Advertisement

Monitoring and evaluation of the wire drawing process using thermal imaging

  • Joakim LarssonEmail author
  • Anton Jansson
  • Patrik Karlsson
Open Access
ORIGINAL ARTICLE
  • 86 Downloads

Abstract

Wire drawing is a cold work metal forming process which is dependant of a functional lubrication process. If the lubrication fails, there is a risk that both the tools and the produced wire will be damaged. Process monitoring of wire drawing is rare in today’s industry since there are no commercialised methods that deliver consistent results. In this paper, a method for monitoring of the wire drawing process is proposed and evaluated. A thermal imaging camera was used for acquiring thermal images of the wire as it leaves the drawing tool. It was found that the proposed method could capture changes in the wire drawing process and had correlation to the drawing force. An equation for estimating the friction condition between the wire and the drawing die using the wire temperature was also proposed and evaluated against experiments. The results showed that the new equation produced results that correlated well to results obtained using a conventional equation that use drawing force.

Keywords

Wire drawing Thermal imaging camera Process monitoring 

References

  1. 1.
    Wright RN (2009) Wire technology. Elsevier LtdGoogle Scholar
  2. 2.
    Enghag P (2009) Steel wire technology. Örebro: Materialteknik HBGoogle Scholar
  3. 3.
    Shemenski R (2008) Ferrous wire handbook. Guildford, Conn.: Wire Association InternationalGoogle Scholar
  4. 4.
    Nilsson B, Stenlund B (1984) Detection of lubrication failures in wire drawing. Wire Ind 51(611):855–858Google Scholar
  5. 5.
    Holm T, Karlstrom KE, Philipson A, Nilsson B (1985) Lubrication failures in wire drawing. Wire Ind 52(616):242–245Google Scholar
  6. 6.
    Nilsson B (1986) Lubrication failures in wire drawing. Wire Ind 53(627):275–278Google Scholar
  7. 7.
    Nilsson B (1991) Die wear monitoring and control of drawing. Wire Ind., no. January, pp. 40–43Google Scholar
  8. 8.
    Nilsson B (1994) In-process die wear diagnosis by contact resistance measurement. Wire J Int 27(6):76–80Google Scholar
  9. 9.
    Nilsson B (1984) MODEL 83 tearing detector system. pp. 1–12Google Scholar
  10. 10.
    Pease NC (1984) Flaw protection in wire drawing, Patent number GB2137344A, UK.Google Scholar
  11. 11.
    Sato T, Yoshikawa K, Okitsu H, Morita I, Saga M (1980) Assessment of frictional conditions by acoustic-emission technique in metal forming. J Jpn Soc Techn Plast 21(234):608–613Google Scholar
  12. 12.
    Masaki S, Tabata T, Konishi K (1985) Evaluation of lubrication in wire drawing using acoustic emission method. J Jpn Soc Techn Plast 26(295):835–841Google Scholar
  13. 13.
    Masaki S, Tabata T, Zuh B-Q, Hayasashi H (1988) A method for evaluating lubrication in wire drawing by acoustic emission technique. J Jpn Soc Techn Plast 29(334):1166–1171Google Scholar
  14. 14.
    Seuthe U., US 8,720,272 B2, 2014Google Scholar
  15. 15.
    Pejryd L, Larsson J, Olsson M (Aug. 2017) Process monitoring of wire drawing using vibration sensoring. CIRP J Manuf Sci Technol 18:65–74CrossRefGoogle Scholar
  16. 16.
    Nilsson B (2001) Diagnosing wire drawing processes by indirect measurements. WIRE, vol. 2, no. April, pp. 70–73Google Scholar
  17. 17.
    Larsson J, Johansson-Cider H, and Jarl M, Monitoring of the wiredrawing process, in Annual convention of the wire association international monitoring, 2013, no. 83Google Scholar
  18. 18.
    Larsson J, Jansson A, Pejryd L (2017) Process monitoring of the wire drawing process using a web camera based vision system. J Mater Process Technol 249:512–521CrossRefGoogle Scholar
  19. 19.
    Cruz-Albarrán IA, Benítez-Rangel JP, Osornio-Ríos RA, Morales-Hernández LA (2017) Human emotions detection based on a smart-thermal system of thermographic images. Infrared Phys Technol 81:250–261CrossRefGoogle Scholar
  20. 20.
    Janssens O, Schulz R, Slavkovikj V, Stockman K, Loccufier M, van de Walle R, van Hoecke S (2015) Thermal image based fault diagnosis for rotating machinery. Infrared Phys Technol 73:78–87CrossRefGoogle Scholar
  21. 21.
    Berg A, Ahlberg J, Felsberg M (2016) Enhanced analysis of thermographic images for monitoring of district heat pipe networks. Pattern Recogn Lett 83:215–223CrossRefGoogle Scholar
  22. 22.
    Speka M, Matteıä S, Pilloz M, Ilie M (Apr. 2008) The infrared thermography control of the laser welding of amorphous polymers. NDT&E Int 41(3):178–183CrossRefGoogle Scholar
  23. 23.
    Singh G, Anil Kumar TC, Naikan VNA (2016) Induction motor inter turn fault detection using infrared thermographic analysis. Infrared Phys Technol 77:277–282CrossRefGoogle Scholar
  24. 24.
    Byrne G, Dornfeld D, Inasaki I, Ketteler G, König W, Teti R (1995) Tool condition monitoring (TCM) - the status of research and industrial application. Annals of the CIRP 44(2):541–567CrossRefGoogle Scholar
  25. 25.
    Prasad BS, Prabha KA, Kumar PVSG (2017) Condition monitoring of turning process using infrared thermography technique – an experimental approach. Infrared Phys Technol 81:137–147CrossRefGoogle Scholar
  26. 26.
    FLIR Systems INC, Flir a315 / a615, 2014Google Scholar
  27. 27.
    ResearchIR, Version 3.4.13235. FLIR Systems Inc., 2011Google Scholar
  28. 28.
    LabVIEW, 2013 version 13.0.1. National Instruments, 2014Google Scholar
  29. 29.
    Siebel E, Kobitzsch R (1942) Die Erwärmung des Ziehgutes biem Drahtzienhen. Stahl und Eisen 63(6):110–114Google Scholar
  30. 30.
    Karlsson P, Krakhmalev P, Gåård A, Bergström J (2013) Influence of work material proof stress and tool steel microstructure on galling initiation and critical contact pressure. Tribol Int 60:104–110CrossRefGoogle Scholar
  31. 31.
    ASTM G40 standard teminology relating to wear and erosion. 1999Google Scholar

Copyright information

© The Author(s) 2018

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Authors and Affiliations

  1. 1.School of Science and TechnologyÖrebro UniversityÖrebroSweden

Personalised recommendations