Advertisement

Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite

  • Muhammad Hassan SarfrazEmail author
  • Mirza Jahanzaib
  • Wasim Ahmed
  • Salman Hussain
ORIGINAL ARTICLE
  • 16 Downloads

Abstract

The current study aims to investigate the effects of process parameters on mechanical and microstructural characteristics of Al 6061-SiC composite fabricated via squeeze casting. Seventeen experiments in total have been conducted according to Box-Behnken experimental design which contained three process parameters (squeeze pressure, melt temperature, and SiC wt.%) while recording the responses including ultimate tensile strength, hardness, and percentage elongation. ANOVA (analysis of variance) was employed to evaluate the significance and prediction capability of mathematical models developed through regression analysis. The results indicate that squeeze pressure, melt temperature, and SiC wt.% significantly affect the responses whereas ductility is drastically reduced at higher concentrations of SiC reinforcement. SEM micrographs of failed test specimen have been found to be indicative of ductile fracture at higher levels of squeeze pressure and melt temperature. The multi-objective optimization problem has been transformed to an equivalent single-objective problem using grey relation analysis. The desirability analysis revealed optimum setting of process parameters which was confirmed to have improved the ultimate tensile strength by 1.61%, hardness by 1.56%, and percentage elongation by 11.11% as compared to the initial setting.

Keywords

Squeeze casting Aluminum matrix composite Al 6061 SiC RSM ANOVA GRA 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Reference

