Advertisement

A springback prediction method for a cylindrical workpiece bent with the multi-point forming method

  • Chunguo Liu
  • Tao Yue
  • Donglai Li
ORIGINAL ARTICLE
  • 19 Downloads

Abstract

An analytical method is proposed to predict springback and residual stress distribution of the multi-point formed cylindrical workpiece. Considering the loading model of the multi-point forming process, the bending moment can be obtained by superimposing the bending moment generated by each punch, which is calculated through the stress in the thickness direction. The springback value and the residual stress in the tangential direction are obtained theoretically. The strain and stress variation in the thickness direction during the loading and unloading process are also analyzed. The finite element (FE) simulation and the bending experiment (EXP) are conducted to make a comparison with the analytical (ANA) results. The results show that the proposed method can effectively predict the springback value and the residual stress distribution in multi-point forming of a cylindrical workpiece.

Keywords

Springback Residual stress Multi-point forming Finite element method 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Li MZ, Hu ZQ, Cai ZY, Gong XP (2007) Method of multi-point continuous forming for the free form surface parts. Chin J Mater Eng 12:155–159Google Scholar
  2. 2.
    Yan RJ, Lin Y, Xin C, Hu Y (2013) Research on residual stress for hull plate in cold forming. Adv Mater Res 838-841:347–354CrossRefGoogle Scholar
  3. 3.
    Qu EH, Li MZ, Li R, Cui MY, Lin JL (2018) Research on formability in multi-point forming with different elastic pads. Int J Adv Manuf Technol 98:1887–1901CrossRefGoogle Scholar
  4. 4.
    Xing J, Cheng YY, Li MZ (2017) Research on swinging unit multi-point die with discrete elastic cushion in flexible stretch forming process. Int J Adv Manuf Technol 91:237–245CrossRefGoogle Scholar
  5. 5.
    Radha KL, Vikas KC, Dwivedi JP, Singh VP, Sandeep K (2013) Springback analysis of rectangular sectioned bar of non linear work hardening materials under torsional loading. Appl Mech Mater 393:422–434CrossRefGoogle Scholar
  6. 6.
    Chan KC, Wang SH (1999) Theoretical analysis of springback in bending of integrated circuit leadframes. J Mater Process Technol 91(1–3):111–115CrossRefGoogle Scholar
  7. 7.
    Queener CA, De Angelis RJ (1968) Elastic springback and residual stresses in plate metal formed by bending. Trans AIME 61: 757–768Google Scholar
  8. 8.
    Zou T, Xin J, Li D, Ren Q (2014) Analytical approach of springback of arced thin plates bending. Procedia Eng 81:993–998CrossRefGoogle Scholar
  9. 9.
    Wagoner RH, Lim H, Lee MG (2013) Advanced issues in springback. Int J Plast 45:3–20CrossRefGoogle Scholar
  10. 10.
    Zhang QF, Cai ZY, Zhang Y, Li MZ (2013) Springback compensation method for doubly curved plate in multi-point forming. Mater Des 47:377–385CrossRefGoogle Scholar
  11. 11.
    Zhang ZT, Lee D (1995) Development of a new model for plane strain bending and springback analysis. J Mater Eng Perform 4:291–300CrossRefGoogle Scholar
  12. 12.
    Zhang ZT, Hu SJ (1998) Stress and residual stress distributions in plane strain bending. Int J Mech Sci 40:533–543CrossRefGoogle Scholar
  13. 13.
    Osman MA, Shazly M, El-Mokaddem A, Wifi AS (2010) Springback prediction in V-die bending: modeling and experimentation. J Achiev Mater Manuf Eng 38:179–186Google Scholar
  14. 14.
    Hwang SY, Lee JH, Yang YS, Yoo MJ (2010) Springback adjustment for multi-point forming of thick plates in shipbuilding. Comput Aided Des 42(11):1001–1012CrossRefGoogle Scholar
  15. 15.
    Li L, Seo YH, Heo SC, Kang BS, Kim J (2010) Numerical simulations on reducing the unloading springback with multi-step multi-point forming technology. Int J Adv Manuf Technol 48:45–61CrossRefGoogle Scholar
  16. 16.
    Gong XP, Li MZ, Lu QP, Peng ZQ (2012) Research on continuous multi-point forming method for rotary surface. J Mater Process Technol 212:227–236CrossRefGoogle Scholar
  17. 17.
    Sherbiny ME, Zein H, Abd-Rabou M, shazly ME (2014) Thinning and residual stresses of plate metal in the deep drawing process. Mater Des 55:869–879CrossRefGoogle Scholar
  18. 18.
    Singh A, Agrawal A (2016) Comparison of deforming forces, residual stresses and geometrical accuracy of deformation machining with conventional bending and forming. J Mater Process Technol 234:259–271CrossRefGoogle Scholar
  19. 19.
    Seifi R, Salimi-Majd D (2012) Effects of plasticity on residual stresses measurement by hole drilling method. Mech Mater 53:72–79CrossRefGoogle Scholar
  20. 20.
    Davoodi B, Zareh-Desari B (2014) Assessment of forming parameters influencing spring-back in multi-point forming process: a comprehensive experimental and numerical study. Mater Des 59:103–114CrossRefGoogle Scholar
  21. 21.
    Nanu N, Brabie G (2011) Influence of material properties on the interaction between residual stress and springback in the case of in plane sheets forming. Arch Civ Mech Eng 11(4):979–991CrossRefGoogle Scholar
  22. 22.
    Wang CT, Gary K, Taylan A (1993) Mathematical modeling of plane-strain bending of plate and plate. J Mater Process Technol 39:279–304CrossRefGoogle Scholar
  23. 23.
    Adibi H, Ardakani MHA, Dariani BM (2010) Springback analysis of plate metal laminates after U-bending. Metal 5:18–20Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.Roll Forging Research InstituteJilin UniversityChangchunPeople’s Republic of China
  2. 2.College of Materials Science and EngineeringJilin UniversityChangchunPeople’s Republic of China

Personalised recommendations