Longitudinal micro-waviness (LMW) formation mechanism on large optical surface during ultra-precision fly cutting

ORIGINAL ARTICLE
  • 36 Downloads

Abstract

During fly cutting of large aperture flat optical components, mid-spatial frequency micro-waviness is formed on the machined surface, which greatly affects the optical performance of the components. This study aims to explore the mechanism of formation of micro-waviness perpendicular to the feed direction, which is called longitudinal micro-waviness (LMW). A finite element model (FEM) of the ultra-precision fly cutting spindle system is developed to analyze the axial vibrations of the tool nose. The analysis shows that the formation of LMW is the result of coupling of the response of the spindle system and its higher order natural frequency response under the excitation of the tangential cutting force. The vibration frequency of the tool nose is closely related to the structure of the spindle system. By changing the stiffness of the cutting head, the frequency is significantly changed, and the LMW formed on the machined surfaces has a spatial period of 39.2 mm, which is out of the range of mid-spatial frequency waviness. This result has great significance in the design of fly cutting machines, and can be used to improve the quality of the optical surface and thereby improve the performance of large aperture flat optical devices.

Keywords

Fly cutting Aerostatic spindle system Micro-waviness Mid-spatial frequency 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The authors are grateful to Dr. Pengqiang Hu at the Harbin University of Science and Technology for his invaluable comments and suggestions. This work was financially sponsored by NSFC (Grant No. 51375122) and the Key laboratory foundation of high precision machining (Grant No. ZZ14002).