  1. 1.
    Sadagopan P, Natarajan HK, Kumar P (2018) Study of silicon carbide-reinforced aluminum matrix composite brake rotor for motorcycle application. Int J Adv Manuf Technol 94(1–4):1461–1475Google Scholar
  2. 2.
    Arulraj M, Palani P (2018) Parametric optimization for improving impact strength of squeeze cast of hybrid metal matrix (LM24–SiC p–coconut shell ash) composite. J Braz Soc Mech Sci Eng 40(1):2CrossRefGoogle Scholar
  3. 3.
    Taherzadeh Mousavian R, Azari Khosroshahi R, Yazdani S, Brabazon D, Boostani AF (2016) Fabrication of aluminum matrix composites reinforced with nano- to micrometer-sized SiC particles. Mater Des 89:58–70CrossRefGoogle Scholar
  4. 4.
    Ezatpour HR, Torabi Parizi M, Sajjadi SA, Ebrahimi GR, Chaichi A (2016) Microstructure, mechanical analysis and optimal selection of 7075 aluminum alloy based composite reinforced with alumina nanoparticles. Mater Chem Phys 178:119–127CrossRefGoogle Scholar
  5. 5.
    Gupta S, Giri A, Adhikari S, Srivastava V (2018) Development and characterization of in-situ aluminum–titanium carbide composites prepared by pneumatic powder injection route. In: TMS Annual Meeting & Exhibition. SpringerGoogle Scholar
  6. 6.
    Ghasali E, Alizadeh M, Ebadzadeh T (2016) Mechanical and microstructure comparison between microwave and spark plasma sintering of Al–B4C composite. J Alloys Compd 655:93–98CrossRefGoogle Scholar
  7. 7.
    Sharma P, Sharma S, Khanduja D (2016) Effect of graphite reinforcement on physical and mechanical properties of aluminum metal matrix composites. Part Sci Technol 34(1):17–22CrossRefGoogle Scholar
  8. 8.
    Adebisi AA, Maleque MA, Ali MY, Bello KA (2016) Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Compos Interfaces 23(6):533–547CrossRefGoogle Scholar
  9. 9.
    Baradeswaran A, Perumal AE (2014) Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites. Compos Part B 56:464–471CrossRefGoogle Scholar
  10. 10.
    Selvam JDR, Smart DR, Dinaharan I (2013) Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting. Mater Des 49:28–34CrossRefGoogle Scholar
  11. 11.
    Soltani S, Khosroshahi RA, Mousavian RT, Jiang Z-Y, Boostani AF, Brabazon D (2017) Stir casting process for manufacture of Al–SiC composites. Rare Metals 36(7):581–590CrossRefGoogle Scholar
  12. 12.
    David Raja Selvam J, Dinaharan I, Mashinini P (2017) High temperature sliding wear behavior of AA6061/fly ash aluminum matrix composites prepared using compocasting process. Tribology-Materials, Surfaces & Interfaces 11(1):39–46CrossRefGoogle Scholar
  13. 13.
    Jayakumar E, Jacob JC, Rajan T, Joseph M, Pai B (2016) Processing and characterization of functionally graded aluminum (A319)—SiC p metallic composites by centrifugal casting technique. Metall Mater Trans A 47(8):4306–4315CrossRefGoogle Scholar
  14. 14.
    Wang D, Zheng Z, Lv J, Xu G, Zhou S, Tang W, Wu Y (2017) Enhanced thermal conductive 3D-SiC/Al-Si-Mg interpenetrating composites fabricated by pressureless infiltration. Ceram Int 43(2):1755–1761CrossRefGoogle Scholar
  15. 15.
    Ghomashchi M, Vikhrov A (2000) Squeeze casting: an overview. J Mater Process Technol 101(1–3):1–9CrossRefGoogle Scholar
  16. 16.
    Sarfraz S, Jahanzaib M, Wasim A, Hussain S, Aziz H (2017) Investigating the effects of as-casted and in situ heat-treated squeeze casting of Al-3.5% cu alloy. Int J Adv Manuf Technol 89(9–12):3547–3561CrossRefGoogle Scholar
  17. 17.
    Baghi M, Niroumand B, Emadi R (2017) Fabrication and characterization of squeeze cast A413-CSF composites. J Alloys Compd 710:29–36CrossRefGoogle Scholar
  18. 18.
    Kannan C, Ramanujam R (2017) Comparative study on the mechanical and microstructural characterisation of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze casting. J Adv Res 8(4):309–319CrossRefGoogle Scholar
  19. 19.
    Dhanashekar M, Kumar VS (2014) Squeeze casting of aluminium metal matrix composites-an overview. Procedia Engineering 97:412–420CrossRefGoogle Scholar
  20. 20.
    Nie K, Deng K, Wang X, Wu K (2017) Characterization and strengthening mechanism of SiC nanoparticles reinforced magnesium matrix composite fabricated by ultrasonic vibration assisted squeeze casting. J Mater Res 32(13):2609–2620CrossRefGoogle Scholar
  21. 21.
    Kalkanlı A, Yılmaz S (2008) Synthesis and characterization of aluminum alloy 7075 reinforced with silicon carbide particulates. Mater Des 29(4):775–780CrossRefGoogle Scholar
  22. 22.
    Lu Y, Li J, Yang J, Li X (2016) The fabrication and properties of the squeeze-cast tin/al composites. Mater Manuf Process 31(10):1306–1310CrossRefGoogle Scholar
  23. 23.
    Shalaby EA, Churyumov AY, Solonin AN, Lotfy A (2016) Preparation and characterization of hybrid A359/(SiC+ Si3N4) composites synthesized by stir/squeeze casting techniques. Mater Sci Eng A 674:18–24CrossRefGoogle Scholar
  24. 24.
    Haider KMA, Mufti NA (2014) Mechanical and microstructural evaluation of squeeze cast Al-4% Cu alloy using a full-factorial experimental design. JOM 66(8):1446–1453CrossRefGoogle Scholar
  25. 25.
    Maleki A, Shafyei A, Niroumand B (2009) Effects of squeeze casting parameters on the microstructure of LM13 alloy. J Mater Process Technol 209(8):3790–3797CrossRefGoogle Scholar
  26. 26.
    Patel GC, Krishna MP, Parappagoudar M (2015) Modelling of squeeze casting process using design of experiments and response surface methodology. Int J Cast Metal Res 28(3):167–180CrossRefGoogle Scholar
  27. 27.
    Ipekoglu M, Nekouyan A, Albayrak O, Altintas S (2017) Mechanical characterization of B 4 C reinforced aluminum matrix composites produced by squeeze casting. J Mater Res 32(3):599–605CrossRefGoogle Scholar
  28. 28.
