Advertisement

A multi-source similar subparts based NC process fusion and regrouping approach

  • Changhong XuEmail author
  • Shusheng Zhang
  • Zhanying Feng
  • Liu Zhang
  • Renche Wang
ORIGINAL ARTICLE
  • 4 Downloads

Abstract

As a vast number of 3D CAD models associated with NC process are generated each year, taking full advantage of them is an effective way to generate the NC process for query subparts with less time and lower cost. However, there has been little research on how to discover and utilize the valuable information imbedded in the NC process of multiple existing similar subparts. In this paper, a novel multi-source similar subparts-based NC process fusion and regrouping approach is proposed. Firstly, the multi-source similar subparts are described as multi-dimension vectors consisting of feature attributes and NC process. Secondly, the attribute similarities of query feature and similar features are calculated to establish the similarity matrix. Then, based on the multi-source similar features, the gray relational analysis is utilized to mine the association between feature attributes and NC process, and the relation matrix is constructed. Based on the multiplication of similarity matrix and relation matrix, the adaption matrix is calculated to represent the important degree of the NC process of similar features for query feature. Through the weighted sum of adaption values and adjustments, the NC process is obtained for the query subpart. Finally, based on the feature interactions in the query subpart, the NC process of the query subpart is regrouped to meet the requirements of NC machining.

Keywords

NC process Fusion Regrouping Multi-source similar subparts 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

The authors are grateful to the financial support from the National Science Foundation of China (No. 51375397).

