Advertisement

Analysis of flatness control capability based on the effect function and roll contour optimization for 6-h CVC cold rolling mill

  • Hongbo LiEmail author
  • Zhenwei Zhao
  • Jie Zhang
  • Ning Kong
  • Renren Bao
  • Shenghui Jia
  • Fei He
ORIGINAL ARTICLE
  • 24 Downloads

Abstract

The 6-high continuously variable crown (6-h CVC) cold rolling mill shows limited capability to control coupled edge and center waves for both narrow strip and ultra-wide strip production. In order to solve this problem, an integrated three-dimensional (3D) elastic-plastic finite element model (FEM) of rolls and strip is built to calculate the effect functions in consideration of work roll bending (WRB), intermediate roll bending (IMRB), and CVC intermediate roll shifting (IMRS) with different strip widths. A set of orthogonal vectors which is defined as eigenvectors is proposed to analyze the similarities and the complementarities of the effect functions. It is applied to study the flatness control characteristics of the cold rolling mill. Based on the analysis of flatness stress characteristics of different strip widths in the production, it is found that the similarities between the flatness stress and the eigenvectors of different strip widths are relative low. The flatness defects are difficult to be eliminated. From the relationship between IMRS and strip widths, a segmented CVC intermediate roll contour is then proposed and experimented in an industrial production. The proportion of coupled edge and center waves is decreased by 15.2%, and the overall flatness is reduced by 0.7 IU.

Keywords

6-h CVC cold rolling mill Effect function 3D FEM Flatness control Roll contour 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

This work is supported by “the National Key Technology R&D Program of the 12th Five-year Plan of China” (grant no. 2015BAF30B01) and “the Fundamental Research Funds For the central Universities” (grant no. FRF-BR-16-025A, FRF-TP-15-016A3). The authors also thank Wuhan Iron & Steel (Group) Corp. for the industrial experiments and financial support.