    Feng Y, Geng L, Zheng P, Zheng Z, Wang G (2008) Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting. Mater Des 29(10):2023–2026CrossRefGoogle Scholar
  29. 29.
    Patel GM, Mathew R, Krishna P, Parappagoudar MB (2014) Investigation of squeeze cast process parameters effects on secondary dendrite arm spacing using statistical regression and artificial neural network models. Procedia Technology 14:149–156CrossRefGoogle Scholar
  30. 30.
    Ali MA, Jahanzaib M, Wasim A, Hussain S, Anjum NA (2018) Evaluating the effects of as-casted and aged overcasting of Al-Al joints. Int J Adv Manuf Technol 96(1–4):1377–1392Google Scholar
  31. 31.
    Senthil P, Amirthagadeswaran K (2012) Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method. J Mech Sci Technol 26(4):1141–1147CrossRefGoogle Scholar
  32. 32.
    GC MP, Shettigar AK, Parappagoudar MB (2018) A systematic approach to model and optimize wear behaviour of castings produced by squeeze casting process. J Manuf Process 32:199–212CrossRefGoogle Scholar
  33. 33.
    Soundararajan R, Ramesh A, Sivasankaran S, Vignesh M (2017) Modeling and analysis of mechanical properties of aluminium alloy (A413) reinforced with boron carbide (B4C) processed through squeeze casting process using artificial neural network model and statistical technique. Materials Today: Proceedings 4(2):2008–2030CrossRefGoogle Scholar
  34. 34.
    Rajesh S, Devaraj D, Pandian RS, Rajakarunakaran S (2013) Multi-response optimization of machining parameters on red mud-based aluminum metal matrix composites in turning process. Int J Adv Manuf Technol 67(1–4):811–821CrossRefGoogle Scholar
  35. 35.
    Karnik S, Gaitonde V, Davim J (2008) A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling. Int J Adv Manuf Technol 38(9–10):868–883CrossRefGoogle Scholar
  36. 36.
    Pradhan M (2013) Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA. Int J Adv Manuf Technol 68(1–4):591–605CrossRefGoogle Scholar
  37. 37.
    Ragunath S, Velmurugan C, Kannan T (2017) Optimization of drilling delamination behavior of GFRP/clay nano-composites using RSM and GRA methods. Fibers and Polym 18(12):2400–2409CrossRefGoogle Scholar
  38. 38.
    Kala H, Mer K, Kumar S (2014) A review on mechanical and tribological behaviors of stir cast aluminum matrix composites. Procedia Mater Sci 6:1951–1960CrossRefGoogle Scholar
  39. 39.
    Su H, Gao W, Zhang H, Liu H, Lu J, Lu Z (2010) Optimization of stirring parameters through numerical simulation for the preparation of aluminum matrix composite by stir casting process. J Manuf Sci Eng 132(6):061007CrossRefGoogle Scholar
  40. 40.
    Testing, A.A.S.f. and Materials (2009) Standard test methods for tension testing of metallic materials. ASTM internationalGoogle Scholar
  41. 41.
    Kasman Ş, Saklakoglu IE (2012) Determination of process parameters in the laser micromilling application using Taguchi method: a case study for AISI H13 tool steel. Int J Adv Manuf Technol 58(1–4):201–209CrossRefGoogle Scholar
  42. 42.
    Mia M, Razi MH, Ahmad I, Mostafa R, Rahman SM, Ahmed DH, Dey PR, Dhar NR (2017) Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network. Int J Adv Manuf Technol 91(9–12):3211–3223CrossRefGoogle Scholar
  43. 43.
    Chang C-L, Tsai C-H, Chen L (2003) Applying grey relational analysis to the decathlon evaluation model. Int J Comput Internet Manage 11(3):54–62Google Scholar
  44. 44.
    Pradhan M (2013) Optimization of MRR, TWR and surface roughness of EDMed D2 Steel using an integrated approach of RSM, GRA and Entropy measutement method. in Energy Efficient Technologies for Sustainability (ICEETS), 2013 International Conference. IEEEGoogle Scholar
  45. 45.
    Adalarasan R, Santhanakumar M, Rajmohan M (2015) Application of Grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steel. Int J Adv Manuf Technol 78(5–8):1161–1170CrossRefGoogle Scholar
  46. 46.
    Azam M, Jahanzaib M, Wasim A, Hussain S (2015) Surface roughness modeling using RSM for HSLA steel by coated carbide tools. Int J Adv Manuf Technol 78(5–8):1031–1041CrossRefGoogle Scholar
  47. 47.
    Yue T (1997) Squeeze casting of high-strength aluminium wrought alloy AA7010. J Mater Process Technol 66(1–3):179–185CrossRefGoogle Scholar
  48. 48.
    Moćko W and Kowalewski ZL (2011) Mechanical properties of A359/SiCp metal matrix composites at wide range of strain rates. in Applied Mechanics and Materials. Trans Tech PublGoogle Scholar
  49. 49.
    Zhang M, Zhang W-w, Zhao H-d, Zhang D-T, Li Y-Y (2007) Effect of pressure on microstructures and mechanical properties of Al-Cu-based alloy prepared by squeeze casting. Trans Nonferrous Metals Soc China 17(3):496–501CrossRefGoogle Scholar
  50. 50.
    Aigbodion V, Hassan S (2007) Effects of silicon carbide reinforcement on microstructure and properties of cast Al–Si–Fe/SiC particulate composites. Mater Sci Eng A 447(1–2):355–360CrossRefGoogle Scholar
  51. 51.
    Gurusamy P, Prabu SB (2013) Effect of the squeeze pressure on the mechanical properties of the squeeze cast Al/SiCp metal matrix composite. Int J Microstruct Mater Prop 8(4–5):299–312Google Scholar
  52. 52.
    Bangaru M, Murugan TA, Arunachalam R (2015) Development of metal matrix nanocomposites of AA6061–SiCp using ultrasonic cavitations in squeeze casting process. In: ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical EngineersGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • Muhammad Hassan Sarfraz
    • 1
    Email author
  • Mirza Jahanzaib
    • 1
  • Wasim Ahmed
    • 1
  • Salman Hussain
    • 1
  1. 1.Department of Industrial EngineeringUniversity of Engineering and TechnologyTaxilaPakistan

Personalised recommendations