References

  1. 1.
    Wang X, Gao H, Chen Y, Guo D (2015) A water dissolution method for removing micro-waviness caused by spdt process on kdp crystals. Int J Ad Manufacturing Technol 85(5):1–14Google Scholar
  2. 2.
    Hou N, Zhang Y, Zhang L, Zhang F (2016) Assessing microstructure changes in potassium dihydrogen phosphate crystals induced by mechanical stresses. Scr Mater 113:48–50.  https://doi.org/10.1016/j.scriptamat.2015.10.002 CrossRefGoogle Scholar
  3. 3.
    Hawley-Fedder RA, Geraghty P, Locke SN, McBurney MS, Runkel MJ, Suratwala TI, Whitman PK (2004) NIF pockels cell and frequency conversion crystals. In Proceedings of SPIE 5341(1):121–126Google Scholar
  4. 4.
    Zhang Y, Zhang L, Liu M, Zhang F, Mylvaganam K, Liu W (2015) Understanding the friction and wear of kdp crystals by nanoscratching. Wear 332–333:900–906CrossRefGoogle Scholar
  5. 5.
    Wang S-F, Fu P-Q, Zhang F-H, An C-H et al (2014) Investigation of surface micro-waviness in single point diamond fly cutting. J Harbin Inst Technol ( New Series) 21(5):119–123Google Scholar
  6. 6.
    Chen M, Li M, Jiang W, Xu Q (2010) Influence of period and amplitude of microwaviness on kh2po4 crystal’s laser damage threshold. J Appl Phys 108(4):478–279Google Scholar
  7. 7.
    Chen M, Li M, Cheng J, Jiang W, Wang J, Xu Q (2011) Study on characteristic parameters influencing laser-induced damage threshold of kh(2)po(4) crystal surface machined by single point diamond turning. J Appl Phys 110(11):113103–1131037.  https://doi.org/10.1063/1.3664692 CrossRefGoogle Scholar
  8. 8.
    Chen M, Jiang W, Pang Q, Liu X (2010) Simulation of micro-nano processing induced surface defects influencing kdp laser damage threshold. High Power Laser Particle Beams 22(1):159–164.  https://doi.org/10.3788/HPLPB20102201.0159 CrossRefGoogle Scholar
  9. 9.
    Lee WB, Cheung CFA (2001) Dynamic surface topography model for the prediction of nano-surface generation in ultra-precision machining. Int J Mech Sci 43(4):961–991.  https://doi.org/10.1016/S0020-7403(00)00050-3 CrossRefMATHGoogle Scholar
  10. 10.
    Lee WB, Cheung CF, To, S (1999) Materials induced vibration in ultra-precision machining. J Mater Process Technol 89–90(8):318–325CrossRefGoogle Scholar
  11. 11.
    Cheung CF, Lee WB (2001) Characterisation of nanosurface generation in single-point diamond turning. Int J Mach Tool Manu 41(6):851–875.  https://doi.org/10.1016/S0890-6955(00)00102-4 CrossRefGoogle Scholar
  12. 12.
    Wang CC, Jang MJ, Yeh YL (2007) Bifurcation and nonlinear dynamic analysis of a flexible rotor supported by relative short gas journal bearings. Chaos, Solitons Fractals 32(2):566–582.  https://doi.org/10.1016/j.chaos.2005.10.098 CrossRefGoogle Scholar
  13. 13.
    Wang CC, Yau HT, Jang MJ, Yeh YL (2007) Theoretical analysis of the non-linear behavior of a flexible rotor supported by herringbone grooved gas journal bearings. Tribol Int 40(3):533–541.  https://doi.org/10.1016/j.triboint.2006.05.004 CrossRefGoogle Scholar
  14. 14.
    Chen D, Fan J, Zhang F (2012) Dynamic and static characteristics of a hydrostatic spindle for machine tools. J Manuf Syst 31(1):26–33.  https://doi.org/10.1016/j.jmsy.2010.11.006
  15. 15.
    Ni J (1985) Dynamic stability and debugging of aerostatic-pressurized bearings in magnetic disk comprehensive instrumentation. J Huazhong Univ Sci Technolog Med Sci 13(3):69–74Google Scholar
  16. 16.
    Khanfir H, Bonis M, Revel P (2005) Improving waviness in ultra precision turning by optimizing the dynamic behavior of a spindle with magnetic bearings. Int J Mach Tool Manu 45(7–8):841–848.  https://doi.org/10.1016/j.ijmachtools.2004.11.007 CrossRefGoogle Scholar
  17. 17.
    Frew DA, Scheffer C (2008) Numerical modelling of a high-speed rigid rotor in a single-aerostatic bearing using modified Euler equations of motion. Mech Syst Signal Process 22(1):133–154.  https://doi.org/10.1016/j.ymssp.2007.06.008 CrossRefGoogle Scholar
  18. 18.
    Takasu S, Masuda M, Nishiguchi T, Kobayashi A (1985) Influence of study vibration with small amplitude upon surface roughness in diamond machining. CIRP Ann Manuf Technol 34(1):463–467.  https://doi.org/10.1016/S0007-8506(07)61812-5 CrossRefGoogle Scholar
  19. 19.
    Cheung CF, Lee WB (2000) A theoretical and experimental investigation of surface roughness formation in ultra-precision diamond turning. Int J Mach Tool Manu 40(7):979–1002.  https://doi.org/10.1016/S0890-6955(99)00103-0 CrossRefGoogle Scholar
  20. 20.
    An CH, Zhang Y, Xu Q, Zhang FH, Zhang JF, Zhang LJ, Wang JH (2010) Modeling of dynamic characteristic of the aerostatic bearing spindle in an ultra-precision fly cutting machine. Int J Mach Tool Manu 50(4):374–385.  https://doi.org/10.1016/j.ijmachtools.2009.11.003 CrossRefGoogle Scholar
  21. 21.
    Fu P (2013) Characterization of the effect of fly cutting machine spindle properties on surface waviness and the development of a new dynamic testing system. Master thesis. Harbin Institute of TechnologyGoogle Scholar
  22. 22.
    Zhan l (2015) Simulation and experimental study of KDP crystal surface topography formation in ultra-precision fly cutting machining. Master thesis. Harbin Institute of TechnologyGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  • Maolu Wang
    • 1
  • Yong Zhang
    • 1
  • Shaowei Guo
    • 1
  • Chenhui An
    • 2
  1. 1.School of Mechatronics EngineeringHarbin Institute of TechnologyHarbinChina
  2. 2.Laser Fusion Research Center, CAEPMianyangChina

Personalised recommendations