On a generalized approach to manufacturing energy efficiency

  • Apostolos Fysikopoulos
  • Georgios Pastras
  • Theocharis Alexopoulos
  • George Chryssolouris
Open Access
ORIGINAL ARTICLE

Abstract

Energy efficiency has become a very significant factor, requiring its inclusion in the manufacturing decision-making attributes. This paper proposes a generalized approach to manufacturing energy efficiency. The basic element of the approach is the division of energy efficiency definition and study into four manufacturing levels, namely process, machine, production line, and factory. Process-level definitions are provided for the majority of manufacturing processes. A machine-level study indicates and solves difficulties, generated by the workpiece geometry, and points out the interaction with the process level through factors, such as the process time. Moreover, machine tool peripherals are responsible for a significant portion of the consumed energy, and classification based on the dependence of their consumption on process variables is required. Studies made on the production line and factory levels show that energy efficiency, at these levels, is heavily dependent on production planning and scheduling and can be improved through the appropriate utilization of machines, with the inclusion of shutdown and eco-modes. Finally, a case study is presented, showing that many of the difficulties towards the optimization of energy efficiency can be dealt with successfully, using the proposed generalized approach.

Keywords

Energy efficiency Sustainable manufacturing Manufacturing processes Production planning Scheduling 

References

  1. 1.
    Chryssolouris G (2006) Manufacturing systems: theory and practice, 2nd edn. Springer, New YorkGoogle Scholar
  2. 2.
    Chryssolouris G, Papakostas N, Mavrikios D (2008) A perspective on manufacturing strategy: produce more with less. CIRP J Manuf Sci Technol 1:45–52CrossRefGoogle Scholar
  3. 3.
    Gutowski T, Dahmus J, Thiriez A (2006) Electrical energy requirements for manufacturing processes. In: 13th CIRP international conference on life cycle engineeringGoogle Scholar
  4. 4.
    Duflou JR, Sutherland JW, Dornfeld D, Herrmann C, Jeswiet J, Kara S, Hauschild M et al (2012) Towards energy and resource efficient manufacturing: a processes and systems approach. CIRP Ann Manuf Technol 61:587–609CrossRefGoogle Scholar
  5. 5.
    Int. Energy Agency (IEA) (2008) Worldwide trends in energy use and efficiency, key insights from IEA indicator analysis. http://www.iea.org/publications/freepublications/publication/Indicators_2008-1.pdf. Accessed 18 Sep 2013
  6. 6.
    EIA (2010) Annual energy review 2010:38 http://www.eia.gov/totalenergy/data/annual/archive/038410.pdf. Accessed 18 Sep 2013
  7. 7.
    Bay N, Azushima A, Groche P, Ishibashi I, Merklein M, Morishita M, Nakamura T et al (2010) Environmentally benign tribo-systems for metal forming. CIRP Ann Manuf Technol 59:760–780CrossRefGoogle Scholar
  8. 8.
    Li C, Jiang S, Zhang K (2012) Pulse current-assisted hot-forming of light metal alloy. Int J Adv Manuf Technol 63:931–938CrossRefGoogle Scholar
  9. 9.
    Duflou J R, Kellens K, Guo Y, Dewulf W (2012) Critical comparison of methods to determine the energy input for discrete manufacturing processes. CIRP Ann Manuf Technol 61:63–66CrossRefGoogle Scholar
  10. 10.
    Kara S, Li W (2011) Unit process energy consumption models for material removal processes. CIRP Ann Manuf Technol 60:37–40CrossRefGoogle Scholar
  11. 11.
    Mori M, Fujishima M, Inamasu Y, Oda Y (2011) A study on energy efficiency improvement for machine tools. CIRP Ann Manuf Technol 60:145–148CrossRefGoogle Scholar
  12. 12.
    Oda Y, Mori M, Ogawa K, Nishida S, Fujishima M, Kawamura T (2012) Study of optimal cutting condition for energy efficiency improvement in ball end milling with tool-workpiece inclination. CIRP Ann Manuf Technol 61:119–122CrossRefGoogle Scholar
  13. 13.
    Schlosser R, Klocke F, Lung D (2011) Sustainability in manufacturing—energy consumption of cutting processes. In: Advances in sustainable manufacturing. Springer, Heidelberg, pp 85–89Google Scholar
  14. 14.
    Li W, Winter M, Kara S, Herrmann C (2012) Eco-efficiency of manufacturing processes: a grinding case. CIRP Ann Manuf Technol 61:59–62CrossRefGoogle Scholar
