X-ray micro computed tomography.

Keywords

Metal–polymer direct joining Fine structure surface Injection molding Molding condition Flowing shape 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

This work was supported by JSPS KAKENHI (#15K17946, #17J00345), Ogasawara Foundation, and the Foundation for the Promotion of Industrial Science. The experiments were partially supported by the Yokoi group, the University of Tokyo, Japan.

References

  1. 1.
    Fuchs ER, Field FR, Roth R, Kirchain RE (2008) Strategic materials selection in the automobile body: economic opportunities for polymer composite design. Compos Sci Technol 68(9):1989CrossRefGoogle Scholar
  2. 2.
    Kabche JP, Caccese V, Berube KA, Bragg R (2007) Experimental characterization of hybrid composite-to-metal bolted joints under flexural loading. Compos Part B Eng 38(1):66CrossRefGoogle Scholar
  3. 3.
    Arenas JM, Alía C, Narbón JJ, Ocaña R, González C (2013) Considerations for the industrial application of structural adhesive joints in the aluminium-composite material bonding. Compos Part B Eng 44(1):417CrossRefGoogle Scholar
  4. 4.
    Katayama S, Kawahito Y (2008) Laser direct joining of metal and plastic. Scr Mater 54:321Google Scholar
  5. 5.
    Fortunato A, Cuccolini G, Ascari A, Orazi L, Campana G, Tani G (2010) Hybrid metal-plastic joining by means of laser. Int J Mater Form 3(1):1131CrossRefGoogle Scholar
  6. 6.
    Holtkamp J, Roesner A, Gillner A (2010) Advances in hybrid laser joining. Int J Adv Manuf Technol 47(9-12):923CrossRefGoogle Scholar
  7. 7.
    Bauernhuber A, Markovits T (2012) Laser assisted joining of metal pins and thin plastic sheets. Phys Procedia 39:108CrossRefGoogle Scholar
  8. 8.
    Tan X, Zhang J, Shan J, Yang S, Ren J (2015) Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel. Compos Part B Eng 70:35CrossRefGoogle Scholar
  9. 9.
    Amancio-Filho ST, Bueno C, dos Santos JF, Huber N, Hage E Jr (2011) On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures. Mater Sci Eng A 528(10-11):3841CrossRefGoogle Scholar
  10. 10.
    Liu FC, Liao J, Nakata K (2014) Joining of metal to plastic using friction lap welding. Mater Des 54:236CrossRefGoogle Scholar
  11. 11.
    Balle F, Wagner G, Eifler D (2009) Ultrasonic metal welding of aluminium sheets to carbon fibre reinforced thermoplastic composites. Adv Eng Mater 11(1-2):35CrossRefGoogle Scholar
  12. 12.
    Sasaki H, Kobayashi I, Sai S, Hirahara H, Oishi Y, Mori K (1999) Adhesion of ABS resin to metals treated with triazine trithiol monosodium aqueous solution. J Adhes Sci Technol 13(4):523CrossRefGoogle Scholar
  13. 13.
    Boerio FJ, Shah P (2005) Adhesion of injection molded PVC to steel substrates. J Adhes 81(6):645CrossRefGoogle Scholar
  14. 14.
    Kang ZX, Mori K, Oishi Y (2005) Surface modification of magnesium alloys using triazine dithiols. Surf Coat Technol 195(2–3):162CrossRefGoogle Scholar
  15. 15.
    Honkanen M, Hoikkanen M, Vippola M, Vuorinen J, Lepistö T (2009) Metal-plastic adhesion in injection-molded hybrids. J Adhes Sci Technol 23(13-14):1747CrossRefGoogle Scholar
  16. 16.
    Ramani K, Moriarty B (1998) Thermoplastic bonding to metals via injection molding for macro-composite manufacture. Polym Eng Sci 38(5):870CrossRefGoogle Scholar
  17. 17.
    Lucchetta G, Marinello F, Bariani PF (2011) Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding. CIRP Ann 60(1):559CrossRefGoogle Scholar
  18. 18.
    Kajihara Y, Tamura Y, Kimura F, Suzuki G, Nakura N, Yamaguchi E (2018) Joining strength dependence on molding conditions and surface textures in blast-assisted metal-polymer direct joining. CIRP Ann 67 (1):591CrossRefGoogle Scholar
  19. 19.
    Byskov-Nielsen J, Boll JV, Holm AH, Højsholt R, Balling P (2010) Ultra-high-strength micro-mechanical interlocking by injection molding into laser-structured surfaces. Int J Adhes Adhes 30(6):485CrossRefGoogle Scholar
  20. 20.
    Taki K, Nakamura S, Takayama T, Nemoto A, Ito H (2016) Direct joining of a laser-ablated metal surface and polymers by precise injection molding. Microsyst Technol 22:31CrossRefGoogle Scholar
  21. 21.
    Huang B, Sun L, Li L, Zhang L, Lin Y, Che J (2017) Experimental investigation of the strength of polymer-steel direct adhesion (PSDA) joints with micro-structures ablated by laser. J Mater Process Technol 249:407CrossRefGoogle Scholar
  22. 22.
    Andoh N, Osumi K (2005) “Nano Molding”: permanent bond between aluminum and polymer. Kunstl Int 9:106Google Scholar
  23. 23.
    Fabrin PA, Hoikkanen ME, Vuorinen JE (2007) Adhesion of thermoplastic elastomer on surface treated aluminum by injection molding. Polym Eng Sci 47(8):1187CrossRefGoogle Scholar
  24. 24.
    Horiuchi S (2014) .. In: Proceedings of 5th World Congress on Adhesion and Related Phenomena (WCARP-V), pp 193–194Google Scholar
  25. 25.
    Kimura F, Kadoya S, Kajihara Y (2016) Effects of molding conditions on injection molded direct joining using a metal with nano-structured surface. Precis Eng 45:203CrossRefGoogle Scholar
  26. 26.
    Yeh RY, Hsu RQ (2015) Application of porous oxide layer in plastic/metal direct adhesion by injection molding. J Adhes Sci Technol 29(15):1617CrossRefGoogle Scholar
  27. 27.
    Lyu X, Kimura F, Zhao Y, Kunieda M, Kajihara Y (2017) .. In: Proceedings of ASPEN 2017, pp MFT–O–01Google Scholar
  28. 28.
    Shimamoto K, Sekiguchi Y, Sato C (2016) Effects of surface treatment on the critical energy release rates of welded joints between glass fiber reinforced polypropylene and a metal. Int J Adhes Adhes 67:31CrossRefGoogle Scholar
  29. 29.
    Kadoya S, Kimura F, Kajihara Y (2018) Tester for tensile shear evaluation of metal-polymer single lap joint. Precis Eng 59(12):1247Google Scholar
  30. 30.
    Yoshii M, Kuramoto H, Kato K (1994) Experimental study of transcription of minute width grooves in injection molding. Polym Eng Sci 34(15):1211CrossRefGoogle Scholar
  31. 31.
    Yokoi H, Han X, Takahashi T, Kim W (2006) Effects of molding conditions on transcription molding of microscale prism patterns using ultra-high-speed injection molding. Polym Eng Sci 46(9):1140CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.The University of TokyoTokyoJapan

Personalised recommendations