Advertisement

Study on process technology and surface integrity of 316L cardiovascular stents by fiber laser wet cutting

  • Xiaoyu Sun
  • Xiuting WeiEmail author
  • Zhiyong Li
  • Jinye Zhang
  • Yongqi Wang
ORIGINAL ARTICLE
  • 3 Downloads

Abstract

This paper presents an experiment of fiber laser wet cutting of 316L cardiovascular stents and investigates the relationship between process parameters(pulse width, laser power, frequency, cutting speed) and surface integrity indexes (surface topography, surface roughness, heat-affected zone (HAZ), recast layer, dross, subsurface nano-hardness). Furthermore, single-factor analysis method was performed to find optimal single-factor parameters. The experimental results demonstrate that surface integrity indexes as the function of process parameters and the optimum single-factor parameters could be obtained. In addition, the nano-hardness reflected the variation and nature of the HAZ and recast layer. This study is of great significance to obtain the minimum post-processing of cardiovascular stents.

Keywords

Cardiovascular stents 316L Fiber laser wet cutting Surface integrity Process technology 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

This study was supported by the NSFC (Grant No. 51775321) and Shandong Education Department about key research and development plan (public welfare) project (Grant No. 2017GGX30116).

References

  1. 1.
    Kathuria YP (2005) Laser microprocessing of metallic stent for medical therapy. J Mater Process Technol 170(3):545–555 https://www.sciencedirect.com/science/article/pii/S0924013605006412 CrossRefGoogle Scholar
  2. 2.
    Wang KD, Duan WQ, Mei XS, Wang WJ, Zhao SX (2011) Processing microhole by millisecond laser and the post-processing technology of recast layer. J Xi'an Jiaotong Univ 45(7):45–49 http://en.cnki.com.cn/Article_en/CJFDTOTAL-XAJT201107010.htm Google Scholar
  3. 3.
    Fan W, Gao F, Xie YJ (2012) Study on laser cutting technology of stainless steel coronary stent. Materials Review B 26(11):27–31 https://wenku.baidu.com/view/c952c74902d276a201292e2c.html Google Scholar
  4. 4.
    Meng H, Liao J, Zhou Y, Zhang Q (2009) Laser micro processing of cardiovascular stent with fiber laser cutting system. Opt Laser Technol 41:300–302. http://www.doc88.com/p-932469055874.html CrossRefGoogle Scholar
  5. 5.
    Fu CH, Liu JF, Guo A (2015) Statistical characteristics of surface integrity by fiber laser cutting of Nitinol vascular stents. Appl Surf Sci 353:291–299 http://www.doc88.com/p-3136626486878.html CrossRefGoogle Scholar
  6. 6.
    Li C, Nikumb S, Wong F (2006) An optimal process of femtosecond laser cutting of NiTi shape memory alloy for fabrication of miniature devices. Opt Lasers Eng 44(10):1078–1087 https://www.sciencedirect.com/science/article/pii/S0143816605001661 CrossRefGoogle Scholar
  7. 7.
    Huang H, Zheng HY, Lim GG (2004) Femtosecond laser characteristics of Nitinol. Appl Surf Sci 228:201–208 https://www.sciencedirect.com/science/article/pii/S0169433204000248 CrossRefGoogle Scholar
  8. 8.
    He WF, Li YH, Li W, Li YQ, Li QP (2011) Study on improving the fatigue performance of compressor blade by laser shock strengthening. Journal of Aerospace Power 26(7):1551–1556 https://wenku.baidu.com/view/582e769df524ccbff1218474.html Google Scholar
  9. 9.
    Xiao bing ZHANG (2002) The present state and perspective of laser drilling technology in turbine blades. Applied Lase 22(2):227–229 http://www.cnki.com.cn/Article/CJFDTOTAL-YYJG200202038.htm Google Scholar
  10. 10.
    Xiaobing ZHANG (2005) Laser drilling with 100ns~700ns YAG laser in nickel-based alloy. Applied Laser 25(2):90–92 http://www.docin.com/p-944702189.html Google Scholar
  11. 11.
    Muhammad N, Whitehead D, Boor A, Li L (2010) Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications. J Mater Process Technol 210(15):2261–2267 http://www.doc88.com/p-3887774503968.html CrossRefGoogle Scholar
  12. 12.
    Li C, Johnson D, Kovacevic R (2003) Modeling of waterjet guided laser grooving of silicon. Int J Mach Tool Manu 43(9):925–936 https://www.smu.edu/~/media/Site/Lyle/RCAM/Publications/Modeling%20of%20Waterjet%20Guided%20Laser%20Grooving%20of%20Silicon.ashx CrossRefGoogle Scholar
  13. 13.
    Mai T, Richerzhagen B, Snowdon PC, Wood D, Maropoulos PG (2007) The laser MicroJet (LMJ): a multi-solution technology for high quality micro-machining. Lasers and applications in science and engineering 6459:1–7 http://adsabs.harvard.edu/abs/2007SPIE.6459E..0PM Google Scholar
  14. 14.
    Manley J, Housh R, Wagner F, Richerzhagen B (2004) Water-guided lasers create clean cuts. Laser Focus World 40(5):15–18 https://www.researchgate.net/publication/234111175_Water-guided_lasers_create_clean_cuts Google Scholar
  15. 15.
    Richerzhagen B, Housh R, Wagner F, Manley J (2004) Water jet guided laser cutting: a powerful hybrid technology for fine cutting and grooving. Progress in Theoretical Chemistry and Physics. http://www.doc88.com/p-0197255011972.html
  16. 16.
    Richerzhagen B, Kutsuna M, Okada H, Ikeda T 2004 Waterjet-guided laser processing. LAMP 2002: International Congress on Laser Advanced Materials Processing. 91–94. https://www.deepdyve.com/lp/spie/waterjet-guided-laser-processing-VwUQgG7Wbp
  17. 17.
    Hock K, Adelmann B, Hellmann R (2012) Comparative study of remote fiber laser and water-jet guided laser cutting of thin metal sheets. Phys Procedia 39:225–231 https://ac.els-cdn.com/S1875389212025606/1-s2.0-S1875389212025606-main.pdf?_tid=677cc70e-e7b3-45f3-8056-2260f6f94116&acdnat=1539389131_d5c269e572040eb69ea86fe155f748e4 CrossRefGoogle Scholar
  18. 18.

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • Xiaoyu Sun
    • 1
  • Xiuting Wei
    • 1
    Email author
  • Zhiyong Li
    • 1
  • Jinye Zhang
    • 1
  • Yongqi Wang
    • 1
  1. 1.School of Mechanical EngineeringShandong University of TechnologyZiboChina

Personalised recommendations