  15. 15.
    Kellens K, Dewulf W, Duflou JR (2011) Preliminary environmental assessment of electrical discharge machining. In: Proceedings of the 18th CIRP international conference on life cycle engineering. doi:10.1007/978-3-642-19692-8_65
  16. 16.
    Somashekhar KP, Ramachandran N, Mathew J (2010) Material removal characteristics of microslot (kerf) geometry in -WEDM on aluminum. Int J Adv Manuf Technol 51:611–626CrossRefGoogle Scholar
  17. 17.
    Fysikopoulos A, Stavropoulos P, Salonitis P, Chryssolouris G (2012) Energy efficiency assessment of laser drilling process. Phys Procedia 39:776–783CrossRefGoogle Scholar
  18. 18.
    Al-Sulaiman F, Yilbas B, Karakas F, Ahsan M, Mokheimer E (2008) Laser hole cutting in Kevlar: modeling and quality assessment. Int J Adv Manuf Technol 38:1125–1136CrossRefGoogle Scholar
  19. 19.
    Behrendt T, Zein A, Min S (2012) Development of an energy consumption monitoring procedure for machine tools. CIRP Ann Manuf Technol 61:43–46CrossRefGoogle Scholar
  20. 20.
    Vijayaraghavan A, Dornfeld D (2010) Automated energy monitoring of machine tools. CIRP Ann Manuf Technol 59:21–24CrossRefGoogle Scholar
  21. 21.
    Huang B, Xing K, Abhary K, Spuzic S (2012) Development of energy-saving optimization for the oval-edging oval pass design using genetic algorithm. Int J Adv Manuf Technol 61:423–429CrossRefGoogle Scholar
  22. 22.
    Göschel A, Schieck F, Schönherr J (2012) Method for energy and resource balancing demonstrated as an example of the hot sheet metal production process. CIRP Ann Manuf Technol 61:399–402CrossRefGoogle Scholar
  23. 23.
    Helu M, Behmann B, Meier H, Dornfeld D, Lanza G, Schulze V (2012) Impact of green machining strategies on achieved surface quality. CIRP Ann - Manuf Technol 61:55–58CrossRefGoogle Scholar
  24. 24.
    Bruzzone A A G, Anghinolfi D, Paolucci M, Tonelli F (2012) Energy-aware scheduling for improving manufacturing process sustainability: a mathematical model for flexible flow shops. CIRP Ann - Manuf Technol 61:459–462CrossRefGoogle Scholar
  25. 25.
    Weinert N, Chiotellis S, Seliger G (2011) Methodology for planning and operating energy-efficient production systems. CIRP Ann - Manuf Technol 60:41–44CrossRefGoogle Scholar
  26. 26.
    Herrmann C, Thiede S, Kara S, Hesselbach J (2011) Energy oriented simulation of manufacturing systems—concept and application. CIRP Ann - Manuf Technol 60:45–48CrossRefGoogle Scholar
  27. 27.
    Herrmann C, Thiede S (2009) Process chain simulation to foster energy efficiency in manufacturing. CIRP J Manuf Sci Technol 1:221–229CrossRefGoogle Scholar
  28. 28.
    Harms R, Fleschutz T, Seliger G (2010) Life cycle management of production facilities using semantic web technologies. CIRP Ann - Manuf Technol 59:45–48CrossRefGoogle Scholar
  29. 29.
    Kellens K, Dewulf W, Overcash M, Hauschild MZ, Duflou JR (2011) Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI)-CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: methodology description. Int J Life Cycle Assess 17:69–78CrossRefGoogle Scholar
  30. 30.
    Umeda Y, Takata S, Kimura F, Tomiyama T, Sutherland JW, Kara S, Herrmann C et al (2012) Toward integrated product and process life cycle planning-an environmental perspective. CIRP Ann - Manuf Technol 61:681–702CrossRefGoogle Scholar
  31. 31.
    Papakostas N, Efthymiou K, Mourtzis D, Chryssolouris G (2009) Modeling the complexity of manufacturing systems using non-linear dynamics approaches. CIRP Ann - Manuf Technol 58:437–440CrossRefGoogle Scholar
  32. 32.
    Chryssolouris G, Efthymiou K, Papakostas N, Mourtzis D, Pagoropoulos A (2013) Flexibility and complexity: is it a trade-off? Int J Prod Res 51:6788–6802. doi:10.1080/00.2075432012.761362 CrossRefGoogle Scholar
  33. 33.
    Fysikopoulos A, Papacharalampopoulos A, Pastras G, Stavropoulos P, Chryssolouris G (2013) Energy efficiency of manufacturing processes: a critical review. Procedia CIRP 7:628–633CrossRefGoogle Scholar
  34. 34.
    Hon K.K.B (2005) Performance and evaluation of manufacturing systems. CIRP Ann - Manuf Technol 54:139–154CrossRefGoogle Scholar
  35. 35.
    Efthymiou K, Pagoropoulos A, Papakostas N, Mourtzis D, Chryssolouris G (2012) Manufacturing systems complexity review: challenges and outlook. Procedia CIRP 3:734–743Google Scholar
  36. 36.