References

  1. 1.
    Wang XD, Li F, Li BH, Dong LJ, Zhang BH (2012) Design and application of an optimum backup roll contour configured with CVC work roll in hot strip mill. ISIJ Int 52:1637–1643.  https://doi.org/10.2355/isijinternational.52.1637 CrossRefGoogle Scholar
  2. 2.
    Ginzburg VB, Ballas R (2000) Flat roll fundamentals. Marcel Dekker, Inc., New YorkCrossRefGoogle Scholar
  3. 3.
    Linghu KZ, Jiang ZY, Zhao JW, Li F, Wei DB, Xu JZ, Zhang XM, Zhao XM (2014) 3D FEM analysis of strip shape during multi-pass rolling in a 6-high CVC cold rolling mill. Int J Adv Manuf Technol 74:1733–1745.  https://doi.org/10.1007/s00170-014-6069-z CrossRefGoogle Scholar
  4. 4.
    Huang HG, Shi YQ, Ren XY, Du FS (2014) Influence of initial crown of work roll on strip shape adjusting performance of ultra-wide 6-h CVC mill. Iron and Steel 49:88–93.  https://doi.org/10.13228/j.boyuan.issn0449-749x.2014.07.004 Google Scholar
  5. 5.
    Linghu KZ, Jiang ZY, Li F, Zhao JW, Yu M, Wang YQ (2014) FEM analysis of profile control capability during rolling in a 6-high CVC cold rolling mill. Adv Mater Res 988:257–262.  https://doi.org/10.4028/www.scientific.net/AMR.988.257 CrossRefGoogle Scholar
  6. 6.
    Liu HM, Zheng ZZ, Peng Y (2000) Computer simulation of the roll contact pressure character for 6-high CVC wide strip mill. Journal of Mechanical Engineering 36:69–73CrossRefGoogle Scholar
  7. 7.
    Li HB, Zhang J, Cao JG, Cheng FW, Hu WD, Zhang Y (2012) Roll contour and strip profile control characteristics for quintic CVC work roll. Journal of Mechanical Engineering 48:24–30CrossRefGoogle Scholar
  8. 8.
    Yang GH, Zhang J, Cao JG, Li HB, Huang QB (2016) Effect of different stands of 2180mm tandem cold rolling mill on shape control of products. J Beijing Inst Technol 36:1111–1116.  https://doi.org/10.15918/j.tbit1001-0645.2016.11.003 Google Scholar
  9. 9.
    Bao RR, Zhang J, Li HB, Jia SH, Liu HJ, Li XJ (2015) Influence of asymmetric flatness errors on strip wandering in continuous annealing lines. Iron and Steel 50:35–38.  https://doi.org/10.13228/j.boyuan.issn0449-749x.20140726 Google Scholar
  10. 10.
    Zhang QD, Huang LW, Zhou XM (2000) Comparative study on shape control technologies for wide strip mill. J Univ Sci Technol Beijing 22:177–181.  https://doi.org/10.13374/j.issn100-053x.2000.02.023 Google Scholar
  11. 11.
    Wang RZ, He AR, Yang Q, Zhao L, Dong HR (2006) Profile control capability of LVC work roll contour. Iron Steel 41:41–44.  https://doi.org/10.13228/j.boyuan.issn0449-749x.2006.05.010 Google Scholar
  12. 12.
    Wang QL, Sun J, Li X, Liu YM, Wang PF, Zhang DH (2018) Numerical and experimental analysis of strip cross-directional control and flatness prediction for UCM cold rolling mill. J Manuf Process 34:637–649.  https://doi.org/10.1016/j.jmapro.2018.07.008 CrossRefGoogle Scholar
  13. 13.
    Rosenthal D (1988) CVC technology on hot and cold strip rolling mills. Rev Met Cahiers D'Inform Tech 85:597–606.  https://doi.org/10.1051/metal/198885070597 Google Scholar
  14. 14.
    Bald W, Klamma K (1988) CVC technology for cold rolling mills-plant examples. Iron Steel Eng 65:24–28Google Scholar
  15. 15.
    Wang CS, Zhang YP, Zhang QD (1999) Application of evaluation function in cold mill shape control. Steel Rolling 4:28–30.  https://doi.org/10.13228/j.boyuan.issn1003-9996.1999.04.011 Google Scholar
  16. 16.
    Zhang YP, Wang CS (1999) Flatness control strategy on cold mill based on efficiency function. J Univ Sci Technol Beijing 21:195–197.  https://doi.org/10.13374/j.issn100-053x.1999.02.056 Google Scholar
  17. 17.
    Liu HM, Zhang XL, Wang YR (2005) Transfer matrix method of flatness control for strip mills. J Mater Process Technol 166:237–242.  https://doi.org/10.1016/j.jmatprotec.2004.08.018 CrossRefGoogle Scholar
  18. 18.
    Song L, Shen MG, Yang LP, Liu J, Wang JS, Chen XB (2016) Shape control dimensionality reduction efficiency inherited regulation method of cold rolling wide strip. Iron Steel 51:70–75.  https://doi.org/10.13228/j.boyuan.issn0449-749x.20150083 Google Scholar
  19. 19.
    Yan QT, Zhang J, Jia SH, Chu YG, Yang GH, Gong Y (2011) Research on analyzing the flatness adjusting capacity for cold mill and its application. J Mech Eng 47:77–81.  https://doi.org/10.3901/JME.2011.04.077 CrossRefGoogle Scholar
  20. 20.
    Ataka M (2015) Rolling technology and theory for the last 100 years: the contribution of theory to innovation in strip rolling technology. ISIJ Int 55:89–102.  https://doi.org/10.2355/isijinternational.55.89 CrossRefGoogle Scholar
