Effect of process factors on the rabbit ear based on numerical simulation and experimental study in gear rolling
- 82 Downloads
- 3 Citations
Abstract
The “rabbit ear” defect, which is the protrusion on the tooth top of the blank, is a typical deformation characteristic in gear rolling and severely influences the forming quality of the formed gear. The main factors affecting the rabbit ear formation, including rolling feed of the gear roller, friction condition, and number of teeth on the gear roller, are demonstrated through analyzing the gear rolling process condition. In order to quantitatively describe the rabbit ear volume, a quantitative evaluation index of the rabbit ear volume was given. The effects of rolling feed of the gear roller, friction condition, and number of teeth on the gear roller on the rabbit ear volume were numerically simulated by Deform software. The effect of different rolling feeds of the gear roller on the rabbit ear volume was studied experimentally, which verified the reliability of the finite element simulation. The results can provide scientific evidences for establishing reasonable process parameters, and improving the forming quality in gear rolling.
Keywords
Gear rolling Rabbit ear Finite element simulation Experimental studyPreview
Unable to display preview. Download preview PDF.
Notes
Acknowledgements
This project was supported by the National Natural Science Foundation of China (Grant No. 51475271).
References
- 1.Neugebauer R, Putzl M, Hellfritzsch U (2007) Improved process design and quality for gear manufacturing with flat and round rolling. Annals CIRP 56:307–312CrossRefGoogle Scholar
- 2.Nagata E, Kurita N (2011) Form rolling method for involute gear CN 102294419 AGoogle Scholar
- 3.Owada K (1972) Roll forming of automobile gear (part 1). Precision Machinery 36:8–13Google Scholar
- 4.Sasaki H, Shinbutsu T, Amano S (2014) Three-dimensional complex tooth profile generated by surface rolling of sintered steel helical gears using special CNC form rolling machine. In: 11th international conference on Technology of Plasticity. Nagoya Congress Center, Nagoya, pp 316–321Google Scholar
- 5.Li J, Wang GC, Wu T (2016) Numerical simulation and experimental study of slippage in gear rolling. J Mater Process Technol 234:280–289CrossRefGoogle Scholar
- 6.Zheng WG, Chen D (2005) The situation of studying on techndogies of rolling plasticity forming for gears. J Plasticity Eng 12:43–46Google Scholar
- 7.Wu WH (2004) The manufacture of involute spline rolling. Mechanical Workers (cold) 26–26Google Scholar
- 8.Wang JL, Jin ZY, Liu SQ (2014) Dimension calculation of diameter before rolling for small modulus involute spline by cold roll forming. Mechanical Transmission 38:167–171Google Scholar
- 9.Sun YZ (2011) Virtual design and numerical analysis on cylindrical gear rolling process. Wuhan University of technology, WuhanGoogle Scholar
- 10.Liu ZQ (2012) Theoretical and experimental study on cold rolling precision forming of spline shafts. Lanzhou University of technology, LanzhouGoogle Scholar
- 11.Zhu XX, Wang BY, Yang LY, Zuo B, Li Z (2014) Effect of relative sliding on tooth profiles metal flow during gear roll forming. J Univ Sci Technol Beijing 36:246–251Google Scholar
- 12.Kamouneh AA, Ni J, Stephenson D, Vriesen R, DeGrace G (2007) Diagnosis of involute metric issues in flat rolling of external helical gears through the use of finite-element models. Int J Mach Tool Manu 47:1257–1262CrossRefGoogle Scholar
- 13.Wang GC, Li J (2015) A gear rolling forming method for improving the rabbit ear defect. CN104438993AGoogle Scholar
- 14.Li J, Wang GC, Wu T (2017) Numerical-experimental investigation on the rabbit ear formation mechanism in gear rolling. Int J Adv Manuf Technol 91:3551–3559CrossRefGoogle Scholar