Study of trajectory and experiment on steel polishing with elastic polishing wheel device
- 13 Downloads
Since the curvature of free-form surfaces are variable, it is difficult to guarantee the quality of the surface polished with traditional polishing technology. The chief aim of this paper is to investigate the features of an original elastic polishing wheel device. The polishing trajectory of the elastic polishing wheel was simulated to study the relationship between the uniformity of a kind of polishing trajectory and the ratio of rotational speed “i” which is the ratio of the velocity of the rotation and the revolution. Orthogonal experiment was carried out to explore the effect of various factors (rotational ratio, press amount h, speed of rotation, and granularity of abrasive grains) on surface roughness polished. The writer has come to the conclusion that i has an influence on the uniformity of polishing trajectory. The polishing coefficient of variation “CV” of i = 10.645751 is 32% lower than i = 10. Increasing the number of digits after the decimal point of i, the polishing track performs more uniform and densely. The experimental tests show that the influence of rotational ratio, press amount h, speed of rotation, and granularity of abrasive grains on surface roughness polished decreases progressively.
KeywordsFree-form surface Elastic polishing wheel device Uniformity of polishing trajectory Surface roughness
Unable to display preview. Download preview PDF.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflicts of interest.
- 1.Cheng HB, Feng ZJ, Wang YW (2005) Deterministic polishing of smooth and structured molds. Science in China Press 50:172–178Google Scholar
- 3.Christian B, Roland T, Richard Z, Christian W (2010) Development of a force controlled orbital polishing head for free form surface finishing. Springer Verlag 4(2):269–277Google Scholar
- 5.Steffen H, Lars L (2012) Cycloids for polishing along double-spiral toolpaths in configuration space. Int J Adv Manuf Technol 60(1):343–356Google Scholar
- 8.Ding JF, Li W, Yu FJ, Zhang KH (2006) Analysis and research on the polishing process of mold free-form surface. Mold Industry:67–71Google Scholar
- 13.Shi F, Dai YF, Peng XQ, Wang Z (2010) Magnetorheological polishing to eliminate grinding sub-surface damage layer of new technology. Optical Precis Eng:168–174Google Scholar
- 15.Ming SM, Zeng X, Jin MS, Tan DP, Dong J (2013) Analysis of processing methods and material removal characteristics of soft consolidation abrasive grains. J Mech Eng 5:173–181Google Scholar
- 16.Yu QS, Cheng Y, Hu SB (2013) Study on the processing method and material removal characteristics of soft consolidated particle group. J Mech Eng (5):173–181Google Scholar
- 17.Wu XJ, Sun SD (2011) Experimental study on correlation of grinding parameters of elastic abrasives. Mech Sci Technol 06:865–868Google Scholar
- 18.Tang J, Wang T, Chang Q, Zhang HT (2016) Design and analysis of flexible terminal actuator for mold polishing robot. Mech Des Manuf 02:263–266Google Scholar
- 20.Su JB, Liao HY, Su QS (2012) Research and development trend of robot mold polishing. Die Mold Ind 6:63–66Google Scholar
- 21.Wu XJ, Liu RP, Yu XZ, Wu Q (2015) Study on surface parameters model of M300 steel based on hertz theory. Surf Technol 6:109–114 119Google Scholar
- 22.Valentin LP Contact mechanics and friction physical principles and applications. Tsinghua University Press, Beijing, p 20Google Scholar