Additive manufacturing with secondary processing of curve-face gears

  • Chao LinEmail author
  • Yu Fan
  • Zhengwen Zhang
  • Guang Fu
  • Xijun Cao


In order to process curve-face gears with less material, simpler processes, and high profile accuracy, a method was proposed that uses additive manufacturing (AM) as the primary process, while computer numerical control (CNC) as the secondary process, i.e., obtaining the blanks of the curve-face gear pairs using additive manufacturing and then conducting secondary processing using five-axis CNC machining. The tooth profile coordinate system of the tool, the processing coordinate system of the curve-face gear, the model of rounded corner in addendum angle, the CNC machining model, and the rapid prototyping model were established by applying space gear meshing theory, five-axis CNC machining principles, and fundamental theories in additive manufacturing. The tool’s tooth profile equation, the coordinate transformation matrix from the tooth surface of the non-circular gear to that of the curve-face gear, the fillet surface equation, the five-axis motion equation during machining, and the coordinate transformation matrix during additive manufacturing were derived. The curve-face gear pair was machined by additive manufacturing with secondary CNC processing. Tooth surface measurement of the obtained gear pair was conducted. The results show that while materials wastage and number of processes involved are largely reduced, the tooth surface precision of additively manufactured gear pairs is significantly improved. The design for curve-face gear pairs and the method of additive manufacturing with secondary processing of curve-face gears were proved to be effective.


Face gear CNC machining Additive manufacturing Variable transmission ratio Design Transmission 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Supplementary material


(MOV 196347 kb)


  1. 1.
    Litvin FL, Zhang Y, Wang JC, Bossler RB, Chen YJ (1992) Design and geometry of face-gear drives. J Mech Des 114(4):642–647CrossRefGoogle Scholar
  2. 2.
    Bibel G (2002) Procedure for tooth contact analysis of a face gear meshing with a spur gear using finite element analysis. January, NASA/CR-2002.211277Google Scholar
  3. 3.
    Litvin FL, Fuentes A (2004) Gear geometry and applied theory. Cambridge University PressGoogle Scholar
  4. 4.
    Litvin FL, Fuentes A, Zanzi C, Pontiggia M (2002) Design, generation, and stress analysis of two versions of geometry of face-gear drives. Mech Mach Theory 37(10):1179–1211CrossRefzbMATHGoogle Scholar
  5. 5.
    Litvin FL, Gonzalez-Perez I, Fuentes A, Vecchiato D, Hansen BD, Binney D (2005) Design, generation and stress analysis of face-gear drive with helical pinion. Comput Methods Appl Mech Eng 194(36):3870–3901CrossRefzbMATHGoogle Scholar
  6. 6.
    Yang XY, Tang JY (2014) Research on manufacturing method of CNC plunge milling for spur face-gear. J Mater Process Technol 214(12):3013–3019CrossRefGoogle Scholar
  7. 7.
    Deng XZ, Li GG, Wei BY, Deng J (2014) Face-milling spiral bevel gear tooth surfaces by application of 5-axis CNC machine tool. Int J Adv Manuf Technol 71(5–8):1049–1057CrossRefGoogle Scholar
  8. 8.
    Shih YP, Huang YC, Lee YH, Wu JM (2013) Manufacture of face-hobbed straight bevel gears using a six-axis CNC bevel gear cutting machine. Int J Adv Manuf Technol 68(9–12):2499–2515CrossRefGoogle Scholar
  9. 9.
    Yanmei C, Zongde F, Jinzhan S, Xianzhang F, Xianlong P (2013) Precise modeling of arc tooth face-gear with transition curve. Chin J Aeronaut 26(5):1346–1351CrossRefGoogle Scholar
  10. 10.
    Tang JY, Yin F, Chen XM (2013) The principle of profile modified face-gear grinding based on disk wheel. Mech Mach Theory 70:1–15CrossRefGoogle Scholar
  11. 11.
    Guingand M, De Vaujany JP, Jacquin CY (2005) Quasi-static analysis of a face gear under torque. Comput Methods Appl Mech Eng 194(39):4301–4318CrossRefzbMATHGoogle Scholar
  12. 12.
    Zanzi C, Pedrero JI (2005) Application of modified geometry of face gear drive. Comput Methods Appl Mech Eng 194(27):3047–3066CrossRefzbMATHGoogle Scholar
  13. 13.
    Dudás I, Bodzás S (2013) Production geometry analysis, modeling, and rapid prototyping production of manufacturing tool of spiroid face gear. Int J Adv Manuf Technol 66(1–4):271–281CrossRefGoogle Scholar
  14. 14.
    Vlasea M, Shanjani Y, Bothe A, Kandel R, Toyserkani E (2013) A combined additive manufacturing and micro-syringe deposition technique for realization of bio-ceramic structures with micro-scale channels. Int J Adv Manuf Technol 68(9–12):2261–2269CrossRefGoogle Scholar
  15. 15.
    Strano G, Hao L, Everson RM, Evans KE (2013) A new approach to the design and optimisation of support structures in additive manufacturing. Int J Adv Manuf Technol 66(9–12):1247–1254CrossRefGoogle Scholar
  16. 16.
    Brøtan V (2014) A new method for determining and improving the accuracy of a powder bed additive manufacturing machine. Int J Adv Manuf Technol 74(9–12):1187–1195CrossRefGoogle Scholar
  17. 17.
    Monzón MD, Ortega Z, Martínez A, Ortega F (2015) Standardization in additive manufacturing: activities carried out by international organizations and projects. Int J Adv Manuf Technol 76:1111–1121CrossRefGoogle Scholar
  18. 18.
    Järvinen JP, Matilainen V, Li X, Piili H, Salminen A, Mäkelä I, Nyrhilä O (2014) Characterization of effect of support structures in laser additive manufacturing of stainless steel. Phys Procedia 56:72–81CrossRefGoogle Scholar
  19. 19.
    Fateri M, Hötter JS, Gebhardt A (2012) Experimental and theoretical investigation of buckling deformation of fabricated objects by selective laser melting. Phys Procedia 39:464–470CrossRefGoogle Scholar
  20. 20.
    Ning J, Ma T, Lin G (2014) A grid generator for 3-D explosion simulations using the staircase boundary approach in Cartesian coordinates based on STL models. Adv Eng Softw 67:148–155CrossRefGoogle Scholar
  21. 21.
    Yazhou W, Chibing H, Zaixin W, Yongping L (2013) Analytical research on pitch errors of non-circular gears. Huazhong Univ Sci Technol (Nat Sci Ed) 41(6):7–10Google Scholar

Copyright information

© Springer-Verlag London 2015

Authors and Affiliations

  • Chao Lin
    • 1
    Email author
  • Yu Fan
    • 1
  • Zhengwen Zhang
    • 1
  • Guang Fu
    • 1
  • Xijun Cao
    • 1
  1. 1.The State Key Laboratory of Mechanical TransmissionChongqing UniversityChongqingPeople’s Republic of China

Personalised recommendations