  21. 21.
    Moazeni B, Salimi M (2015) Investigations on relations between shape defects and thickness profile variations in thin flat rolling. Int J Adv Manuf Tech 77:1315–1331.  https://doi.org/10.1007/s00170-014-6544-6 CrossRefGoogle Scholar
  22. 22.
    Lu C, Tieu AK, Jiang ZY (2002) A design of a third-order CVC roll profile. J Mater Process Technol 125:645–648.  https://doi.org/10.1016/S0924-0136(02)00373-4 CrossRefzbMATHGoogle Scholar
  23. 23.
    Li YL, Cao JG, Qiu L, Yang GH, He AR, Zhou YZ (2018) Research on ASR work roll contour suitable for all width electrical steel strip during hot rolling process. Int J Adv Manuf Tech 97:3453–3458.  https://doi.org/10.1007/s00170-018-2198-0 CrossRefGoogle Scholar
  24. 24.
    Cao JG, Chai XT, Li YL, Kong N, Jia SH, Zeng W (2017) Integrated design of roll contours for strip edge drop and crown control in tandem cold rolling mills. J Mater Process Technol 252:432–439.  https://doi.org/10.1016/j.jmatprotec.2017.09.038 CrossRefGoogle Scholar
  25. 25.
    Xu G, Liu XJ, Zhao JR, Xiong JW (2007) Analysis of CVC roll contour and determination of roll crown. J Univ Sci Technol Beijing 14:378–380.  https://doi.org/10.1016/S1005-8850(07)60075-9 CrossRefGoogle Scholar
  26. 26.
    Shang F, Li HB, Kong N, Zhang J, Hu C, Zhang C, Chen JF, Mitchell DRG (2017) Improvement in continuously variable crown work roll contour under CVC cyclical shifting mode. Int J Adv Manuf Technol 90:2723–2731.  https://doi.org/10.1007/s00170-016-9587-z CrossRefGoogle Scholar
  27. 27.
    Shang F, Li HB, Kong N, Zhang J, Hu C, Chen L, Zhang C, Chen JF (2016) CVC cyclical shifting mode and its working characteristics for the mills of CSP. Int J Adv Manuf Technol 87:1906–1917.  https://doi.org/10.1007/s00170-016-8602-8 CrossRefGoogle Scholar
  28. 28.
    Park H, Hwang S (2017) 3-D coupled analysis of deformation of the strip and rolls in flat rolling by FEM. Steel Res Int 88:1700227.  https://doi.org/10.1002/srin.201700227 CrossRefGoogle Scholar
  29. 29.
    Yu HL, Tieu K, Lu C, Deng GY, Liu XH (2013) Occurrence of surface defects on strips during hot rolling process by FEM. Int J Adv Manuf Technol 67:1161–1170.  https://doi.org/10.1007/s00170-012-4556-7 CrossRefGoogle Scholar
  30. 30.
    Bao RR, Zhang J, Li HB, Jia SH, Liu HJ, Xiao S (2015) Flatness pattern recognition of ultra-wide tandem cold rolling mill. Chin J Eng 37:6–11.  https://doi.org/10.13374/j.issn2095-9389.2015.s1.002 Google Scholar
  31. 31.
    Niu PF, Liu C, Li PF, Li GQ (2014) Optimized support vector regression model by improved gravitational search algorithm for flatness pattern recognition. Neural Comput Appl 26:1167–1177.  https://doi.org/10.1007/s00521-014-1798-3 CrossRefGoogle Scholar
  32. 32.
    Chen XR (1998) Historical backgrounds and present state of the least squares method. J Univ Chin Acad Sci 15:4–11Google Scholar
  33. 33.
    Li HB, Bao RR, Zhang J, Jia SH, Chu YG, Liu HJ (2016) Cluster analysis of strip flatness characteristics for ultra-wide cold rolling mill. Chin J Eng 38:1569–1575.  https://doi.org/10.13374/j.issn2095-9389.2016.11.009 Google Scholar
  34. 34.
    Ester M, Kriegel HP, Sander J, Xu XW (1996) A density-based algorithm for discovering clusters in large spatial databases with noise. In: The Second International Conference on Knowledge Discovery and Data Mining (KDD-96), Portland, USAGoogle Scholar
  35. 35.
    Li HB, Zhang J, Cao JG, Wang ZM, Wang Q, Zhang SS (2010) Analysis and selection of crown control ranges for CVC work rolls in CSP hot rolling. J Univ Sci Technol Beijing 32:118–122.  https://doi.org/10.13374/j.issn1001-053x.2010.01.002 Google Scholar
  36. 36.
    Liu GM, Di HS, Guang A (2008) Discussion on design of CVC roll profile and its equivalent crown. J North Univ 29:1443–1446Google Scholar
  37. 37.
    Wei GC, Cao JG, Zhang J, Hai JW, Chen G (2007) Optimization and application of CVC work roll contour on 2250 hot strip mills. J Cent South Univ 38:937–942Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  • Hongbo Li
    • 1
    Email author
  • Zhenwei Zhao
    • 1
  • Jie Zhang
    • 1
  • Ning Kong
    • 1
  • Renren Bao
    • 1
  • Shenghui Jia
    • 2
  • Fei He
    • 3
  1. 1.School of Mechanical EngineeringUniversity of Science and Technology BeijingBeijingPeople’s Republic of China
  2. 2.Wuhan Iron and Steel(Group) CorpWuhanPeople’s Republic of China
  3. 3.Collaborative Innovation Center of Steel TechnologyUniversity of Science and Technology BeijingBeijingPeople’s Republic of China

Personalised recommendations