A prediction model for titanium alloy surface roughness when milling with micro-textured ball-end cutters at different workpiece inclination angles
- 74 Downloads
Studies have found that milling with an inclined plane when using ball-end milling cutters can reduce heating of the cutting tool. It has also been found that micro-textures on the rake face can play a role in the reduction of friction and wear. Taking these things together, milling titanium alloy with micro-textured ball-end milling cutters with workpieces at an inclined angle can have a significant influence on tool wear and the surface quality of machined workpieces. We have therefore looked at the factors affecting the quality of machined surfaces using an orthogonal test and, in particular, the effect of different micro-texture parameters and different workpiece inclination angles. Through means of an extreme difference analysis, the primary and secondary relationship between micro-texture parameters, workpiece inclination angles, and surface roughness is assessed. The analysis focuses in particular on the distance between micro-pits, micro-pit diameter, the workpiece inclination angle, the distance between the first row of micro-pits and the cutter edge, and the depth of the micro pits. On the basis of the analysis, a model that can predict surface roughness is established that provides a means of optimizing micro-textured cutter design and machining inclination angles when milling titanium alloy.
KeywordsSurface roughness Titanium alloy Micro-textured ball-end cutters Workpiece inclination angles A prediction model
Unable to display preview. Download preview PDF.
This study was financially supported by the National Nature Science Foundation of China (No. 51375126).
- 1.Chen Z, Song G, Haiyan Z, Zhou L (2013) Modeling and predicting for surface topography considering tool wear in milling process[J]. Int J Adv Manuf Technol 68(9–12):2849–2860Google Scholar
- 2.Zhen W, Liang L, Yun QB et al (2011) Effects of micro textures on the friction properties of cemented carbide surfaces [J]. tool technology, 45 (1): 13–16Google Scholar
- 3.Chuang F (2015) Study on wear of cemented carbide ball end milling cutter based on titanium alloy [D]. Harbin University of Science and TechnologyGoogle Scholar
- 5.Dengwan L, Hongtao C, Yu S, Xu M, Chengming Z (2010) Study on surface roughness for titanium under cold blast machining [J]. Modern Manufacturing Engineering 9:12–15Google Scholar
- 6.Chengzhe J, Ertao C, Wu B (2014) Analyzing for surface roughness in machining Ti-alloy by turn-milling [J]. Tool Technology 48(2):74–76Google Scholar
- 8.Xunjun R, Changfeng Y, Jun TW, others (2010) Effect of ball-end milling structural parameters on surface integrity for titanium alloy milling[J]. Aeronautical Manufacturing Technology 1:81–84Google Scholar
- 9.Yang S, Wang H, Zhang Y, Zhang L (2016) Cutting performance evaluation of surface micro-texture ball end milling based on multi-objective decision making [J]. Journal of Harbin University of Science and Technology 21(6):1–5Google Scholar
- 10.Yang S, Wang Z, Zhang Y, Xie Y (2015) Finite element simulation for machining titanium alloy with micro-texture ball-end mill[J]. Journal of Shenyang University of Technology 37(5):530–535Google Scholar
- 11.Cai YS, Zhi ZY, Hua ZY, Xin T, Weiwei L (2017) Prediction on surface roughness of milling titanium alloy with micro-textured ball-nosed end mill[J]. Journal of Harbin University of Science & TechnologyGoogle Scholar