Advertisement

Analytical modeling of residual stress in helical end milling of nickel-aluminum bronze

  • Ruihu Zhou
  • Wenyu YangEmail author
ORIGINAL ARTICLE

Abstract

The end milling of nickel-aluminum alloy has been widely applied to the manufacture of seawater applications, while the prediction of residual stress induced by this process is seldom reported. An analytical model of residual stress is proposed, based on mechanical loading and thermal loading during end milling. For the first time, the sequential discontinuous variable mechanical loading feature of end milling is taken into consideration. Also, the analytical model of stress field in the workpiece during cutting is analyzed which is intermediate variable to study residual stress. Model predictions are compared with experimental data and FEM method for cutting forces, cutting temperature, and residual stress.

Keywords

Residual stresses Analytical model End milling Stress field 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Thossatheppitak B, Uthaisangsuk V, Mungsuntisuk P, Suranuntchai S, Manonukul A (2014) Flow behaviour of nickel aluminium bronze under hot deformation. Mater Sci Eng A 604:183–119CrossRefGoogle Scholar
  2. 2.
    Ulutan D, Özel T (2011) Machining induced surface integrity in titanium and nickel alloys: a review. Int J Mach Tools Manuf 51:250–280CrossRefGoogle Scholar
  3. 3.
    Guo YB, Li W, Jawahir IS (2009) Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys: a state-of-art research review and analysis. Mach Sci Technol 13(3):437–470CrossRefGoogle Scholar
  4. 4.
    Denkena B, Nespor D, Böß V, Köhler J (2014) Residual stresses formation after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling. CIRP J Manuf Sci Technol 7(4):347–360CrossRefGoogle Scholar
  5. 5.
    Arrazola PJ, Özel T, Umbrello D, Davies M, Jawahir IS (2013) Recent advances in modelling of metal machining processes. CIRP Ann Manuf Technol 62(2):695–718CrossRefGoogle Scholar
  6. 6.
    Li B, Jiang X, Yang J, Liang SY (2015) Effects of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part. J Mater Process Technol 216:223–233CrossRefGoogle Scholar
  7. 7.
    Rao B, Dandekar CR, Shin YC (2011) An experimental and numerical study on the face milling of Ti–6Al–4V alloy: tool performance and surface integrity. J Mater Process Technol 211(2):294–304CrossRefGoogle Scholar
  8. 8.
    Jawahir IS, Brinksmeier E, M'Saoubi R, Aspinwall DK, Outeiro JC, Meyer D, Umbrello D, Jayal AD (2011) Surface integrity in material removal processes: recent advances. CIRP Ann Manuf Technol 60:603–626CrossRefGoogle Scholar
  9. 9.
    Merwin JE, Johnson KL (1963) An analysis of plastic deformation in rolling contact. Proc Inst Mech Eng 177:676–690CrossRefGoogle Scholar
  10. 10.
    McDowell DL (1997) Approximate algorithm for elastic–plastic two-dimensional rolling/sliding contact. Wear 211(2):237–246CrossRefGoogle Scholar
  11. 11.
    Jiang Y, Sehitoglu H (1994) An analytical approach to elastic–plastic stress analysis of rolling contact. J Tribol 116:577–587CrossRefGoogle Scholar
  12. 12.
    Jacobus K, DeVor RE, Kapoor SG (2000) Machining-induced residual stress: experimentation and modeling. Trans ASME 122:20–31Google Scholar
  13. 13.
    Liang SY, Su JC (2007) Residual stress modeling in orthogonal machining. CIRP Ann Manuf Technol 56(1):65–68MathSciNetCrossRefGoogle Scholar
  14. 14.
    Ulutan D, Alaca E, Lazoglu I (2007) Analytical modelling of residual stresses in machining. J Mater Process Technol 183:77–87CrossRefGoogle Scholar
  15. 15.
    Agrawal S, Joshi SS (2013) Analytical modelling of residual stresses in orthogonal machining of AISI4340 steel. J Manuf Process 15(1):167–179CrossRefGoogle Scholar
  16. 16.
    Yan L, Yang W, Jin H, Wang Z (2012) Analytical modeling of the effect of the tool flank wear width on the residual stress distribution. Mach Sci Technol 16:265–286CrossRefGoogle Scholar
  17. 17.
    Huang K, Yang W, Chen Q (2015) Analytical model of stress field in workpiece machined surface layer in orthogonal cutting. Int J Mech Sci 103:127–140CrossRefGoogle Scholar
  18. 18.
    Su J, Young KA, Ma K, Srivatsa S, Morehouse JB, Liang SY (2013) Modeling of residual stresses in milling. Int J Adv Manuf Technol 65(5–8):717–733CrossRefGoogle Scholar
  19. 19.
    Fergani O, Lazoglu I, Mkaddem A, El Mansori M, Liang SY (2014) Analytical modeling of residual stress and the induced deflection of a milled thin plate. Int J Adv Manuf Technol 75(1–4):455–463CrossRefGoogle Scholar
  20. 20.
    Fergani O, Jiang X, Shao Y, Welo T, Yang J, Liang S (2016) Prediction of residual stress regeneration in multi-pass milling. Int J Adv Manuf Technol 83(5–8):1153–1160CrossRefGoogle Scholar
  21. 21.
    Huang X, Zhang X, Ding H (2015) An analytical model of residual stress for flank milling of Ti-6Al-4V. Procedia CIRP 31:287–292CrossRefGoogle Scholar
  22. 22.
    Zhou R, Yang W, Yang K (2016) Force prediction models for helical end milling of nickel-aluminium bronze. Int J Adv Manuf Technol. doi: 10.1007/s00170-015-8261-1 CrossRefGoogle Scholar
  23. 23.
    Komanduri R, Hou ZB (2000) Thermal modeling of the metal cutting process: part I—temperature rise distribution due to shear plane heat source. Int J Mech Sci 42:1715–1752CrossRefGoogle Scholar
  24. 24.
    Lee S, Lee W (2005) Finite-element analysis on thermomechanical behavior of a marine propeller casting in the sand-casting process. J Mater Eng Perform 14(3):388–394CrossRefGoogle Scholar
  25. 25.
    Third Wave Systems, Inc (2010) AdvantEdge v5. 6–014 Machining simulation software. Minneapolis MNGoogle Scholar

Copyright information

© Springer-Verlag London 2016

Authors and Affiliations

  1. 1.State Key Laboratory of Digital Manufacturing Equipment and Technology, School of Mechanical Science and TechnologyHuazhong University of Science and TechnologyWuhanChina

Personalised recommendations