Advertisement

Research on surface topography in ultra-precision flycutting based on the dynamic performance of machine tool spindle

  • Xu Yang
  • Chenhui AnEmail author
  • Zhenzhong Wang
  • Quanjin Wang
  • Yunfeng Peng
  • Jian Wang
ORIGINAL ARTICLE

Abstract

The dynamic performance of ultra-precision cutting machine tools is an important factor for its machining accuracy. To improve the precision of the machine tool, a surface topography model is built in this paper and the tool path during the cutting process is achieved by dynamic finite element analysis (DFEA) of the air spindle in ANSYS, surface topography is obtained using MATLAB simulation by combing the model with the tool path, and an experiment is carried out for validation. Results show the simulation surface is highly consistent with the experimental result. Dynamic performance of the spindle is the main factor for texture generation, and optimization of spindle is investigated, DFEA of the optimized spindle shows better performance, and the connection mode between diamond tool and cutter head should be further studied.

Keywords

Ultra-precision cutting Air spindle Dynamic performance DEFA Surface topography 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Compliance with ethical standards

Grant

Ultra-precision Machining Technology Key Laboratory Major Fund of China Academy of Engineering Physics (Grant No. ZZ14002)

References

  1. 1.
    Komanduri R, Lucca DA, Tani Y (1997) Technological advances in fine abrasive process. Ann CIRP 46(2):545–595CrossRefGoogle Scholar
  2. 2.
    Taniguchi N (1983) Current status in and future trends of ultraprecision machining and ultrafine materials processing. Ann CIRP 32(2):573–582CrossRefGoogle Scholar
  3. 3.
    Tian FJ, Yin ZQ, Li SY (2015) Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrors. Int J Adv Manuf Technol 80(9–12):1759–1765CrossRefGoogle Scholar
  4. 4.
    Kim HC, Lee SG (2012) Development of machining technology for micropatterns with large surface area. Int J Adv Manuf Technol 58(9):1261–1270CrossRefGoogle Scholar
  5. 5.
    Kaishi SK (1998) Single point diamond turning of KDP inorganic non-linear optical crystal for laser fusion. J Japan Soc Precis Eng 64(10):1181–1185Google Scholar
  6. 6.
    Jasinevicius RG, Pizani PS, Cirino GA (2015) Ultraprecision machining of diffraction optical elements on soft semiconductor crystal. Int J Adv Manuf Technol 77(5–8):1145–1154CrossRefGoogle Scholar
  7. 7.
    Pramanik A, Littlefair G (2015) Developments in machining of stacked materials made of CFRP and titanium/aluminum alloys. Mach Sci Technol 18(4):485–508CrossRefGoogle Scholar
  8. 8.
    Tanaka H, Shimada S, Higuchi M, Yamaguchi T, Kaneeda T, Obata K (2005) Mechanism of cutting edge chipping and its suppression in diamond turning of copper. CIRP Ann Manuf Technol 54(1):51–54CrossRefGoogle Scholar
  9. 9.
    Yuan JL, Zhang FH, Dai YF, Kang RK, Yang H, Lü BH (2010) Development research of science and technologies in ultra-precision machining field. J Mech Eng 15(46):161–177, In ChineseCrossRefGoogle Scholar
  10. 10.
    Biju CV, Shunmugam MS (2014) Investigation into effect of particle impact damping (PID) on surface topography in boring operation. Int J Adv Manuf Technol 75(5):1219–1231CrossRefGoogle Scholar
  11. 11.
    Liang YC, Chen WQ, Bai QS, Sun YZ, Chen GD, Zhang Q, Sun Y (2013) Design and dynamic optimization of an ultraprecision diamond flycutting machine tool for large KDP crystal machining. Int J Adv Manuf Technol 69(237):244Google Scholar
  12. 12.
    Sun YZ, Chen WQ, Liang YC, An CH, Chen GD, Su H (2015) Dynamic error budget analysis of an ultraprecision flycutting machine tool. Int J Adv Manuf Technol 76(1215):1224Google Scholar
  13. 13.
    Akhondzadeh M, Vahdati M (2014) Study of variable depth air pockets on air spindle vibrations in ultra-precision machine tools. Int J Adv Manuf Technol 73(5):681–686CrossRefGoogle Scholar
  14. 14.
    Khajehzadeh M, Razfar MR (2015) FEM and experimental investigation of cutting force during UAT using multicoated inserts. Mater Manuf Process 30(7):858–867CrossRefGoogle Scholar
  15. 15.
    Chen MJ, Li MQ, Jiang W, Xu Q (2010) Influence of period and amplitude of micro-waviness on KH2PO4 crystal’s laser damage threshold. J Appl Phys 108(4):043109CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London 2016

Authors and Affiliations

  • Xu Yang
    • 1
    • 2
  • Chenhui An
    • 1
    Email author
  • Zhenzhong Wang
    • 2
  • Quanjin Wang
    • 2
  • Yunfeng Peng
    • 2
  • Jian Wang
    • 1
  1. 1.Chengdu Fine Optic Engineering Research CenterChengduChina
  2. 2.Department of Mechanical and Electrical EngineeringXiamen UniversityXiamenChina

Personalised recommendations