    Patterson MG (1996) What is energy efficiency? Concepts, indicators and methodological issues. Energy Policy 24(5):377–390CrossRefGoogle Scholar
  37. 37.
    Wang Q, Liu F, Li C (2013) An integrated method for assessing the energy efficiency of machining workshop. J Clean Prod 52:122–133CrossRefMathSciNetGoogle Scholar
  38. 38.
    Cohen ER, Cvitas T, Frey JG, Holmstrm B, Kuchitsu K et al (2008) Quantities, units and symbols in physical chemistry. IUPAC green book, 3rd edn. IUPAC & RSC Publishing, Cambridge6Google Scholar
  39. 39.
    Gutowski T, Dahmus J, Thiriez A, Branham M, Jones A (2007) A thermodynamic characterization of manufacturing processes. In: Proceedings of the 2007 IEEE international symposium on electronics and the environment. doi:10.1109/ISEE.2007.369382
  40. 40.
    Bakshi B, Gutowski TG, Sekulic DP (2011) Thermodynamics and the destruction of resources. Cambridge University Press, New York, pp 163–189CrossRefGoogle Scholar
  41. 41.
    Renaldi, Kellens K, Dewulf W, Duflou J R (2012) On the implementation of energy efficiency metrics in discrete manufacturing system: the dissipative nature of production processes. Leveraging Technology for a Sustainable World. In: Proceedings of the 19th CIRP conference on life cycle engineering, pp 545–550Google Scholar
  42. 42.
    Fysikopoulos A, Anagnostakis D, Salonitis K, Chryssolouris G (2012) An empirical study of the energy consumption in automotive assembly. In: 45th CIRP conference on manufacturing systems, pp 540–547Google Scholar
  43. 43.
    Gutowski T, Murphy C, Allen D, Bauer D, Bras B, Piwonka T, Sheng P et al (2005) Environmentally benign manufacturing: observations from Japan, Europe and the United States. J Clean Prod 13:1–17CrossRefGoogle Scholar
  44. 44.
    Devoldere T, Dewulf W, Deprez W, Willems B, Duflou J (2007) Improvement potential for energy consumption in discrete part production machines. In: Proceedings of 14th CIRP conference on LCE, pp 311–316Google Scholar
  45. 45.
    Kahlenborn W, Kabisch S, Klein J, Richter I, Schrmann S (2010) DIN EN 16001: energy management systems in practice—a guide for companies and organisations. Bundesmi-nisterium fr Umwelt, Naturschutz und Reaktorsicherheit, Berlin, GermanyGoogle Scholar
  46. 46.
    ENEPLAN Project. http://www.eneplan.eu. Accessed 18 Sep 2013
  47. 47.
    Mouzon G, Yildirim MB, Twomey J (2007) Operational methods for minimization of energy consumption of manufacturing equipment. Int J Prod Res 45:4247–4271CrossRefMATHGoogle Scholar
  48. 48.
    Mouzon G (2008) Operational methods and models for minimization of energy consumption in a manufacturing environment. Dissertation, Wichita State UniversityGoogle Scholar
  49. 49.
    Glock C H (2012) The joint economic lot size problem: a review. Int J Prod Econ 135:671–686CrossRefGoogle Scholar
  50. 50.
    Müller E, Löffler T (2010) Energy efficiency at manufacturing plants—a planning approach. In: 43rd CIRP international conference on manufacturing systems, pp 787–794Google Scholar
  51. 51.
    Chryssolouris G, Pierce J, Dicke K (1992) A decision-making approach to the operation of flexible manufacturing systems. Int J Flex Manuf Syst 4:309–330CrossRefGoogle Scholar
  52. 52.
    Chryssolouris G, Subramaniam V (2001) Dynamic scheduling of manufacturing job shops using genetic algorithms. J Intell Manuf 12:281–293CrossRefGoogle Scholar
  53. 53.
    European Commission (2009) CT and energy efficiency the case for manufacturing. http://ec.europa.eu/information_society/ events/ict4ee/2009/docs/files/ec/ec/infso/g2/SmartManufacturing. pdf Accessed 18 Sep 2013Google Scholar
  54. 54.
    Tschätsch H (2009) Applied machining technology. Springer, New York. ISBN 978-3-642-01006-4CrossRefGoogle Scholar
  55. 55.
    Zeng J, Olsen J, Olsen C (1999) The abrasive water jet as a precision metal cutting tool. In: Proceedings of the 10th American water jet conference, pp 829–843Google Scholar

Copyright information

© The Author(s) 2014

Authors and Affiliations

  • Apostolos Fysikopoulos
    • 1
  • Georgios Pastras
    • 1
  • Theocharis Alexopoulos
    • 1
  • George Chryssolouris
    • 1
  1. 1.Laboratory for Manufacturing Systems and Automation, Department of Mechanical Engineering and AeronauticsUniversity of PatrasPatraGreece

Personalised recommendations