Heat distribution in electric hot incremental sheet forming
- 12 Downloads
Electric hot incremental sheet forming (EHISF) is a technique based on the use of electric current to heat the metal sheet, it consists of a source of direct current (transformer), cables, tool, and plate constituting a closed circuit. According to Joule’s law, when the current travels from the tool to the plate, the current density generates heat. It is known that the mechanical and metallurgical proprieties of the materials are highly influenced by the temperature. Then it is important to know how the distribution of heat near the mobile heat source occurs. Recently, some researchers have suggested different techniques for calculating heat distribution as a function of a mobile source. In this paper, it discusses the temperature distributions when the source moves in relation to the conductive medium, comparing the equation proposal by Bejan the numerical simulation using an explicit finite element method, which has a suitable formulation for inserting the effects of temperature and strain rate in the material. The results show that for the conditions evaluated the model proposed by Bejan (Eq. 4) is very close to the results obtained by the numerical simulation. Moreover, as EHISF is a process with large deformations and time-consuming, it would be necessary to include the terms of the energy of plastic deformation (E) and also the loss by convection to better represent the distribution of heat in the plate.
KeywordsEHISF Numerical simulation Heat distribution
Unable to display preview. Download preview PDF.
- 4.Pacheco PAP, Silveira ME (2018) Numerical simulation of electric hot incremental sheet forming of 1050 aluminum with and without preheating. Int J Adv Manuf Technol 94:3097–3108. https://doi.org/10.1007/s00170-017-0879-8Google Scholar
- 5.Bejan A (1996) Heat Transfer, 1st edn. John Wiley & Sons, pp 147–161Google Scholar
- 7.Essa K (2011) Conventional spinning and single point incremental forming: numerical investigation and statistical analysis. LAP LAMBERT Academic Publishing GmbH & Co.KG, Saarbrücken ISBN ISBN 978-3-8454-4355-3Google Scholar
- 10.Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings 7th International Symposium on Ballistics, The Hague, 541–547Google Scholar
- 11.Abaqus Technology Brief (2012) Simulation of the ballistic perforation of aluminum plates with Abaqus/Explicit. Copyright Dassault Systèmes. Disponível em: < https://www.3ds.com/fileadmin/PRODUCTS-SERVICES/SIMULIA/RESOURCES/aero-ballistic-perforation-alumnium-plates-12.pdf >. Acessado em: 20/08/2018.
- 15.Gupta P, Jeswiet J (2018) Effect of temperatures during forming in single point incremental forming. Int J Adv Manuf Technol 95:3693–3706. https://doi.org/10.1007/s00170-017-1400-0Google Scholar