References

  1. 1.
    Chen Y, Huang J, Zhang Z, Xie YB (2013) Technical note: a part affordance-based approach for capturing detailed design knowledge. Comput Aided Des 45(12):1617–1629CrossRefGoogle Scholar
  2. 2.
    Ruiz P, Kamsu-Foguem B, Noyes D (2013) Knowledge reuse integrating the collaboration from experts in industrial maintenance management. Knowl-Based Syst 50(9):171–186CrossRefGoogle Scholar
  3. 3.
    Zhang X, Nassehi A, Newman ST (2014) Feature recognition from CNC part programs for milling operations. Int J Adv Manuf Technol 70(1–4):397–412CrossRefGoogle Scholar
  4. 4.
    Zhen LY, Dong HF, Vichare P, Nassehi A, Newman ST (2008) Systematic modeling and reusing of process knowledge for rapid process configuration. Robot Comput Integr Manuf 24(6):763–772CrossRefGoogle Scholar
  5. 5.
    Shahin A, Janatyan N (2010) Group technology and lean production: a conceptual model for enhancing productivity. Int Bus Res 3(4):105–118CrossRefGoogle Scholar
  6. 6.
    Jong W, Lai P, Chen Y, Ting Y (2014) Automatic process planning of mold components with integration of feature recognition and group technology. Int J Adv Manuf Technol 78(5–8):807–824Google Scholar
  7. 7.
    Bai J, Gao S, Tang W, Liu Y, Guo S (2010) Design reuse oriented partial retrieval of CAD models. Comput Aided Des 42(12):1069–1084CrossRefGoogle Scholar
  8. 8.
    Ramani K, Lou K, Jayanti S, Iyer N, Kalyanaraman Y (2005) Three-dimensional shape searching: state-of-the-art review and future trends. Comput Aided Des 37(5):509–530CrossRefGoogle Scholar
  9. 9.
    Liu J, Liu X, Ni Z, Zhou H (2018) A new method of reusing the manufacturing information for the slightly changed 3D CAD model. J Intell Manuf 29(8):1–18Google Scholar
  10. 10.
    Zhang X, Zhang H, Jiang Z, Wang YH (2013) A decision-making approach for end-of-life strategies selection of used parts. Int J Adv Manuf Technol 87:1457–1464CrossRefGoogle Scholar
  11. 11.
    Huang R, Zhang SS, Xu CH, Zhang XM, Zhang CC (2015) A flexible and effective NC process reuse approach for similar subparts. Comput Aided Des 62:64–77CrossRefGoogle Scholar
  12. 12.
    Begum S, Ahmed MU, Funk P, Xiong N, Schéele BV (2009) A case-based decision support system for individual stress diagnosis using fuzzy similarity matching. Comput Intell 25(3):180–195MathSciNetCrossRefGoogle Scholar
  13. 13.
    Minor M, Bergmann R, Görg S (2014) Case-based adaptation of workflows. Inf Syst 40:142–152CrossRefGoogle Scholar
  14. 14.
    Yusof Y, Latif K (2014) Survey on computer-aided process planning. Int J Adv Manuf Technol 75(1–4):77–89CrossRefGoogle Scholar
  15. 15.
    Hua GR, Zhou XH, Ruan XY (2007) GA-based synthesis approach for machining scheme selection and operation sequencing optimization for prismatic parts. Int J Adv Manuf Technol 33(5–6):594–603CrossRefGoogle Scholar
  16. 16.
    Deb S, Ghosh K, Paul S (2006) A neural network based methodology for machining operations selection in computer-aided process planning for rotationally symmetrical parts. J Intell Manuf 17(5):557–569CrossRefGoogle Scholar
  17. 17.
    Amaitik SM, Kiliç SE (2007) An intelligent process planning system for prismatic parts using STEP features. Int J Adv Manuf Technol 31(9–10):978–993CrossRefGoogle Scholar
  18. 18.
    Sang CP (2003) Knowledge capturing methodology in process planning. Comput Aided Des 35(12):1109–1117CrossRefGoogle Scholar
  19. 19.
    Deng JL (1989) Introduction to grey system. J Grey Syst 1:1–24MathSciNetzbMATHGoogle Scholar
  20. 20.
    Shi KN, Zhang DH, Ren JX (2015) Optimization of process parameters for surface roughness and microhardness in dry milling of magnesium alloy using Taguchi with grey relational analysis. Int J Adv Manuf Technol 81(1–4):645–651CrossRefGoogle Scholar
  21. 21.
    Guo Y, Zhang G, Wang L, Hu Y (2015) Optimization of parameters for EDM drilling of thermal-barrier-coated nickel superalloys using gray relational analysis method. Int J Adv Manuf Technol 83(9–12):1595–1160Google Scholar
  22. 22.
    Abhang LB, Hameedullah M (2012) Determination of optimum parameters for multi-performance characteristics in turning by using grey relational analysis. Int J Adv Manuf Technol 63(1–4):13–24CrossRefGoogle Scholar
  23. 23.
    Hu J, Qi J, Peng YH (2015) New CBR adaptation method combining with problem–solution relational analysis for mechanical design. Comput Ind 66:41–51CrossRefGoogle Scholar
  24. 24.
    Huang R, Zhang SS, Bai XL, Xu CH, Huang B (2015) An effective subpart retrieval approach of 3D CAD models for manufacturing process reuse. Comput Ind 67:38–53CrossRefGoogle Scholar
  25. 25.
    Huang R, Zhang SS, Bai XL, Xu CH (2014) Multi-level structuralized model-based definition model based on machining features for manufacturing reuse of mechanical parts. Int J Adv Manuf Technol 75(5–8):1035–10480CrossRefGoogle Scholar
  26. 26.
    Chou JS (2009) Web-based CBR system applied to early cost budgeting for pavement maintenance project. Expert Syst Appl 36(2):2947–2960CrossRefGoogle Scholar
  27. 27.
    Zhang S (2012) Nearest neighbor selection for iteratively k NN imputation. J Syst Softw 85(11):2541–2552CrossRefGoogle Scholar
  28. 28.
    Fyson M, Toll DG (2008) Case-based system for slope design. Comput Geotech 35(3):468–478CrossRefGoogle Scholar
  29. 29.
    Li H, Sun J (2009) Gaussian case-based reasoning for business failure prediction with empirical data in China. Inf Sci 179(1):89–108CrossRefGoogle Scholar
  30. 30.
    Wang P, Meng P, Zhai JY, Zhu ZQ (2013) A hybrid method using experiment design and grey relational analysis for multiple criteria decision making problems. Knowl-Based Syst 53(9):100–107Google Scholar
  31. 31.
    Xu C, Zhang S, Huang B, Li XL, Huang R (2017) NC process reuse oriented effective subpart retrieval approach of 3D CAD models. Comput Ind 90:1–16CrossRefGoogle Scholar
  32. 32.
    Kaya B (2015) Surface roughness inspection in milling operations with photometric stereo and PNN. Int J Adv Manuf Technol 81(5–8):1215–1222CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • Changhong Xu
    • 1
    • 2
    Email author
  • Shusheng Zhang
    • 2
  • Zhanying Feng
    • 1
  • Liu Zhang
    • 1
  • Renche Wang
    • 1
  1. 1.Nanjing Research Institute of Electronics TechnologyNanjingChina
  2. 2.The Key Laboratory of Contemporary Designing and Integrated Manufacturing Technology, Ministry of EducationNorthwestern Polytechnical UniversityXi’anChina

Personalised recommendations